Canon EOS 1300D / Rebel T6

Started by the12354, October 03, 2016, 11:51:34 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Teksun

Just wanted to pop in and say thanks to the devs for making this available. On the install part, I could not get it to work the first time around. I did a firmware update to 1.1.0 even though that is what I had, which was earlier recommended, and it works perfectly (so far). Definitely not a pro but if I have any issues I will report them here. Thanks again!

ek_balam_2099

Hello,
First and foremost, thanks to all this community that works so hard. Now, I am trying to install ML on my T6 but I do have the latest firmware and I could not find the way to downgrade it: EOS Utility does not have the firmware feature and if I install multiple versions on a card, the camera won't let me proceed with the firmware install. Does anyone know a way to downgrade?
FYI: I tried with my firmware 1.2.0 and I got a black screen, remove batteries and then works.
In advance, thanks for the advice.

Paul2021

I've been using the latest version of magic lantern (2021Nov24.1300D110) for a week or two now. So happy with the features it's added. I can confirm the menu not loading whilst in video mode exists. Furthermore, the aspect ratio and video resolution displays N/A yet I can still change the aspect ratio but not the resolution. This does change the behaviour of video mode after I've set them and gone back to video mode. I'm using the mlv_rec raw video 2.0 btw. Also other than my sd card being slow? 20mb? Which is making it skip like three quarters of the frames, and the menu issue, it works alright too.

Is there any free software which I can use to process the mlv files coming from it?

ro4ers

Hi!

Don't have anything meaningful to add, just wanted to say I appreciate your efforts very much! Thanks for doing this!

The Penguin

I followed this thread since about a year and I was finally able to test Magic Lantern on my EOS 1300D. Thank you very much for the great work!

I found some bugs relating raw video (which is the reason why I want to use Magic Lantern):

- First, I can confirm that the magic lantern menu does not open in video mode.
- I tried both raw recording options. The module mlv_rec.mo (v.2.0) does not load. mlv_lite (v 1.1) loads but when hitting the record button in video mode I get a message "Occupied.. please wait" on to of the screen and a lot of errors showing: "Data corruption at slot 24".

I am using the newest version magiclantern-Nightly.2021Nov24.1300D110.zip

 

Calarificus

First timer here and I can't seem to get it to work, I have re-updated firmware to 1.1.0 and followed the directions from this google doc that was posted earlier.
https://docs.google.com/document/d/1PdUBSY9Ao1l8G-8axQo4XcFOP-bxDbqWvRK-hcXm0LY/edit?usp=sharing

Nothing happens when I boot up the camera, I have tried multiple times with re-doing the base firmware and reflashing the Magic Lantern firmware onto the SD. I am not sure what is wrong, desperately needing help can someone walk me step by step to get this to work?

Walter Schulz

Have you tried pressing the trashcan button?
https://wiki.magiclantern.fm/faq -> Usage

critix

On the 1300D, ML does not use the trash button to enter the menu, but the AV button, because the 1300D does not have a trash button.
Canon 1300D, 500D, EOS M, EOS M2

moloch

Quote from: The Penguin on December 27, 2021, 02:57:58 PM

- First, I can confirm that the magic lantern menu does not open in video mode.
- I tried both raw recording options. The module mlv_rec.mo (v.2.0) does not load. mlv_lite (v 1.1) loads but when hitting the record button in video mode I get a message "Occupied.. please wait" on to of the screen and a lot of errors showing: "Data corruption at slot 24".



To enter the menu in video mode press the AV and SET button at the same time.

The mlv_rec module works perfectly fine from the first day I use it.

critix

Canon 1300D, 500D, EOS M, EOS M2

names_are_hard

This confused me enough that I had to look it up.

The 1300D *does* have a Trash button.  It doesn't have a dedicated Trash button, it shares the same button as AV.

critix

Yes, you are right. That's how I was supposed to express myself.
Quote from: The Penguin on December 27, 2021, 02:57:58 PM
First, I can confirm that the magic lantern menu does not open in video mode.
I've solved this problem in the meantime. I'm going to release it.
Canon 1300D, 500D, EOS M, EOS M2

critix

I put a new version of ML for 1300D, which solves the problem of accessing ML in video mode.
The adtg and raw_diag modules also work (I haven't tested it much ... but so far I can see it's okay).
https://bitbucket.org/ccritix/magic-lantern-git/downloads/magiclantern-Nightly.2022Feb07.1300D110.zip

The ML source is at
https://github.com/ccritix/magic-lantern
Canon 1300D, 500D, EOS M, EOS M2

nikfreak

didn't check your code but I implemented a solution back then for OK / SET button on 100D - you can use it just in case you'd still need that
[size=8pt]70D.112 & 100D.101[/size]

critix

Unfortunately, I don't understand what you mean.
Canon 1300D, 500D, EOS M, EOS M2

scaramuzza

Quote from: critix on February 07, 2022, 10:07:16 AM
I put a new version of ML for 1300D, which solves the problem of accessing ML in video mode.
The adtg and raw_diag modules also work (I haven't tested it much ... but so far I can see it's okay).
https://bitbucket.org/ccritix/magic-lantern-git/downloads/magiclantern-Nightly.2022Feb07.1300D110.zip

The ML source is at
https://github.com/ccritix/magic-lantern

First of all: Hello everyone!

So, im new here, read a lot of stuff but i still confused on how do i use this. As far as i could see, theres some files missing at the zip file like the ML_SETUP.FIR

How do i install this build? Thanks!

Walter Schulz

No ML_SETUP.FIR for this build, sorry. Legal reasons.
Lookup reply #483 for installation guide.

GNUE4

Quote from: Walter Schulz on March 17, 2022, 06:08:36 AM
No ML_SETUP.FIR for this build, sorry. Legal reasons.
Lookup reply #483 for installation guide.
Can I compile it myself?

GNUE4

Quote from: Walter Schulz on March 17, 2022, 06:08:36 AM
No ML_SETUP.FIR for this build, sorry. Legal reasons.
Lookup reply #483 for installation guide.
I am a Chinese pupil,we can't visit Google

Walter Schulz



GNUE4

Quote from: Walter Schulz on March 20, 2022, 02:53:25 PM
Try https://wiki.magiclantern.fm/new-install
How to using firmware version 1.10?
My cam use 1.2.0 version firmware ,I can't "update" to 1.1.0
I can't connect the camera to my computer,

Walter Schulz

If you can't connect your camera to your computer at all: Sorry, we can't help you!
Most likely you just have to disable wireless options and use a USB cable certified for data transfer. Cables designed for charging only won't work.

Downgrading: First use Canon camera menu option.
If downgrading to 1.1.0 via camera menu doesn't work because camera tells you you are using an older version: Downgrading can be done using the "battery door" method.
https://www.magiclantern.fm/forum/index.php?topic=24926.msg231788#msg231788

GNUE4

Quote from: Walter Schulz on March 20, 2022, 06:06:31 PM
If you can't connect your camera to your computer at all: Sorry, we can't help you!
Most likely you just have to disable wireless options and use a USB cable certified for data transfer. Cables designed for charging only won't work.

Downgrading: First use Canon camera menu option.
If downgrading to 1.1.0 via camera menu doesn't work because camera tells you you are using an older version: Downgrading can be done using the "battery door" method.
https://www.magiclantern.fm/forum/index.php?topic=24926.msg231788#msg231788
It works! I install magic lantern success, and I taken my camera to school, I got some...    error logs. If I open the battery door, than close it, I can't normal boot up, it's going to report err 70,but when I half press shutter,it'boot up,I'll send these logs when I go home

How can I adding attachments on this Forum?

Vongz

Quote from: Calarificus on December 29, 2021, 05:57:52 AM
First timer here and I can't seem to get it to work, I have re-updated firmware to 1.1.0 and followed the directions from this google doc that was posted earlier.
https://docs.google.com/document/d/1PdUBSY9Ao1l8G-8axQo4XcFOP-bxDbqWvRK-hcXm0LY/edit?usp=sharing

Nothing happens when I boot up the camera, I have tried multiple times with re-doing the base firmware and reflashing the Magic Lantern firmware onto the SD. I am not sure what is wrong, desperately needing help can someone walk me step by step to get this to work?


I've tried the exact step as shown but it shows "Memory card containing firmware is required to update"