Edited: Glitch issue when recording MLV / CANON 5D3

Started by jarabmx, July 08, 2015, 05:26:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jarabmx

Hi everyone,

I was hoping you could me with following glitches I get fairly often - they last for 1,2 frames and happen fairly often. Is that something I can tackle? I use 5D3 latest nightly build, Komputerbay 1066x 128GB cards and then process files with MysticMLV and After Effects to Prores.


https://infinit.io/_/AtX59YH

https://infinit.io/_/YyXvZMQ

I have tested MLVMystic nad Rawmagic and both produce same glitch so I suspect it happens while recording.

Thanks for any suggestions, I could not find a similar topic on here.

budafilms

- Check your setting: Global OFF, Foucs peaking OFF, etc.
- If the problem continuous, try to put other build.
- And test your card in ML menu.

jarabmx

Well, turning off focus peaking and global draw would mean losing two pretty esential functions.

How do you test the card in ML?

DeafEyeJedi

1-2 frames? Are you sure you are recording onto CF & not SD, right?

To test the card you can run Benchmark within ML and be sure to try one in playback mode as well as others if you want.

Reminder: RAWMagic is not supported here by ML (not sure about MLVmystic) but there are other decent converters out there that would do a better job anyway!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

jarabmx

Yes, recording long sequences to CF card, no spanning, ML is run from SD card.

Can you recommend me any other good converters? I vaguely remember seeing glitches even on the screen while recording so still think it occurs while recording.

mannfilm

Turn off everything, record. If you still have a problem, my bet is that you have a fake or damaged komputerbay CF.  (Lots of fake cards out there.) No problem, you have something weird turned on, or you got a bad nightly build.