Author Topic: Canon 5D Mark III / 5D3 / Firmware 1.1.3  (Read 175334 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7800
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #275 on: September 19, 2020, 09:01:35 PM »
It seemed to me that there are some focus pixels in the frame. I've also tried to fix bad pixels, but it didn't work. What am I to do?

Giving the community something to look at may be helpful to analyze your problem. Verbal description doesn't work.

wib

  • Freshman
  • **
  • Posts: 98
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #276 on: November 10, 2020, 10:38:06 PM »
Could you, please, be so kind to tell me if there are any focus pixel maps for 5D3 1.1.3 1080 full sensor? Cannot delete focus pixels in MLVApp.

or maybe you have hot pixels, which can be fixed as wall as in mlvapp or davinci.
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

Wlad81

  • Member
  • ***
  • Posts: 112
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #277 on: December 20, 2020, 11:23:13 PM »
Is it possible to implement h.264 4:2:2 10 bit recording for this camera?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML 1.1.3) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7800

Wlad81

  • Member
  • ***
  • Posts: 112
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #279 on: December 23, 2020, 09:26:08 PM »
So what am I to search there for?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML 1.1.3) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7800
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #280 on: December 23, 2020, 09:30:55 PM »
In short: You can't get 10 bit H.264 recording because there is no hardwired processing unit to do so. And Digic 5 processor won't be able to do it in Real Time.

Wlad81

  • Member
  • ***
  • Posts: 112
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #281 on: December 29, 2020, 11:18:43 PM »
Thank you.

Cannot find a link to an interactive page that shows graphically the frame size and the needed write speed.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML 1.1.3) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7800
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #282 on: December 30, 2020, 03:07:58 AM »
I hope you can do without graphics.
Write speed needed for H.264 modes: Manual
Write speed needed for MLV modes: Shown in bottom lines while adjusting resolution. Or RAW Calculator
Or build your own:
Horizontal x vertical resolution x frame rate x bit depth x compression ratio / 8 = Bandwidth in Bytes/s.

Compression ratio = 1 without compression.
Compressio used: Typical between 0.4 and 0.6, depending on scene.

Wlad81

  • Member
  • ***
  • Posts: 112
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #283 on: January 22, 2021, 09:51:28 PM »
Cannot get the camera working at 1920 50p mode for more than 15-20 sec. The settings are: autofocus off, stab off, 720 50p in Canon menu is on, Kill GlobalDraw is on, Card Spanning is on, SD is overclocked. I've tried ALL-I and IBP modes.

Anyway, it gives the following:

Code: [Select]
ML ASSERT:
0
at mlv_lite.c:2724 (compress_task), task compress_task
lv:1 mode:3

compress_task stack: 1ae530 [1ae5c0-1ad5c0]
0x0006A01C @ b45a8c:1ae560
0x00069878 @ 6a084:1ae530

Magic Lantern version : Nightly.2020Jul15.5D3113
Mercurial changeset   : 8f38ee536de0+ (crop_rec_4k_mlv_snd_isogain_1x3_presets) tip
Built on 2020-07-15 19:47:31 UTC by danne@danands-MBP.
Free Memory  : 213K + 3107K

There are compression errors.

What am I to do?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML 1.1.3) + SanDisk Extreme Pro 128 GB (CF).

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7104
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #284 on: January 22, 2021, 09:55:57 PM »
Wrong thread but I donĀ“t think higher frame rates modes plays nicely with cardspanning ON so start by setting that to off.

Wlad81

  • Member
  • ***
  • Posts: 112
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #285 on: January 23, 2021, 10:35:06 PM »
Done that, set Bit depth to 10 bit, and the mode works. Thank you!
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML 1.1.3) + SanDisk Extreme Pro 128 GB (CF).

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7104
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #286 on: January 23, 2021, 10:41:22 PM »
Yes, that should do the trick  8).

Wlad81

  • Member
  • ***
  • Posts: 112
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #287 on: January 23, 2021, 10:50:52 PM »
I'm planning to use it for slow motion while shooting certain sport events and/or workouts. Not aiming to be like Riefenstahl (it is impossible), but I have several ideas and hope that ML would help me.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML 1.1.3) + SanDisk Extreme Pro 128 GB (CF).