Author Topic: Canon 70D (Read 2165199 times)

nikfreak · « **Reply #2700 on:** October 24, 2016, 10:37:23 PM »

The test build from #2674 for 1.1.2 doesn't include ettr.mo.
So you just using the one from 1.1.1 being still located on your sdcard.

Going to update the first post these days then....

camslide · « **Reply #2701 on:** October 25, 2016, 10:22:48 AM »

Yes, I was using the one from 1.1.1. I didn't use it actively, just activated the module.

khrisvincent · « **Reply #2702 on:** October 25, 2016, 11:54:12 PM »

I have a firmware version 1.1.2 and installed ML. the question is, whenever I use FRSP + Intervalometer, my screen just goes black. but it's working. I have seen some videos on youtube and theirs still shows live mode while intervalometer is running. Do I have to change settings so that Live View mode will still be on the screen while using FRSP + Intervalometer?

nikfreak · « **Reply #2703 on:** October 26, 2016, 11:06:52 AM »

Recompiled and linked the new build based upon firmware 1.1.2 and updated first post. Dropping hereby support for all previous releases based upon 1.1.1 (be it A or B revision).

Cadkey · « **Reply #2704 on:** October 26, 2016, 05:19:26 PM »

ML Beta 4a, message"Raw error, falling back to YUV overlays"
No problem with old ML version.
How to solve this problem please?

nikfreak · « **Reply #2705 on:** October 26, 2016, 06:36:18 PM »

Not a problem at all as it always existed. You probably just discovered it for the first time.
You probably played too much with the "Zebras" option in ML menu. For the time being I recommend turning off "use RAW zebras". Another option would be to disable quick review or just use LumaFast or a combination of all mentioned...

Btw the "not working" section in 1st post contains a hint regarding raw zebras. And that hint has been there for a long time now...

Cadkey · « **Reply #2706 on:** October 27, 2016, 06:18:19 PM »

I've never had this problem in Beta 3c, I have not changed my options since.
I have not "use RAW zebras" in "Zebras" option.
I have "Color Space", "Underexposure", "Overexposure" and "When recording"
And in "Color Space" there are" Luma "," RGB "," Luma Fast "

Tested with "Zebras" Off and same error "error Raw, falling back to YUV overlays"

Edit: Restore ML defaults and Restart, same error
Delete SETTING folder on SDCard, always same error.

nikfreak · « **Reply #2707 on:** October 27, 2016, 07:01:23 PM »

You sure that you also didn't change any "Quick Review" settings?

either in canon Original menu
if above is not the case then in ML menu "image Review" set that to "CanonMnu:Hold->Play" [set Canon menu to Hold too]

Cadkey · « **Reply #2708 on:** October 27, 2016, 07:16:02 PM »

It worked in Beta 3c, I never touched this tuning for a long time. I'm sure and certain.
Now impossible to use the Beta 4a with an "image review" option other than "Hold"
with or without Zebras, impossible to use image review.
Before, all image review option worked, Always use image review on 4 seconds with ML
Even without Zebra, "Image review" function is degraded with ML.

No solution to use full option in "Image review in Beta Beta 4a like beta 3c and previous version?

nikfreak · « **Reply #2709 on:** October 27, 2016, 07:41:35 PM »

I need to make a diff between the old 1.1.1 branch and the new 1.1.2. Maybe I missed something while doing the update to 1.1.2 but the message always was there from the beginning of 70D porting. Maybe I just was hiding the message for thepeople not being confused.
Don't feel stressed for the moment. I would describe it as a fallback message not really suited for everyone's eye. You can use the "canonMnu:Hold" trick for the moment.

Check the source comments please:
https://bitbucket.org/hudson/magic-lantern/src/15fce5b49b23baeba38c9dd49e5f2822aaa85400/src/raw.c?at=unified&fileviewer=file-view-default#raw.c-1957

For the moment ignore it...

Cadkey · « **Reply #2710 on:** October 27, 2016, 07:46:47 PM »

Ok. indeed, the message appears. but it does not seem that there is a problem or a real error in my case.
In my configuration used, I never had this message displayed in Beta 3c.
Thanks for your help.

nikfreak · « **Reply #2711 on:** October 27, 2016, 07:53:21 PM »

for more infos regarding that problem check the Pull request on bitbucet for the older 1.1.1 revisions. I've posted screenshots over there how it will look even if you enable "use raw zebras". Check it out:

https://bitbucket.org/hudson/magic-lantern/src/15fce5b49b23baeba38c9dd49e5f2822aaa85400/src/raw.c?at=unified&fileviewer=file-view-default#raw.c-1957

Cadkey · « **Reply #2712 on:** October 27, 2016, 08:09:21 PM »

Yes I understand. in 1.1.1, there was this problem with "use raw zebras", it's ok.
In 1.1.2 the problem widened. Probably like you said, the message may not be in the right place in 1.1.2
The display of the error message is not a problem in my case. I can ignore it.

nk87 · « **Reply #2713 on:** November 01, 2016, 09:52:17 AM »

Hello. Please fix focus box in magic zoom. I can't move it. This focus box stay only in one position on the screen. It was the same problem as in some alpha builds

khwaja · « **Reply #2714 on:** November 01, 2016, 04:57:26 PM »

I am going to try install. Can I use EC with M model like in latest cameras (80D, M3 and 5d4).

Thanks

farrellts · « **Reply #2715 on:** November 02, 2016, 01:41:47 PM »

Please feel free to yell at me. I'm extremely technical in terms of computer hardware & software development but have not had my 70D awfully long (early 2016), and it will take me a while to read what appears to be 109 pages of prior posts from EOS 70D Magic Lantern users. I have installed EOS 1.1.2 firmware update, then Magic Lantern (October 2016 download), which is functioning well on camera. Perhaps somebody can just share whether what follows is unique to me:

Sure, a few occasional crashes when using camera in the field but no big deal to reboot as needed. However, I'm finding it problematic now to connect to PC via USB cable and download image/video files -- causes Magic Lantern to crash, no idea why. This is the case, whether cable is connected prior to power-on or after.

So I figured I'd do a temporary boot without Magic Lantern and see if I could then make the USB/PC connection. However, holding down "Set" while powering up camera does NOT seem to stop Magic Lantern from loading per the instructions for doing so. (And, yes, I hold "Set" down before power on and then while watching Magic Lantern load anyhow.)

Looks like, for now anyhow, I will have to either pop my EOS 70D's SD card directly into my laptop to get access to photos/videos. Or else via my Android device, either using USB OTG connection or DSLR Controller/Gallery apps.

Nevertheless, it will eventually be necessary to connect to laptop via USB.

Thanks, and again, please feel free to yell at me.

lojzik · « **Reply #2716 on:** November 02, 2016, 03:29:19 PM »

I have problem with silent pictures
- simple - hlf-shutter - dng taken
- full-res - hlf-shutter - nothing

DeafEyeJedi · « **Reply #2717 on:** November 02, 2016, 05:16:55 PM »

@farrellts -- no need to yell at you. Just please continue with using the SD slot reader in your laptop OR get a decent card reader (preferably USB 3.0 and supports UDMA 0-7) as I like this one that has served me well over the past year or so.

http://www.cameramemoryspeed.com/reviews/card-readers/kingston-memory-card-reader-fcr-hs4/

@lojzik -- have you tried resetting ML back to default and run FRSP again? Are you using DNG or MLV to spit out the FRSP files?

a1ex · « **Reply #2718 on:** November 02, 2016, 05:26:08 PM »

How does the crash look like?

There is a similar problem on 5D2, but I had no way to reproduce it consistently. After the crash, repeating the copy process works fine...

OlRivrRat · « **Reply #2719 on:** November 02, 2016, 06:44:45 PM »

      @Farrellts

   It has been mentioned, in the not too distant past, that having the "lua.mo" Active May cause some

70D+M'L' Operational Issues. So Disable it if You have it Active & Try Again.

   I found that the Set Button on My 70D had to be Pressed "Just Right" during StartUp to Prevent M'L'

Launch. The Following is from a Post I did back in Apr'15 ~

   SetButtonStart Issue Solved ~ Turned out to be a Firm-Awareness quirk ~ If I Depress & Hold the SetButton with the Meat

of my thumb, which is how I normally Press It, ML would still be active. If I Depress & Hold the SetButton with my ThumbNail the

Cam' Starts up with ML Inactive. My apologies to all who Wasted Time on solving MyProb'.

                                 ORR ~ DeanB

lojzik · « **Reply #2720 on:** November 02, 2016, 08:32:04 PM »

Quote from: DeafEyeJedi on November 02, 2016, 05:16:55 PM

@lojzik -- have you tried resetting ML back to default and run FRSP again? Are you using DNG or MLV to spit out the FRSP files?

reset ML
enable silenpicture
fullress + dng -> nothing
simple + dng -> log on display + saved dng
fullress + mlv -> nothing
simple + mlv -> mlv module error
enable mlv&raw modules
fullress + mlv -> nothing
simple + mlv -> log on display + saved mlv

DeafEyeJedi · « **Reply #2721 on:** November 03, 2016, 04:24:24 AM »

Do you realized that FRSP only works while in LiveView?

lojzik · « **Reply #2722 on:** November 03, 2016, 06:28:28 AM »

My research:
1. Av+simple silentpictures -> saved
2. Av+FRSP -> nothing
3. Av+FRSP+intervalometer -> Manual (M) is required
3. M (auto iso)+ FRSP -> manual exposure is required
4. M + FRSP -> saved

It was my first using of FRSP and I don't know about manual exposure. It would be nice to write to menu, that FRSP requires manual exposure (here is only info about LV) and variant 2 lacks relevant error message.

a1ex · « **Reply #2723 on:** November 03, 2016, 07:58:01 AM »

Menu warning works fine here (60D).

nikfreak · « **Reply #2724 on:** November 03, 2016, 07:58:30 AM »

There's definitely a hint for your problem within silent.mo while browsing through ML menu. Check again yourself on the camera:

Quote

Full-res pictures only work in Manual (M) photo mode.

Feel free to suggest a better suited text within FRSP's thread over here:
http://www.magiclantern.fm/forum/index.php?topic=12523.0

News:

Author Topic: Canon 70D (Read 2165199 times)