Author Topic: Canon 60D (Read 231877 times)

aoseesink · « **Reply #25 on:** May 07, 2015, 04:27:46 PM »

Hi there!

First post, so bear with me if I ask silly things.

But I searched the forum and did not find anything about this. I want to know if anyone has experience with using ML on a Canon 60Da. As the 60D and the 60Da cameras are nearly identical I don' think there should be any negative impact of the difference, but I want to make sure before I do something wrong.

Thanks!

Alex

dmilligan · « **Reply #26 on:** May 07, 2015, 04:42:40 PM »

I use a 60Da. It works fine. The only difference between the two is the optical filter in front of the sensor. Electronically/internally they are identical.

aoseesink · « **Reply #27 on:** May 07, 2015, 04:45:07 PM »

Thanks for the reply... looks like i know what i'm doing this weekend!

DoubleK · « **Reply #28 on:** May 14, 2015, 07:55:19 PM »

Ok, so I've noticed quite a few people around asking specifically how to install ML who aren't able to do it, and the step that most are missing is actually updating the firmware once the files are on your SD card which is performed as follows. (If you've never updated your camera's firmware, you probably don't know how to install custom firmware, right?)

1) Make sure camera is in Manual mode (M)
2) Go to the third settings menu (Wrench icon w/ 3 dots)
3) Highlight the last line, which lists your firmware version (Should be 1.1.1 currently)
4) Click set, this will bring you to the firmware update screen
5) Click "OK"
6) Magic Lantern will install
7) Restart your camera.

I hope this has helped some folks!

sakkeus83 · « **Reply #29 on:** May 15, 2015, 07:14:37 PM »

Hi,

I installed the nigtly build 2015-05-03 01:15:02 +0300 on my 60D, but I cannot find the raw mode. Is it there?

Walter Schulz · « **Reply #30 on:** May 15, 2015, 08:10:44 PM »

Module tab ...

jwdavis15 · « **Reply #31 on:** May 23, 2015, 12:14:57 AM »

My question is twofold.

I was trying to use ML on multiple cards and went through the process as outlined. However, I was only able to get it to work on the original card. After an hour of trying to figure it out, in my frustration, I accidentally did a deep format on the original card. Now ML does not work on any card. The real problem is that now the firmware update menu option has disappeared. So now I can't uninstall/reinstall ML from ANY card.

Any idea what I should do? And possibly why I couldn't use multiple cards?
Thanks

Walter Schulz · « **Reply #32 on:** May 23, 2015, 06:34:06 AM »

Dial M for ... Redo installation for all cards

robert.raderschatt · « **Reply #33 on:** May 25, 2015, 01:14:02 PM »

Hi there,

when filming with the 60D I always used the VAF-60D Anti Moiré Filter by Mosaic Engineering. It really extinguishes the unwanted aliasing/moiré from the footage and gives it a professional look (see http://mosaicengineering.com/products/vaf/60d/main.html). Now I am changing to the Blackmagic Design Pocket Cinema Camera and don't need it anymore. I payed € 323,96 for it and I would like to sell it for € 200 incl. free shipping.

Regards,
Robert

Walter Schulz · « **Reply #34 on:** July 06, 2015, 12:34:53 AM »

No, there is no proof or guarantee your camera will not get harmed and if it breaks you can keep both parts.
There is however no report about ML nightly build actually killing a single camera. You can be the first, though.
If you can't live without your cam and will be unable to get a replacement ... well, think it over.

mark35mi · « **Reply #35 on:** July 06, 2015, 09:14:01 PM »

I have had ML installed for awhile. I use it for HDR mostly. Playing more with it now. Want to shoot lightning. Photo not video. Tips?

Anyways.... i have version v2.3.60d.111
Built on 2012-07-23

Any benefits to updating? What to download to update?
I do not see any secure / approved / builds.... just nightly builds.

Any help / suggestions appreciated.

And yes, I am shooting a 60D. Thanks

Walter Schulz · « **Reply #36 on:** July 06, 2015, 09:20:39 PM »

"Stable" v2.3 is considered to be unstable/outdated. Nightly build is the new black.
Devs using something close to "rolling release" (look it up at wikipedia) for some time now. So don't expect to see something like 2.4 or else in near future.
With nightly there is a module at hand: http://www.magiclantern.fm/forum/index.php?topic=6303.msg48426#msg48426

Walter Schulz · « **Reply #37 on:** July 08, 2015, 06:19:09 PM »

1.) Top of page -> User Guide -> FAQ
2.) Dito and Top of page -> User Guide -> Installation Guide
3.) Sorry, no ML 101 available right now.
http://www.magiclantern.fm/forum/index.php?topic=11269.0

Walter Schulz · « **Reply #38 on:** July 08, 2015, 08:44:28 PM »

Do you try to understand exposure modes used by "native" Canon firmware?
- Center-weighted average, spot metering, partial metering, evaluative metering
- Flash ETTL-2 modes "Evaluative", "Average"?

dmilligan · « **Reply #39 on:** July 09, 2015, 07:00:14 PM »

Canon does not publish their source code. If you simply want to understand what the various modes are for and when to use them, I would refer you to p119 in your manual.

kutten · « **Reply #40 on:** September 20, 2015, 08:42:19 AM »

Hi Installed ML on my 60d today,

there is no bulb ramping?

I used ML a few years ago and loved the bulb ramping intervalometer combo, but I can see it in the menu anywhere?

Walter Schulz · « **Reply #41 on:** September 20, 2015, 08:57:56 AM »

Gone for good.
Top of page, a little way down
Home - Help - Search - Profile - My ...

Bethanyl · « **Reply #42 on:** March 01, 2016, 12:40:56 AM »

I downloaded this because my camera keeps shutting off. Which it didn't fix but also, when recording it seems to record at 2x speed? Any thoughts? This is on a 60d

Audionut · « **Reply #43 on:** April 14, 2016, 12:35:06 AM »

@dfort has a build for the 60D to fix the mv640crop mode video. He needs a someone with a 60D to help him test it.

http://www.magiclantern.fm/forum/index.php?topic=12608.msg165718#msg165718

tolga1970 · « **Reply #44 on:** April 14, 2016, 10:32:09 AM »

installed on my 60D last week. afew video settings in ML caused 60D to crash : ERROR 70

didnt save log files due to me going into panic mode thinking that 60D was about to get bricked.......shutdown camera and started up, still error 70....

shutdown and pulled battery out and restarted and ML presented with camera didnt shutdown properly and last config files didnt save and gave the option to delete the last config.....hit that yes button super fast and default ML settings took place......phewww

Battery definitely drains ALOT faster with ML, there are some really nifty tweaks that im not familiar with...luckily google and Youtube is my friend.

is there a complete list to what each setting or module does as that would be super helpful as half of the help files are not complete or exists on ML when intalled.

Walter Schulz · « **Reply #45 on:** April 14, 2016, 10:45:33 AM »

Quote from: tolga1970 on April 14, 2016, 10:32:09 AM

Battery definitely drains ALOT faster with ML,

Each and every time someone comes up with this one and we are trying to nail it down the issue is no longer reproducable. If your incident is we will be more than happy to hunt it down.
Please give steps to reproduce and measurements/battery uptime with/w.o. ML.

Quote from: tolga1970 on April 14, 2016, 10:32:09 AM

is there a complete list to what each setting or module does as that would be super helpful as half of the help files are not complete or exists on ML when intalled.

Top of page -> User Guide
Top of page -> Downloads -> Download Nightly Builds -> Features

dfort · « **Reply #46 on:** April 22, 2016, 02:07:04 AM »

I'm still working on the mv640crop issue. Looking for testers:

http://magiclantern.fm/forum/index.php?topic=12608.msg165718#msg165718

rodbrady · « **Reply #47 on:** July 16, 2016, 04:20:15 AM »

I've installed ML on my 60D with no issues. Now, how do I make it work with additional SD cards?

Walter Schulz · « **Reply #48 on:** July 16, 2016, 06:15:48 AM »

Top of page -> User Guide -> Install Guide

vincent79 · « **Reply #49 on:** July 25, 2016, 05:34:57 PM »

Hello,
I'm trying to uninstall magic lantern (ML version : Nightly.2016Apr19.60D111) from my camera but the "firmware version" menu has disappeared.
I don't know what to do. Any help?

News:

Author Topic: Canon 60D (Read 231877 times)

dfort