Canon 100D / SL1

Started by nikfreak, October 19, 2015, 10:41:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Danne

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- refresh preset routines refined

Finally had some 100D time on my hands. Changing presets is a hustle on this cam but I think I addressed the issue and should work much better now. The anamorphic mode could still need a menu button push but the other modes should apply regs better than before(almost impossible sometimes)


Danne

Still some reg issues changing presets so I pushed yet another build. Link above updated.

Danne

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- Rearranged menu presets, most useful comes first.
- Included set 25fps preset in crop mode sub menu





Todo: add 2.35:1 preset to other modes besides anamorphic

Danne

dfort kindly updated pixel maps for the anamorphic mode for the 100D:
https://bitbucket.org/daniel_fort/ml-focus-pixels/downloads/

Put those map files inside Mlv App for activation.

Danne

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- Enable autofocus while recording same as for eosm:

Issue description:
https://www.magiclantern.fm/forum/index.php?topic=3064.msg213120#msg213120


Set af on in small hack menu under RAW video tab

ebrc

i tried the latest build, i ran the lua script and it seems ok,
but i can't record more than 1~2 sec, i guess my sd card is not overclocking,
memory patches are red for SD UHS and SDR104... i have a sandisk extreme pro 95 mbps

is there another information i should tell you?

Danne

You could try some older sd_uhs implementation which includes activation from menu.

Danne

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- Had a sd card which wouldn´t work at all with sd_uhs module so I took a dive to see if I could get it working. So it seems that some cards worked without SD_ReConfiguration(); but other didn´t so I put back parts of code that seems to affect this. This resulted in the sd_uhs patch working for that card again. Hopefully this means all reports about not having the direct patch working now working just as good as with the lua script versions.

Commit:
https://bitbucket.org/Dannephoto/magic-lantern/commits/ed816852c8926aeb5f24e4c1fbb2a1187a8b0b62

canneloni

The newest upload works perfectly with my SD-Card :) Thank you very much! The Anamorphic mode works fine as well, at least most of the time. Still have some problems with focus pixel, but I think I have to download dforts latest map files and install them into MLV App.
100D.100B ; Canon 18-55 STM ; Canon 50 1,8 II ; Canon 75-300 4,0 - 5,6 III ; Sigma 17-50 2,8

Danne

Cool :)
Pixel maps don't work I think. Apply chroma smooth cs3x3. This works.

OlRivrRat

           @Canneloni

Might be helpful to let us know what SD that is ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Danne

Well, did you test yet OlRivrRat? What card are you using yourself? If you test run the lua cinema script and record in anamorphic 2.39:1 for the test.

dfort

Quote from: Danne on June 26, 2019, 01:47:32 PM
Pixel maps don't work I think.

If you think they don't work, send me a short MLV file so I can check it out.

Danne

Gotta take a look. Hm, now when I think of it. Didn't you fix maps for 100D a while ago? Memory failure.

OlRivrRat

           @ Danne

Don't get any 'Formal' notification that sd_uhs is running & Bench'Tests are inconsistent >

On 4 seperate BnchTsts Writes are from 42.1 - 60.9 ~

Used Latest 22Jun Build on SanDisk ExtremePro 95MB/s U3 C10

      1st BnchTst      2nd BnchTst        4th BnchTst

Write      47.8            42.1            47.2

Read      71.7            49.0            58.7

Write      60.9            45.8            50.2

Read      71.8            49.0            58.9


Then Switched back to 8May Build to compare as that is when I had last tested >

      1st BnchTst      2nd BnchTst        3rd BnchTst

Write      51.1            52.8            51.1

Read      63.8            63.9            63.9

Write      47.2            49.3            53.2

Read      63.7            63.9            63.9
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Danne

Well, test it against the anamorphic mode after running the cinema lua script. It should be continuous. I don´t trust benchmarks with sd_uhs more than as crude indicators.

2blackbar

How did You do this test? non of the bench test modules i have work with latest builds, only with old ones.

OlRivrRat

      @Danne

   Not sure I'm understanding setup > But >

When I run Cinema script & make no further changes, LiveView is squished Horizontally

& I get Apparent Continuous (stop @ 1min) & the file is a smallish .mov ~

If I then turn on "Raw video", LiveView becomes Vertically squished

& I get Apparent Cont' (stop @ 1min) & the file is an expectedly large .MLV ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

OlRivrRat

           @ 2BlackBar

Using Bench.mo from 8 Jun 2018 ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Danne

Quote from: OlRivrRat on June 27, 2019, 09:34:57 PM
      @Danne

   Not sure I'm understanding setup > But >

When I run Cinema script & make no further changes, LiveView is squished Horizontally

& I get Apparent Continuous (stop @ 1min) & the file is a smallish .mov ~

If I then turn on "Raw video", LiveView becomes Vertically squished

& I get Apparent Cont' (stop @ 1min) & the file is an expectedly large .MLV ~

mov? How are you using your 100D? I never experienced a user with so many quirks.

Anyway. Do following:
1 - Enable following modules:
crop_rec.mo
mlv_lite.mo
lua.mo
sd_uhs.mo
mlv_play.mo
2 - restart camera and enter movie mode
3 - Enable mlv_lite then run the lua script calle cinema 2.39:1
4 - Record with this anamorphic mode. If more or less continuos I gurantee sd_uhs patch is working

OlRivrRat

           @Danne

"3 - Enable mlv_lite" ~

Since there is no "mlv_lite" choice I assume that You are referring to "RAW video" in the Movie tab ?

That seems to be working > Getting about 1478 frames in approx' 60sec's ~

'Tis amazing what can be accomplished when Proper Instructions are provided ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Danne


OlRivrRat

           @Danne

What Res should be indicated in "Raw video" with 2.39:1 chosen ?

I'm seeing 1736x726 ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Danne

Quote from: OlRivrRat on June 27, 2019, 11:23:16 PM
           @Danne

What Res should be indicated in "Raw video" with 2.39:1 chosen ?

I'm seeing 1736x726 ~
Hahaha, dude. Ask IDA_ML. I need a vacation.
Too funny...

OlRivrRat

ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)