Author Topic: 3K/UHD 5D2 Raw development and Other Digic IV Cams  (Read 421659 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8303
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1425 on: September 26, 2021, 02:11:43 PM »
7D may be described as an oddball in ML world: Dual processor design and therefore some features are still missing. And ATM there is no serious development to solve dual Digic 4 processor issues.
Don't hold your breath!

ShittyWebsite

  • New to the forum
  • *
  • Posts: 28
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1426 on: September 26, 2021, 03:01:42 PM »
I see, thank you, i understand, old camera, not many people interested
i'm using Daniel Fort's magiclantern-raw_video_10bit_12bit_LVState.2019May15.7D203

It's quite good, 2.5k for about 450 frames,

I'm like this build for photos (rec trigger, half shutter pre only)
Silentpics: slow
Burst: good but low resolution (and many purple frames using crop)
Crop video: good resolution, no purple frames (but many useless frames)
Crop video + rec trigger: Good resolution, frames as needed

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8303
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1427 on: September 26, 2021, 03:18:53 PM »
To speed up Silent Pics use MLV, not DNG. See https://wiki.magiclantern.fm/camera_help#silent_pictures
Quote
Storing into MLV is considerable faster than writing DNG. Example: 7D, burst mode (94 pics). Writing DNG: 80 seconds Writing to MLV: 24 seconds

ShittyWebsite

  • New to the forum
  • *
  • Posts: 28
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1428 on: September 26, 2021, 03:23:59 PM »
Yeah, I'm using mlv, I mean the shutter speed, maybe I should buy a t5i and shoot 1 second of 4K and use as photo

dlprod2014

  • New to the forum
  • *
  • Posts: 6
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1429 on: September 26, 2021, 06:03:08 PM »
Hi
Can anyone recommend a stable build for 2.5k on the 5D2?

Thx in advance.
Joseph

kitor

  • Developer
  • Senior
  • *****
  • Posts: 350
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1430 on: September 27, 2021, 08:36:32 AM »
i understand, old camera, not many people interested

Nope, that's not what Walter said. 7D has a very different hardware design than any other supported ML camera.

In general, features of given generation can be easily, often even blindly ported into other models.

7D has two CPUs, each run it's own OS and they communicate with each other. Think of it not like your dual core / dual CPU computer running Windows/Linux/OSX, but more like two computers linked via a very fast network. CPUs share responsibilities that in "normal" circumstances are done by single OS on single CPU.

Thus porting features to 7D is significantly harder, requires knowledge specific to that one model and usually having one in hands to test if given idea works at all.
Too many Canon cameras.

Steadycamer

  • New to the forum
  • *
  • Posts: 11
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1431 on: January 02, 2022, 12:44:38 PM »
Hello

From the build of October 03 2020, I can't make digic iso working ( negative or positive value do not affect the picture ) Is there something Im missing to do ?

zcream

  • Freshman
  • **
  • Posts: 52
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1432 on: January 06, 2022, 07:39:59 PM »
in the process of moving right now , so all development  files are packed up , it was on bitbucket before they deleted it
Plus my FX pc mother board blow up , and it have all my files in a VM so it could be difficult getting them out of the old SSD .
Could be many mouths , not sure maybe fall .
GitHub is a better option than bitbucket.

Sent from my Lenovo TB-8703F using Tapatalk


Skinny

  • Member
  • ***
  • Posts: 166
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1433 on: March 14, 2022, 10:56:43 AM »
@reddeercity hi! if you are still here and following this thread, could you take a look at this https://www.magiclantern.fm/forum/index.php?topic=26414.msg238174#msg238174
if you can make a build with this option enabled I will gladly test all values from 0 to 0xFF :D

Or maybe some other guys who have all necessary tools installed can do this?

2blackbar

  • Hero Member
  • *****
  • Posts: 506
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1434 on: March 29, 2022, 07:55:09 PM »
Hey anyone knows what address i neeed to adjust to finetune shutterspeed on this camera  like on EOS M ?

Milk and Coffee

  • Member
  • ***
  • Posts: 120
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1435 on: March 30, 2022, 04:25:51 AM »
Similar question here: I like having 1/48 shutter speed, but it keeps me from getting 1/4000. How do I get 1/4000 back?
Canon 5D Mark II, Mac/OSX

kwstas

  • New to the forum
  • *
  • Posts: 10
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1436 on: May 01, 2022, 03:53:50 PM »
Hi guys,
trying to use 48fps, seems like I have a white area on bottom part I can't avoid. Any ideas? Not sure in which build should I place the modified modules.
K.

Skinny

  • Member
  • ***
  • Posts: 166
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1437 on: May 02, 2022, 12:54:07 PM »
Is this area exist on the captured footage also? 48 fps preset uses less height so you have part of the screen frozen, it is ok..

Modules will work with builds from the first page:
you need to download this ML build from december:
https://bitbucket.org/reddeercity/crop_rec_5d2_50d/downloads/crop_rec-4k3x1-2.8k24p_3x3-48p-all-centered_8.18pm-5D2-eXperimental.2019Dec31.5D2212.zip

then, download new mlv_rec.mo
https://bitbucket.org/reddeercity/crop_rec_5d2_50d/downloads/1880_3x3-2152_5xZoom-5d2_7-5-2020-5.59pm-mlv_rec.zip
and place it into "modules"

then download new crop_rec.mo
https://bitbucket.org/reddeercity/crop_rec_5d2_50d/downloads/5D2-4k1x3-3k1x1-2.8k1x1-48pfhd3x3_7-10-2020_8.42pm_crop_rec.zip
and also place it into modules

and finally download
https://bitbucket.org/reddeercity/crop_rec_5d2_50d/downloads/5D2_mlv_playraw_twk_10-3-2020_8.18pm.zip
and add it too.

All those links are from the first post.
This way you'll get all latest features.. Except the 5k build, which can only be used separately.

how to enable 48 fps with realtime preview:
Quote
It could be somewhat tricky... try first start in 3.5k with 5x zoom, make sure everything is ok. then switch to crop-mode "off" (and 5x zoom still active), make sure the preview is working, and then select 48fps. If you still don't get preview, switch again to "off" with 5x zoom, and then back to 48.. try it couple of times, it should work.. maybe it could be done easier, I don't know.

And make sure selected type of preview is "auto"

kwstas

  • New to the forum
  • *
  • Posts: 10
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1438 on: May 03, 2022, 03:17:09 PM »
thank you Skinny!  :) :)

kolodiazniy

  • Just arrived
  • *
  • Posts: 1
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1439 on: May 20, 2022, 01:39:02 PM »
Guys, I heed help:
just can`t get a 4096 X 592 resolution in 4K Anamorphic crop mode!
How to switch it on?

Vector54

  • New to the forum
  • *
  • Posts: 7
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1440 on: May 27, 2022, 12:41:44 AM »
Why you cant switch it on? You just need to select the option in the crop menu.