Author Topic: Canon 70D (Read 2283094 times)

nikfreak · « **Reply #2250 on:** January 25, 2016, 06:35:47 PM »

@camslide: I will look into it at a later time. Seen this bug report now 2nd time.

camslide · « **Reply #2251 on:** January 25, 2016, 07:24:46 PM »

Quote from: nikfreak on January 25, 2016, 06:35:47 PM

@camslide: I will look into it at a later time. Seen this bug report now 2nd time.

Thanks!

prsla · « **Reply #2252 on:** January 27, 2016, 02:41:52 PM »

Hello, I install ml on my 70d and after some days i was freezing and show me error 70. I change the card and format, then i make some 100 photos, camera freeze and won't turn on. Light near card don't work, camera won't turn on.
What to do?
Thanks

aedipuss · « **Reply #2253 on:** January 27, 2016, 03:57:40 PM »

prsla - have you tried a different battery?

prsla · « **Reply #2254 on:** January 27, 2016, 05:00:18 PM »

Yes, i have 3 batteries , also on Canon 6d all works without problem

camslide · « **Reply #2255 on:** January 27, 2016, 09:01:14 PM »

FYI: Todays Lightroom update solved the DNG issue.

aedipuss · « **Reply #2256 on:** January 27, 2016, 10:26:16 PM »

psrla - try it with a fresh battery and no card/door closed. does it boot? then battery and a known good card formatted outside the camera.

prsla · « **Reply #2257 on:** January 28, 2016, 03:18:46 AM »

No, its not boot. light near sd card don't flashes

aedipuss · « **Reply #2258 on:** January 28, 2016, 03:42:31 AM »

prsla - take the card out of the camera and close the slot door. open the lcd screen so you can see it. turn on the camera and it should say no card and boot.

prsla · « **Reply #2259 on:** January 28, 2016, 06:52:21 AM »

Nothing happen, i try that :/

aedipuss · « **Reply #2260 on:** January 28, 2016, 08:47:23 PM »

contact canon. it might be the problem some others have reported with 70d models. there is a battery connector inside that can break.

jprovidenza · « **Reply #2261 on:** January 29, 2016, 03:37:54 AM »

I'm new to the forum and ML, so excuse me if this is not specific enough. I've downloaded the latest version
to experiment with ETTR and I notice that in general,...

the 'set' button is extremely sensitive, almost glitchy. It's as if it needs debounced.

This is not specific to ETTR, it applies to all menu items I've been trying.

The normal Canon menu items do not show this.

Thanks for the amazing software!

John P

passegua · « **Reply #2262 on:** January 29, 2016, 12:33:55 PM »

I need monitoring audio when recording video, I don't find any tutorial about this feature.

Is it possible monitoring audio while recording with EOD 70D? How?

Many thanks.

Walter Schulz · « **Reply #2263 on:** January 29, 2016, 12:42:35 PM »

http://magiclantern.fm/forum/index.php?topic=14309.msg159687;topicseen#msg159687

passegua · « **Reply #2264 on:** January 29, 2016, 02:37:52 PM »

Thanks, so I understand there is no way to monitor audio while recording on 70D?

Btw I installed ML on my 1.1.1A and all seems work properly but the ML screen stays on for only about 10 seconds then it shut off and the canon menu display comes up.

Then I have to push the trash can button again in order to view ML display again.

Walter Schulz · « **Reply #2265 on:** January 29, 2016, 03:20:18 PM »

http://magiclantern.fm/forum/index.php?topic=14309.0#post_notworking

Jjayradd · « **Reply #2266 on:** January 30, 2016, 12:42:10 PM »

After clicking the "don't click me" button my 70d is bricked. I use taken the battery out but it still won't turn on.

Please help someone!!

Walter Schulz · « **Reply #2267 on:** January 30, 2016, 12:55:32 PM »

Load battery, remove card, insert battery. Startup cam. Results?

Jjayradd · « **Reply #2268 on:** January 30, 2016, 01:06:59 PM »

It turns on without the sd card

Walter Schulz · « **Reply #2269 on:** January 30, 2016, 01:11:57 PM »

Delete autoexec.bin, ML directory and *.FIR from card and copy extracted latest build contents over. Then run firmware upgrade and your issue is fixed.

prsla · « **Reply #2270 on:** January 31, 2016, 03:08:58 AM »

I try now that, camera doesn't start. Led near SD not flashes, display not working
Other solutions?

Walter Schulz · « **Reply #2271 on:** January 31, 2016, 07:23:18 AM »

EDIT: Post was directed to Jjayradd and advice was not intended to be used by you

ShootMeAlready · « **Reply #2272 on:** January 31, 2016, 04:59:14 PM »

Audio should monitor using the stereo bars (red/green peaks) when recording for unexpected spikes
or drop outs.
If you do a proper sound check & balance your mics that's
all that is needed to handle max. volume and min. noise.
You could add compressor/limiters in the live recording if spiking was really an unknowable factor.

As the live recording happens at the same time as the recording,
one person can not differentiate just by listening. There is very little to be gained (pun intended)
by having live audio headphone monitoring during recording.
However as I recall on playback you can hear the sound and I think review the bars.
Only on playback can you sound check.

OlRivrRat · « **Reply #2273 on:** January 31, 2016, 05:31:08 PM »

@Walter Schulz

Maybe You Should take the trouble to Identify to Whom You are Replying.

ORR ~ DeanB

swardet · « **Reply #2274 on:** February 04, 2016, 02:27:50 PM »

@nikfreak
I installed yesterday for first time and a llllooonnngggg time technology aficionado.

I installed the 111A, as the B version wasn't compatible.

Two issues which caused me to uninstall.
First. While recording RAW video, the display AND footage surged from a normal exposure to a VERY overexposed. This seemed quite odd.
Second. The AF+Tracking that I find extraordinarily useful did not work well while using ML. The camera was like a cheap Rebel and all it did was hunt for the subject.

If you have a fix for these two problems, please let me know and I'd be happy to try again.

btw, i have the two ROM0/1.BIN files from when installing. Looked for how to attach to this message and couldn't find attachment option. Let me know if these would be valuable and I'll get ''em to you somehow.

News:

Author Topic: Canon 70D (Read 2283094 times)

swardet