Author Topic: Canon 100D / SL1 (Read 677230 times)

IDA_ML · « **Reply #1800 on:** May 23, 2020, 05:03:59 PM »

If the battery gets too hot, this means that its internal resistance is too high, so the battery needs replacement. This usually happens at the end of the battery's life. I wouldn't worry too much about card or camera getting too hot but a battery with a fairly high internal resistance can transfer heat to the card and camera body.

Original Canon batteries are quite good w.r.t. low internal resistance but they are very expensive too. Please google replacement batteries for the 100D and buy batteries that have been bougth by many people. I bought a tetra pack several years ago for my 100D videos and have been quite happy with them. Never had an overheating problem but I rarely film continuous video.

Wlad81 · « **Reply #1801 on:** May 23, 2020, 09:07:29 PM »

I think it is the controller that hots a lot. Because the SD card is warmer than the battery.

iliush · « **Reply #1802 on:** May 23, 2020, 10:34:11 PM »

My bad experience with heating, finish with a dead camera. Meybe the cause was my lack in how to work with ML. In that specific case, the resurrection came with changing the card with a new one, with ML on it. The old card was later recognised by the SanDisk recovery program.

Mobet · « **Reply #1803 on:** June 24, 2020, 02:19:31 PM »

Hey, my live view screen is lagging and not all the option appear (enabling raw), im in manual mode.
Is it possible because im using ultra sd instead of extreme?

Walter Schulz · « **Reply #1804 on:** June 24, 2020, 04:25:42 PM »

No.
Lagging: Restore ML to factory defaults and retry.
Missing options: Which one? Screen snapshot, please!

BTS53 · « **Reply #1805 on:** July 12, 2020, 01:03:39 PM »

Hey Guys,

When i loan the firmware on the camera it says it is expecting a canon 100D with 100B firmware.. see pic attached.

I have the latest ML and Canon firmware so im not sure what Im misisng, Please help

Appreciate the site and what you are doing.

Im trying to use my 100D (SL1) with clean HDMI for live streaming, thats how I found ML.

Cheers
BT

Walter Schulz · « **Reply #1806 on:** July 13, 2020, 02:08:34 AM »

Reinstall firmware 1.0.1 using the file linked in
Top of page -> Downloads -> Download Nightly Builds -> Builds in progress -> 100D / Rebel SL1 -> Installation -> Item 1
and retry.

yokashin · « **Reply #1807 on:** July 27, 2020, 09:20:56 AM »

Quote from: Wlad81 on May 23, 2020, 09:07:29 PM

I think it is the controller that hots a lot. Because the SD card is warmer than the battery.

Once my 70d with ML installed broke. The service has repaired. I charged the batteries and inserted the sd card without installing the ML on the camera. In the morning the camera wouldn't turn on ... It turned out that the battery was dead. After charging the battery, I noticed when I left the camera hot from the battery. I sent back to the site. There was no damage or excessive power draw to my battery. I delivered my sd card. It turned out that the sd controller draws electricity. Everything returned to normal after the card format. Apparently, there are some small files on the sd card ... When you collect too many of them, the controller does not manage to read them even with the camera turned off ... I got this information on the Canon website.

canneloni · « **Reply #1808 on:** September 20, 2020, 06:22:50 PM »

Since Bitbucket changed to Git, the links to the builds for 100D don't work anymore. I looked in dannes Repo but couldn't find a download link. Since I'm on the road I won't be able to compile it myself.

Is there a download link somewhere which I didn't see?

Walter Schulz · « **Reply #1809 on:** September 20, 2020, 06:46:35 PM »

Have you tried the Internet Archive Wayback Machine?

Cipolippo · « **Reply #1810 on:** September 26, 2020, 07:30:16 PM »

Quote from: canneloni on September 20, 2020, 06:22:50 PM

Since Bitbucket changed to Git, the links to the builds for 100D don't work anymore. I looked in dannes Repo but couldn't find a download link. Since I'm on the road I won't be able to compile it myself.

Is there a download link somewhere which I didn't see?

Please...

yokashin · « **Reply #1811 on:** September 26, 2020, 09:06:08 PM »

https://web.archive.org/web/20200717085052/https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_100D_2020Jan19.100D101.zip

https://web.archive.org/web/20200717085052/https://bitbucket.org/Dannephoto/magic-lantern/downloads/

seiks · « **Reply #1812 on:** November 02, 2020, 12:19:23 AM »

Successfully installed ML on my SL1 and have clean HDMI out. But is there not setting to stop the camera from auto shutting down liveview after a few minutes? Was hoping I am missing something. Thx much!

Walter Schulz · « **Reply #1813 on:** November 02, 2020, 09:15:52 AM »

Top of page -> Downloads -> Downloads (drop down menu) -> Experiments -> Latest Lua updates + fixes
After installation
Prefs tab -> PowerSave in LiveView -> 30-minute timer Disable

seiks · « **Reply #1814 on:** November 10, 2020, 01:35:56 AM »

Thx so much. Almost there. Is there a way to prevent the image from getting cropped? It HDMI output has a black frame around it on all four sides.

Walter Schulz · « **Reply #1815 on:** November 10, 2020, 08:57:24 AM »

ATM: Sorry, nothing ML can do about it!

NatJones · « **Reply #1816 on:** June 02, 2021, 11:09:28 PM »

Hi Everyone, I know this thread is a bit dead, but I am new to Magic Lantern and trying to get it working. I'm not sure where the SL1/100D build currently sits.

I am looking for clean HDMI for video. I have ML loaded but can't seem to get get a solid, clean signal into OBS on Mac. When I do get the ML screens up over the link, I get a split second of clean video, then the ML menu continuously pops back up several times, eventually, the shutter closes and video turns off.

Any help would be appreciated.

Thanks!

Walter Schulz · « **Reply #1817 on:** June 29, 2021, 11:57:13 AM »

You read reply #1813?

theBilalFakhouri · « **Reply #1818 on:** April 27, 2022, 01:03:57 AM »

Looking for 100D updates?

Consider reading this:
https://www.magiclantern.fm/forum/index.php?topic=26250.msg238692#msg238692

I am trying to port to 100D:
-"4.5K/4.3K/4K/UHD 1x3" with real-time correct preview presets as in 700D which are the equivalent to "5K anamohpic frtp" on EOS M.
-3K 2.35:1 3072x1308 1:1, 2.5K 16:9 2560x1440p 1:1 modes.
-1920x1280p 1:1 with real-time correct preview.

-Also some more things:
Bilal's crop_rec_4k experiments for 650D / 700D (T4i / T5i)

theBilalFakhouri · « **Reply #1819 on:** June 06, 2022, 01:03:01 PM »

New custom build is available for 100D:

Bilal's crop_rec_4k experiments for 100D / SL1

DeafEyeJedi · « **Reply #1820 on:** June 06, 2022, 08:10:45 PM »

Thanks for this @theBilalFakhouri and I'll definitely get around on the 100D for testing/reporting.

News:

Author Topic: Canon 100D / SL1 (Read 677230 times)