Canon 70D

Started by nikfreak, January 15, 2015, 12:22:15 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Walter Schulz

CBR doesn't apply to raw/MLV.
70D contains Digic 5 and audio settings are "limited". Very limited: https://wiki.magiclantern.fm/camera_help#audio
For high-res raw/MLV recording you can start with experimental crop_4k build. Top of page -> Downloads -> Downloads (drop-down menu) -> Experiments.

Dang, I always forget about 70D's limits! Thanks to TheBilalFakhouri for reminding me (again!): There is a custom build for 70D https://www.magiclantern.fm/forum/index.php?topic=25786.msg213074#msg213074
Updated download links: https://www.magiclantern.fm/forum/index.php?topic=25786.msg230726#msg230726
70D is a little bit odd because of dual-pixel AF.

Take a look into our ML Glossary, too.

EphimAO

70d / 2021 build / moza air 2 / rode videomic go

vicenzzopaiva

I'm buying the 70D now to be my primary camera alongside with the M for ML.
The latest build for the 70D is the one from mar/19?
What's working and what's not? I've read a lot of this thread and posted links but i didn't seem to be able to sum up the working bits.
EOS M - 2.0.2 - Danne's feb21 build
70D    - 1.1.2 - ArcziPL's mar19 build

ArcziPL

List of not working features of the "original" nigtly build:

https://www.magiclantern.fm/forum/index.php?topic=14309.0#post_notworking


My custom build has additionally added lossless compression of RAW video (thanks to a1ex help) and disabled FEATURE_ARROW_SHORTCUTS, which was buggy:
https://www.magiclantern.fm/forum/index.php?topic=25786.0

And some days later FPS override was activated (thanks to findings of David_Hugh) which is having a small glitch but is usable
https://www.magiclantern.fm/forum/index.php?topic=25786.msg213467#msg213467

There are no crop_rec presets available. It's doable but no time here.
M50.110 [main cam] | G7X III [pocket cam] | 70D.112 [gathers dust] | M.202 [gathers dust] | waiting for M5II

vicenzzopaiva

Nice, thank you!
Working ok here. I missed the "press SET to" load/skip ML on startup feature, is this anything easy to implement?
EOS M - 2.0.2 - Danne's feb21 build
70D    - 1.1.2 - ArcziPL's mar19 build

EphimAO

Hello! I have question about crop mode. I can't turn it on. It just has got "YARES" function. I know about 5x zoom but it is still luggy
70d / 2021 build / moza air 2 / rode videomic go

Walter Schulz

I suppose you're not a native english speaker. I'm none either. Your translation tool doesn't work well or you are using slang unfamiliar to me: YARES and luggy.

Suggestions:
- Try to use https:/deepl.com instead. It almost everytime works better than google translator.
- and add your issue using your native language.

If everything fails: Make a short video showing your issue.

EphimAO

Hi again. I wanted to say that the zoom crop is buggy. In the crop mod section (crop_rec.mo) I see the target, yres, delta, cmos parameters and others. Is there a guide on how to enable the crop module ?
70d / 2021 build / moza air 2 / rode videomic go

Walter Schulz

Press zoom/magnify/loupe button to enter crop mode.

EphimAO

70d / 2021 build / moza air 2 / rode videomic go

Walter Schulz

You will find build info in Help tab/screen on the bottom. Please share this one.

EphimAO

70d / 2021 build / moza air 2 / rode videomic go

Walter Schulz

Slight misunderstanding: I need the info from the screen itself. Don't have QEMU running here.

EphimAO


do I need to send a photo of the build?
70d / 2021 build / moza air 2 / rode videomic go

EphimAO

70d / 2021 build / moza air 2 / rode videomic go

theBilalFakhouri

Quote from: EphimAO on February 18, 2021, 06:57:04 PM
Thx for help. Also i have a question about this menu: https://drive.google.com/file/d/1-qKuquwQMUoIKEtniryx2VON_TLNPeuN/view?usp=sharing

This menu has no effect on 70D, it's related to custom high resolutions which are not presented in 70D, this menu made originally for 5D3 users to push a custom resolution further or fine-tune it:

Quote from: a1ex on April 01, 2017, 11:15:41 AM
..
* Full-width LiveView - decrease vertical resolution in the crop_rec submenu, all the way to 5796x400 @ 48 fps :)
..
* Since these settings were pushed to limit, the risk of corrupted frames is high. If it happens, decrease the vertical resolution a bit (from the crop_rec submenu).
..

May I fine-tune the new modes?

Yes! I've included some of the knobs on the user interface. Normally you shouldn't need to touch these buttons, but if you do, you might be able to squeeze a few more pixels.
..

So for now, just ignore it.

EphimAO

70d / 2021 build / moza air 2 / rode videomic go

janjan

Hi,
Are the nightly builds still updated? the last one if from 2018.
Is there a newer version.

Thanks,


Walter Schulz

Top of page -> Downloads -> Downloads (drop down menu) -> Experiments
and
https://www.magiclantern.fm/forum/index.php?board=66.0

janjan

Thanks
Found it and I realized that stack focus is now working.
Has this been implemented a while ago?
Last time I checked , which was quite some time ago, it wasn't.

a1ex

I've enabled it 3 years ago.

To date, I haven't received any confirmation on whether it works or not, except for your message. Mind providing some more details? I don't own this camera, and QEMU doesn't emulate this functionality, so I cannot check it myself.

janjan

I'll make some more thorough test in the following days and report back...
I only checked it briefly today with the latest experimental build and it was working.

janjan

Quote from: a1ex on February 27, 2021, 09:43:55 PM
I've enabled it 3 years ago.

To date, I haven't received any confirmation on whether it works or not, except for your message. Mind providing some more details? I don't own this camera, and QEMU doesn't emulate this functionality, so I cannot check it myself.

I've checked it and it appear to work as expected.
I defined the start end/point using the built in option.
Set the required steps behind and in front it was taking image and moving the focus as expected.



hdslr

Hello everyone ( sorry I don't speak English I translated for Deepl)
I have a 70D and haven't used the Magic Lanter for about 5 years. Installed today and I was lost lolll
1 - I would like to know if it is already possible to have a completely clean HDMI output, without any black bars to use on a Blackmagic atem mini table.
2- I don't like the original soft image from canon. The RAW image has much more detail than sony alpha. I would like to know if it is already possible to record full hd or near full hd continuous raw. I saw that it has 10/12/14 bit but stopped at maximum 20 seconds even using U3 card.
3 - Is there any recording without sesr RAW that has more detail in the image compared to the original?
4 - Which firmware should I use?


Walter Schulz

1: No. 1680x1080, 60 fps interlaced.
2: U3 is a pretty useless designation. 30 MByte/s isn't sufficient to reach cam's vanilla SD-card interface limit without overclocking: Around 43 MByte/s read, 40-ish write. Something like Sandisk Extreme Pro in the 170/160 MByte/s (as labeled) has given most consistent results with and without overclocking.
3: Nothing to write home about.
4: If you want to go after highest resolution in raw/MLV recording:https://www.magiclantern.fm/forum/index.php?topic=25786.msg234507#msg234507
Read first post (at least) of this thread.