Author Topic: Canon 40D (Read 463477 times)

pixelk · « **Reply #325 on:** November 18, 2013, 08:00:01 PM »

Yes sorry, I didn't try to capture, maybe it didn't work, maybe it did. But without the CF card recognised, my only urge was a full reset

imme · « **Reply #326 on:** December 03, 2013, 01:53:56 PM »

hi,

rufustfirefly is there any update on 40d ML version you are working

?

imme · « **Reply #327 on:** December 23, 2013, 11:30:00 AM »

jplxpto & rufustfirefly any latest update on 40d port? have not heard from you guys for a long time.

frix23 · « **Reply #328 on:** January 11, 2014, 08:21:04 PM »

...and here's another guy willing to contribute work that
might even brick his camera for the sake of getting a
running 40d port. So, if there's anything I could
possibly do, let me know!

AOK · « **Reply #329 on:** February 06, 2014, 08:15:59 PM »

Hi everyone,

What is the current status? Do we have a forked development of the 40D ML or rufustfirefly progressing on his own? I am very confused.

Guys whatever the case is thank you so much! Let us hope for the best.

I've just installed his build - and it has a few features... Now I know we are talking about quite an old body. Indeed since 2007 way too many things have developed. And yet could some more features
be expected?

imme · « **Reply #330 on:** February 28, 2014, 01:27:32 PM »

Can you please tell me what features are supported in this firmware. I just need HDR and timelapse feature. is it there?

Canon40D · « **Reply #331 on:** March 31, 2014, 05:18:59 AM »

Anyone have an update on ML for the 40D? I've read this thread start to finish and looked all over without a clear answer. The ML website claims it's compatible with the 40D but I can't get it to work. Any help or guidance is much appreciated thanks to all for the hard work and time given to make this possible.

Marsu42 · « **Reply #332 on:** March 31, 2014, 11:37:32 AM »

Quote from: Canon40D on March 31, 2014, 05:18:59 AM

Anyone have an update on ML for the 40D? I've read this thread start to finish and looked all over without a clear answer. The ML website claims it's compatible with the 40D but I can't get it to work. Any help or guidance is much appreciated thanks to all for the hard work and time given to make this possible.

I also thought so and even told other people as such, but then I was told here that 40d is not working at all and this most likely won't change $:-\$ ... it's not even digic4 so copy/pasting code most likely won't work.

Canon40D · « **Reply #333 on:** March 31, 2014, 08:08:53 PM »

Quote from: Marsu42 on March 31, 2014, 11:37:32 AM

I also thought so and even told other people as such, but then I was told here that 40d is not working at all and this most likely won't change $:-\$ ... it's not even digic4 so copy/pasting code most likely won't work.

I'll just stick to my T2i for now, though I love the feel of my 40D over my T2i which is why I would love to get ML working on it.

rufustfirefly · « **Reply #334 on:** April 02, 2014, 05:49:10 PM »

If anyone's still watching this, here's where I'm at:

I had tried, relatively unsuccessfully, to port the existing VxWorks ports to the 40D. I'm going back to the 1000d_dev work, and pushing out my current work, etc, to github. If anyone would like to assist, it's here:

https://github.com/jbuchbinder/40d_dev

Thanks!

sedayu · « **Reply #335 on:** April 03, 2014, 05:53:49 PM »

Quote from: rufustfirefly on April 02, 2014, 05:49:10 PM

If anyone's still watching this, here's where I'm at:

I had tried, relatively unsuccessfully, to port the existing VxWorks ports to the 40D. I'm going back to the 1000d_dev work, and pushing out my current work, etc, to github. If anyone would like to assist, it's here:

https://github.com/jbuchbinder/40d_dev

Thanks!

wow, god job bro

NurseBob · « **Reply #336 on:** April 04, 2014, 11:51:18 PM »

Quote from: rufustfirefly on April 02, 2014, 05:49:10 PM

If anyone's still watching this, here's where I'm at:

I had tried, relatively unsuccessfully, to port the existing VxWorks ports to the 40D. I'm going back to the 1000d_dev work, and pushing out my current work, etc, to github. If anyone would like to assist, it's here:

https://github.com/jbuchbinder/40d_dev

Thanks!

Just joined, and have a 40D. Noted that 40D is listed on the home page as "supported" but based on what I'm seeing, that's perhaps a bit misleading...
However, I do have code experience with the msp430 microcontrollers, and from what I'm seeing, there would be a learning curve with the controller for the 40D, but hopefully not insurmountable. I guess time will tell.
Aside from this extensive thread, are there any other resources regarding design of the app??? Or is it just "read the code?"
Thanks!

bob

chris_overseas · « **Reply #337 on:** April 05, 2014, 01:29:49 AM »

Quote from: NurseBob on April 04, 2014, 11:51:18 PM

Aside from this extensive thread, are there any other resources regarding design of the app??? Or is it just "read the code?"

I've found it to be a bit sprawling, but there is a lot of information buried on the wiki http://magiclantern.wikia.com/wiki/Magic_Lantern_Firmware_Wiki

NurseBob · « **Reply #338 on:** April 05, 2014, 07:12:53 AM »

chris_overseas
Thanks! Looks like a great starting point, and a whole lot of homework... So it goes.

bob

Faxe · « **Reply #339 on:** April 09, 2014, 11:34:05 AM »

> Thanks! Looks like a great starting point, and a whole lot of homework... So it goes.

For what it is worth, we are several people who still follow this thread closely! We wish you good luck, should you except the challenge.

imme · « **Reply #340 on:** April 12, 2014, 09:36:35 AM »

I am following and waiting for this port for long time

Today I thought I must remove 40d ML updates from my RSS feeds. But NurseBob I hope you can make it a reality for lot of Magic lantern users.

I am not a developer but this whole 40d thread contains lots of information sharing by some developers and Magic lantern team lead.

Goodluck

tonesen · « **Reply #341 on:** April 23, 2014, 12:44:55 PM »

i just want to say that i would be so freakin' happy if you could make it possible to use a 40d as a video camera.
thank you very much for all the work here!

Canon40D · « **Reply #342 on:** April 24, 2014, 02:17:24 AM »

Quote from: tonesen on April 23, 2014, 12:44:55 PM

i just want to say that i would be so freakin' happy if you could make it possible to use a 40d as a video camera.
thank you very much for all the work here!

I've seen some videos on YouTube that show video recording on a 40D already. I'm going to google it now.

dazzle · « **Reply #343 on:** April 24, 2014, 05:31:05 PM »

hi

im donating some micro bitcoins to someone who can finally make the 40d capture video at, preferably, 24fps with 720p resolution, ideally

who's with me? ive got a 40d lying around here, clean and dust free.. by the way, good job on that rufustfirefly!

Faxe · « **Reply #344 on:** April 25, 2014, 01:44:38 PM »

Quote from: Canon40D on April 24, 2014, 02:17:24 AM

I've seen some videos on YouTube that show video recording on a 40D already. I'm going to google it now.

It is possible to shoot video today, but through a connected computer.

See http://sourceforge.net/projects/eos-movrec/

ansius · « **Reply #345 on:** April 30, 2014, 09:10:28 PM »

First - thanks to those who have contributed to ML, it is an awesome tool.

I have 7D with it running, but my 40D seams to be collecting dust, because some of the tasks I would use it for would benefit form ML. like built in intervalometer, bulb timer, bulb ramping or even better - automatic ettr with deflicker. I wish i could help, even tough I have written some code in in various languages, including even low level assambler for atmel avr micro controllers, newer got a good grasp of C, somewhat it always have made me lose interest in it. now I bite my fingers, should have learned it.

I really hope that some day, before the 40D dies we would see ML in it. IMHO video functions, even tough cool, are not for the humble 40D, there are cameras much better for this. Photography would benefit greatly form ML tough.

bubbleg5 · « **Reply #346 on:** May 07, 2014, 04:29:09 PM »

Hello friends!
I did not understand where I can download the modified firmware for my Canon 40D ... can you help?

dazzle · « **Reply #347 on:** May 09, 2014, 04:59:35 PM »

it is still in development.

techbp · « **Reply #348 on:** May 14, 2014, 05:12:59 AM »

Any updates? Also waiting for this firmware update... goodluck guys

dazzle · « **Reply #349 on:** June 01, 2014, 04:58:53 PM »

everyone is really anticipating this great hack/tool for a great camera 40D

I am waiting too!

News:

Author Topic: Canon 40D (Read 463477 times)