Canon 70D

Started by nikfreak, January 15, 2015, 12:22:15 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Walter Schulz

Quote from: lubo on November 30, 2015, 05:56:25 PMcopied only the MM config files from 2611 from the backup ...

You mean you copied ML\Settings\ from backup to card? Then delete all contents in ML\Settings and retry. Do you have crashes after that? Report back, please.

OlRivrRat

                     @Lubo

           Is your 70D using M'L' 111A or 111B ?
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

aedipuss

going to test installing 29nov "A" using a freshly low level formatted card, first from comp then again formatted in camera.  it will take a bit, low level formatting is slow...................................
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

Walter Schulz


aedipuss

ok, not sure what was wrong yesterday but 29nov "A" will install firmware on card no matter how card is formatted today. 

but each time, all it takes is moving the switch to movie mode and it crashes.

latest error logs

ASSERT: 0
at ./Memory/Memory.c:575, AeWb:3db28
lv:1 mode:3


Magic Lantern version : Nightly.2015Nov29.70D111A
Mercurial changeset   : 0a981f3d2abf+ (70D-merge-dryos-hooks) tip
Built on 2015-11-29 11:22:59 UTC by ml@ml-pc.
Free Memory  : 238K + 2466K


Mon Nov 30 14:03:46 2015
      0:    48.278 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.300 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.823 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.477 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.299 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.320 [STARTUP] startupEntry
      6:   105.405 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.574 [STARTUP] startupPropAdminMain : End
      8:   105.675 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   146.635 [SEQ] seqEventDispatch (Startup, 1)
     10:   146.673 [STARTUP] startupPrepareProperty
     11:   150.378 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   151.766 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   152.013 [RTC] RTC_Permit 0x20
     14:   152.672 [SND] Seq LPC fin
     15:   153.100 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   154.085 [RSC] MemoryStatusMasterResultCBR
     17:   183.004 [FM] FM_RegisterSpaceNotifyCallback
     18:   183.046 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   183.096 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   183.158 [FM] FM_RegisterSpaceNotifyCallback
     21:   183.462 [JOB] InitializeJobClass (ID = 1964, Num = 13)
     22:   192.703 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   194.876 [JOB] InitializeInnerDevelopJobClass (ID = 1964, Num = 16)
     24:   194.911 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   194.933 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   194.954 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   194.974 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   194.996 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   195.020 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   195.131 [TERMINATE] SHUTDOWN init comp
     31:   195.187 [TERMINATE] Abort init comp
     32:   202.715 [FM] fmPrepare : Completed
     33:   202.857 [SEQ] seqEventDispatch (Startup, 2)
     34:   203.238 [SHTRD] [MNAV]Init
     35:   203.448 [SHTRD] [MNAV]SetMMap:1
     36:   206.585 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     37:   251.970 [SEQ] seqEventDispatch (Startup, 3)
     38:   253.855 [MC] PROP_GUI_STATE 0
     39:   254.936 [MC] PROP_VARIANGLE_GUICTRL : Enable
     40:   254.997 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     41:   255.142 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     42:   255.290 [MC] PROP_LCD_OFFON_BUTTON : 2
     43:   256.219 [MC] regist master CardCover
     44:   258.791 [PRP] M:B1 F:0 L:0 P:32 T:8
     45:   258.962 [STARTUP] update coded version.
     46:   259.032 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     47:   260.477 [STARTUP] Set_AVS 60
     48:   263.495 [STARTUP] startupPrepareDevelop
     49:   266.887 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     50:   267.584 [PROPAD] SerialFlash Packages!! 0x490000
     51:   301.699 [PROPAD] SerialFlash Packages!! 0x7
     52:   303.111 [MAC] MAC_Initialize
     53:   303.452 [MAC] K_BOARDID4
     54:   303.485 [MAC] K_BOARDID3
     55:   303.519 [MAC] K_BOARDID2
     56:   303.548 [MAC] K_BOARDID1
     57:   303.718 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     58:   313.507 [SHTP] RegRPCHandler Master
     59:   339.493 [MR] TimeCode Mode:1
     60:   339.596 [MR] TimeCode DropFrame Mode:1
     61:   339.641 [MR] PROP_MOVIE_PARAM:0
     62:   345.101 [HPC] ReserveHPCopyChannel (1, 116)
     63:   357.226 [MR] encdrwrapHPCopyAsyncCBR
     64:   360.161 [LVDTS] WARN First Get DTS_GetAllRandomData
     65:   382.218 [STARTUP] startupPrepareRemote
     66:   383.067 [AUDIO] RegisterCBRSDIOCableConnect
     67:   384.944 [COM] PackHeap 79491c,79491c,0
     68:   385.330 [COM] Local Heap warning hCom[0]size[262144]
     69:   395.047 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     70:   395.843 [WFT] InitializeAdapterControl END
     71:   404.521 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     72:   404.573 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     73:   404.860 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     74:   404.902 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     75:   406.648 [PTPCOM] SetPtpTransportResources:0,3253
     76:   421.459 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     77:   759.957 [SD] sdSendOCR: CCS=1, S18A=1
     78:   760.063 [SD] Set 1.8V Signaling
     79:   793.456 [SD] sdSendCommand: CMD2 Retry=2(SDSTS_ED)
     80:   796.643 [SD] CARD CAPACITY is 61087Mbyte( 125106176Sec )
     81:   809.046 [SD] SD_GetAccessMode=7
     82:   809.059 [SD] Set Hi-Speed Mode( 96MHz )
     83:   821.381 [FSU] fsuGetPart: Block(32768, 125073408, 125106176)
     84:   875.350 [FM] FileNo (DriveNo = 2, 0 <-> 1977)
     85:   875.399 [FM] FreeCluster (DriveNo = 2, 488111 <-> 488367)
     86:   876.501 [FC] _FC_OpenCatalog : wNumOfDir 1
     87:   889.339 [FM] [GPS] GPS_Initialize (36, 25)
     88:   889.896 [MRK] MRK_Initialize
     89:   890.167 [MRK] mrkSetLockSemaphore
     90:   890.534 [MRK] MRK_PrepareMrkFileObject
     91:   893.621 [SEQ] seqEventDispatch (Startup, 4)
     92:   893.805 [DP] DP_Initialize()
     93:   894.478 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     94:   894.510 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     95:   894.600 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     96:   894.993 [DP] PROP_CONNECT_TARGET [0x00000000]
     97:   895.028 [DP] DpConnectionTarget [0x00000000]
     98:   895.078 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     99:   895.104 [DP] DpConnectionTarget [0x00000000]
    100:   895.157 [DP] LOGICAL_CONNECT [0x00000000]
    101:   895.188 [DP] DpsTerminate()
    102:   895.274 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    103:   895.300 [DP] RD_Cancel No Issue
    104:   895.329 [DP] DpPhysicalConnectFlg [0x00000000]
    105:   895.379 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    106:   895.394 [DP] RD_Cancel No Issue
    107:   895.420 [DP] DpPhysicalConnectFlg [0x00000000]
    108:   895.458 [DP] PROP_NETWORK_SYSTEM [0]
    109:   895.482 [DP] PROP_WIFI_SETTING [0]
    110:   895.740 [DP] [GYO]DpFunctionList[0x10117fff]
    111:   895.857 [DP] X FreeMem Address[0x00000000]
    112:   896.175 [INDEV] INDEV_Initialize
    113:   900.713 [HDMI] DisconnectHDMI : Not Connected
    114:   911.484 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    115:   911.563 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    116:   940.645 [DP] DP_RegisterCBR() Id=1 Count:12
    117:   940.684 [DP] DP_RegisterCBR() Id=2 Count:12
    118:   940.705 [DP] DP_RegisterCBR() Id=4 Count:12
    119:   940.824 [MR] tcmClockEnd
    120:   941.476 [DISP] SetBacklightBrightness called
    121:   952.413 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    122:   965.480 [MR] PROP_MOVIE_PARAM:0
    123:   967.848 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    124:   970.100 [MR] PROP_MOVIE_PARAM:0
    125:   973.246 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    126:   975.135 [CEC]CEC OFF
    127:   977.412 [SEQ] seqEventDispatch (Startup, 5)
    128:   977.437 [STARTUP] startupInitializeComplete
    129:   977.532 [MC] cam event guimode comp. 0
    130:   978.368 [MC] cam event guimode comp. 0
    131:   979.802 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    132:   979.838 [DL] PROP_DL_ACTION (1)
    133:   986.080 [FA] ChangeCBR(ID=0x8003000a)
    134:   986.767 [FA] RequestFromCheckData
    135:   986.991 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    136:   988.072 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    137:   988.285 [DL] PROP_DL_ACTION (0)
    138:   988.561 [DL] localCreateSerialIOChannelForDLIC
    139:   988.631 [DL] localCreateSerialIOChannelForDLIC
    140:   988.675 [DL] localCreateSerialIOChannelForDLIC
    141:   988.714 [DL] localCreateSerialIOChannelForDLIC
    142:   992.862 [DL] localCreateSerialIOChannelForDLIC
    143:   996.991 [DL]executeDL AD Start 69
    144:   997.103 [DL] localCreateSerialIOChannelForDLIC
    145:  1017.341 [TCH]Active_Mode SetEnd
    146:  1038.165 [TCH] [TCH]Variangle_State = 0
    147:  1043.928 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    148:  1046.987 [SEQ] seqEventDispatch (Startup) : End
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

Walter Schulz

aedipuss: Please edit all your posts here and wrap logs into "code" bbcode tags.

Works like this:



ASSERT: 0
at ./Memory/Memory.c:575, AeWb:3db28
lv:1 mode:3


Magic Lantern version : Nightly.2015Nov29.70D111A
Mercurial changeset   : 0a981f3d2abf+ (70D-merge-dryos-hooks) tip
Built on 2015-11-29 11:22:59 UTC by ml@ml-pc.
Free Memory  : 238K + 2466K


Mon Nov 30 14:03:46 2015
      0:    48.278 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.300 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.823 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.477 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.299 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.320 [STARTUP] startupEntry
      6:   105.405 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.574 [STARTUP] startupPropAdminMain : End
      8:   105.675 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   146.635 [SEQ] seqEventDispatch (Startup, 1)
     10:   146.673 [STARTUP] startupPrepareProperty
     11:   150.378 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   151.766 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   152.013 [RTC] RTC_Permit 0x20
     14:   152.672 [SND] Seq LPC fin
     15:   153.100 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   154.085 [RSC] MemoryStatusMasterResultCBR
     17:   183.004 [FM] FM_RegisterSpaceNotifyCallback
     18:   183.046 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   183.096 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   183.158 [FM] FM_RegisterSpaceNotifyCallback
     21:   183.462 [JOB] InitializeJobClass (ID = 1964, Num = 13)
     22:   192.703 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   194.876 [JOB] InitializeInnerDevelopJobClass (ID = 1964, Num = 16)
     24:   194.911 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   194.933 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   194.954 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   194.974 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   194.996 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   195.020 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   195.131 [TERMINATE] SHUTDOWN init comp
     31:   195.187 [TERMINATE] Abort init comp
     32:   202.715 [FM] fmPrepare : Completed
     33:   202.857 [SEQ] seqEventDispatch (Startup, 2)
     34:   203.238 [SHTRD] [MNAV]Init
     35:   203.448 [SHTRD] [MNAV]SetMMap:1
     36:   206.585 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     37:   251.970 [SEQ] seqEventDispatch (Startup, 3)
     38:   253.855 [MC] PROP_GUI_STATE 0
     39:   254.936 [MC] PROP_VARIANGLE_GUICTRL : Enable
     40:   254.997 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     41:   255.142 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     42:   255.290 [MC] PROP_LCD_OFFON_BUTTON : 2
     43:   256.219 [MC] regist master CardCover
     44:   258.791 [PRP] M:B1 F:0 L:0 P:32 T:8
     45:   258.962 [STARTUP] update coded version.
     46:   259.032 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     47:   260.477 [STARTUP] Set_AVS 60
     48:   263.495 [STARTUP] startupPrepareDevelop
     49:   266.887 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     50:   267.584 [PROPAD] SerialFlash Packages!! 0x490000
     51:   301.699 [PROPAD] SerialFlash Packages!! 0x7
     52:   303.111 [MAC] MAC_Initialize
     53:   303.452 [MAC] K_BOARDID4
     54:   303.485 [MAC] K_BOARDID3
     55:   303.519 [MAC] K_BOARDID2
     56:   303.548 [MAC] K_BOARDID1
     57:   303.718 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     58:   313.507 [SHTP] RegRPCHandler Master
     59:   339.493 [MR] TimeCode Mode:1
     60:   339.596 [MR] TimeCode DropFrame Mode:1
     61:   339.641 [MR] PROP_MOVIE_PARAM:0
     62:   345.101 [HPC] ReserveHPCopyChannel (1, 116)
     63:   357.226 [MR] encdrwrapHPCopyAsyncCBR
     64:   360.161 [LVDTS] WARN First Get DTS_GetAllRandomData
     65:   382.218 [STARTUP] startupPrepareRemote
     66:   383.067 [AUDIO] RegisterCBRSDIOCableConnect
     67:   384.944 [COM] PackHeap 79491c,79491c,0
     68:   385.330 [COM] Local Heap warning hCom[0]size[262144]
     69:   395.047 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     70:   395.843 [WFT] InitializeAdapterControl END
     71:   404.521 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     72:   404.573 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     73:   404.860 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     74:   404.902 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     75:   406.648 [PTPCOM] SetPtpTransportResources:0,3253
     76:   421.459 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     77:   759.957 [SD] sdSendOCR: CCS=1, S18A=1
     78:   760.063 [SD] Set 1.8V Signaling
     79:   793.456 [SD] sdSendCommand: CMD2 Retry=2(SDSTS_ED)
     80:   796.643 [SD] CARD CAPACITY is 61087Mbyte( 125106176Sec )
     81:   809.046 [SD] SD_GetAccessMode=7
     82:   809.059 [SD] Set Hi-Speed Mode( 96MHz )
     83:   821.381 [FSU] fsuGetPart: Block(32768, 125073408, 125106176)
     84:   875.350 [FM] FileNo (DriveNo = 2, 0 <-> 1977)
     85:   875.399 [FM] FreeCluster (DriveNo = 2, 488111 <-> 488367)
     86:   876.501 [FC] _FC_OpenCatalog : wNumOfDir 1
     87:   889.339 [FM] [GPS] GPS_Initialize (36, 25)
     88:   889.896 [MRK] MRK_Initialize
     89:   890.167 [MRK] mrkSetLockSemaphore
     90:   890.534 [MRK] MRK_PrepareMrkFileObject
     91:   893.621 [SEQ] seqEventDispatch (Startup, 4)
     92:   893.805 [DP] DP_Initialize()
     93:   894.478 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     94:   894.510 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     95:   894.600 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     96:   894.993 [DP] PROP_CONNECT_TARGET [0x00000000]
     97:   895.028 [DP] DpConnectionTarget [0x00000000]
     98:   895.078 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     99:   895.104 [DP] DpConnectionTarget [0x00000000]
    100:   895.157 [DP] LOGICAL_CONNECT [0x00000000]
    101:   895.188 [DP] DpsTerminate()
    102:   895.274 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    103:   895.300 [DP] RD_Cancel No Issue
    104:   895.329 [DP] DpPhysicalConnectFlg [0x00000000]
    105:   895.379 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    106:   895.394 [DP] RD_Cancel No Issue
    107:   895.420 [DP] DpPhysicalConnectFlg [0x00000000]
    108:   895.458 [DP] PROP_NETWORK_SYSTEM


    109:   895.482 [DP] PROP_WIFI_SETTING


    110:   895.740 [DP] [GYO]DpFunctionList[0x10117fff]
    111:   895.857 [DP] X FreeMem Address[0x00000000]
    112:   896.175 [INDEV] INDEV_Initialize
    113:   900.713 [HDMI] DisconnectHDMI : Not Connected
    114:   911.484 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    115:   911.563 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    116:   940.645 [DP] DP_RegisterCBR() Id=1 Count:12
    117:   940.684 [DP] DP_RegisterCBR() Id=2 Count:12
    118:   940.705 [DP] DP_RegisterCBR() Id=4 Count:12
    119:   940.824 [MR] tcmClockEnd
    120:   941.476 [DISP] SetBacklightBrightness called
    121:   952.413 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    122:   965.480 [MR] PROP_MOVIE_PARAM:0
    123:   967.848 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    124:   970.100 [MR] PROP_MOVIE_PARAM:0
    125:   973.246 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    126:   975.135 [CEC]CEC OFF
    127:   977.412 [SEQ] seqEventDispatch (Startup, 5)
    128:   977.437 [STARTUP] startupInitializeComplete
    129:   977.532 [MC] cam event guimode comp. 0
    130:   978.368 [MC] cam event guimode comp. 0
    131:   979.802 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    132:   979.838 [DL] PROP_DL_ACTION (1)
    133:   986.080 [FA] ChangeCBR(ID=0x8003000a)
    134:   986.767 [FA] RequestFromCheckData
    135:   986.991 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    136:   988.072 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    137:   988.285 [DL] PROP_DL_ACTION (0)
    138:   988.561 [DL] localCreateSerialIOChannelForDLIC
    139:   988.631 [DL] localCreateSerialIOChannelForDLIC
    140:   988.675 [DL] localCreateSerialIOChannelForDLIC
    141:   988.714 [DL] localCreateSerialIOChannelForDLIC
    142:   992.862 [DL] localCreateSerialIOChannelForDLIC
    143:   996.991 [DL]executeDL AD Start 69
    144:   997.103 [DL] localCreateSerialIOChannelForDLIC
    145:  1017.341 [TCH]Active_Mode SetEnd
    146:  1038.165 [TCH] [TCH]Variangle_State = 0
    147:  1043.928 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    148:  1046.987 [SEQ] seqEventDispatch (Startup) : End


aedipuss

@Walter Schulz - the code tag is normally used for html not text.  other than you don't like to scroll is there a reason?
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

nikfreak

Scroll will be needed anyways. Posting a link to the logs would have been cleanest solution. I'd say do what Walter requested. It's indeed better readable also tomy eyes.
[size=8pt]70D.112 & 100D.101[/size]

DeafEyeJedi

@Everyone-

I just got my hands back on the 70D at work and downloaded the latest beta from Nov.29th (Thanks @nikfreak!) which seems all well and fine here on my end. I didn't even need to format the card or anything, other than just running the usual Canon Firmware update to reload ML.

I also tested pretty much everything for both Video and Photos which all seems OK other than Dual-ISO Video (still shows that weird Pink artifacts on the lower right corner of LiveView LCD) which is to be expected anyway. Dual-ISO Photos still work great!

As I am digging through previous post from the past several weeks trying to understand what other "issues" that have arise...

Unless I'm missing something that you guys want me to test/troubleshoot something more specific?

@aedipuss -- Agreed with others that it'd be best if you could kindly put your logs into "Insert Code" and allow us do the scrolling ourselves (it's rather easier this way) other than those long unnecessary post which actually grills our eyes out even more, please?
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

nikfreak

Sean, prepare a short dualiso video (nothing big) and add a few dng's  to a folder and share a link if possible. a1ex would like to have a look at it. Maybe you can show also what artifacts shouldn't be on lcd. You do lots of dualiso on other cams so there's something wrong here.
[size=8pt]70D.112 & 100D.101[/size]

DeafEyeJedi

Absolutely, here you go...

70D
https://vimeo.com/147417207

SL1 (for comparison purposes)
https://vimeo.com/147417206

70D Dual-ISO (converted w cr2hdr-r)
https://vimeo.com/147417536

Files (for @a1ex & those that are curious)
https://mega.nz/#F!r11CnAhC!axOTipb9MBBXzVpGzeJeEQ
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

ainu

@nikfreak
With ML 29Nov.
2 CR2 with dual iso (800) enabled. No additional settings. First in photo mode, second in LV. ~53MB
https://drive.google.com/file/d/0B8RdSX_hjqTXNVI2SWNaMDBpa2M/view?usp=sharing

.MLV with dual iso (800) enabled. 5 sec video. No additional settings. ~401 MB
https://drive.google.com/file/d/0B8RdSX_hjqTXQjJkb281Z0xKckU/view?usp=sharing

mlv_rec.tmp ~279 MB
https://drive.google.com/file/d/0B8RdSX_hjqTXVUVQc0FIWUdCS0k/view?usp=sharing
70D.112
Excuse for my English.

aedipuss

here's a video of what happens on my camera with 29nov ml



and the associated error logs

www.minidv2dvd.com/temp/error_log.zip


ok i give, what part of the vimeo url do you put in the tags to get it to show up?  never mind you just have to http not https
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

nikfreak

Ok, I was able to reproduce aedipuss's issue while toggling AF settings.
Everybody immediately better switches back to the Beta-2b build from 1st page. You have been warned. Don't use it any more!!  :P

Links to test builds have been removed. Sometimes sh*z happens. Sorry for the inconvenience and thanx for testing and providing feedback.
[size=8pt]70D.112 & 100D.101[/size]

OlRivrRat

      @NikFreak

   Is it Possibly a Helpful Clue that the Issue Does Not occur on My Early 70D 111B F'W' ?

CORRECTION ~ Hadn't watched his SetUp Vid & was just going by his verbal description. After setting ISO to "Auto" & DualISO to 0/100 & RAW Vid(mlv) On,

my 70D111B became Unhappy in Movie Mode & Did LockUp after Rec was activated but Did Not Display any OnScreen Errors. One Batt' Removal & All was OK.

Then I set ISO to 160 & D'ISO to 200/800 & encountered No Issues in Movie Mode. Rec stopped after 6Sec due to FrameSkip'.

             WILL switch back to Beta-2b ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

nikfreak

For the time being I recommend everone to switch back and strictly use Beta-2b only. I wasn't able to reproduce aedipuss's issues but once it happened I even struggled to get the lcd powered on(taking battery out for several times didn't help first  :o). We will look into the issues thoroughly at a later time and the test builds didn't contain new features anyways. So please, again, switch back! You can only win when doingso or rather lose if you continue to use the test build.
[size=8pt]70D.112 & 100D.101[/size]

TechnoPilot

Interestingly though this sounds like the same issue I was having on my 70D.111B install, I just didn't have that much in my crash log...
Cameras: Canon 70D - 70D.111B (Beta 2B)
Lenses: Sigma 18-35mm F1.8, Sigma 50-150mm F2.8 II
Video Gear: Shure Lenshopper VP83F, Rode Filmmaker Kit, DSLR Controller w/ TPLink MR3040

OlRivrRat

      @NikFreak

   On a separate note ~ Is there a way & if so would you be so kind as to pass on what you did for us regarding the Time Indicator & File# on to the Folks

that are Maintaining the 5DMk2 Builds ? Thanks Much again for all Your Great Efforts ~ Hope You Are Having Fun ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

aedipuss

sorry for being a pain in the arse but i didn't think i was crazy. 

@nitfreak - please keep up the great work, my cameras would be nikons if it weren't for guys like you.  i enjoy the extra features very much!  thx again.
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

OlRivrRat

      @NikFreak

   Just attempted the "Aedipuss Anomaly" with Beta-2b & got 4sec of Vid before Frame Drop Stop & then during an attempt @ Playback the Cam Froze

requiring Batt' Remove to Resurrect. Not a problem for Me as I don't shoot RAW Vid or Dual ISO with my 70D due to having No Way to Process the Results.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

nikfreak

Hmm let's take a deep breath and re-start from scratch. Maybe also a good idea to reset settings and be rest assured that there are no leftovers from the test builds on the card. Once an "Anomaly" occurs just provide step-by-step details on how to reproduce.
[size=8pt]70D.112 & 100D.101[/size]

kriso

Hey guys! I have 70D and I use ML on 64bg card and I'd just like to thank all of you developers and testers who invest their knowledge and time into this software! Seems like 70D dosen't lends itself easy to hacking from what I read. Im so exited about the FPS override (timelapse) and Audio meters features. Wish you guys good luck, I shall report if anything occurs here!

OlRivrRat

      @NikFreak

   On Your latest Recommend' I Decided to Set Aside the card I had been using the past few days & do the "Aedipuss Anomaly" test with a Card that has

been Idle since 08Aug when Alpha 7.2 was Loaded on it. The Issue occurred as soon as I Switched to Movie Mode. I seem to think it has something to do with

"Auto ISO" being "On" along with "Dual ISO". I can't imagine that that Combo makes the Processor too Happy ~ Also Can't Imagine why 1 would want to use

that Combo.

Just to be Clear ~ This Card has 08Aug Alpha 7.2 on it as I thought I would try that Prior to Cleaning it & Loading Beta-2b.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

DeafEyeJedi

Quote from: aedipuss on December 01, 2015, 09:25:33 PM
sorry for being a pain in the arse but i didn't think i was crazy. 

@nitfreak - please keep up the great work, my cameras would be nikons if it weren't for guys like you.  i enjoy the extra features very much!  thx again.

Glad you got it working and Thanks for reporting to us!

Quote from: nikfreak on December 01, 2015, 08:06:41 PM
For the time being I recommend everone to switch back and strictly use Beta-2b only. I wasn't able to reproduce aedipuss's issues but once it happened I even struggled to get the lcd powered on(taking battery out for several times didn't help first  :o). We will look into the issues thoroughly at a later time and the test builds didn't contain new features anyways. So please, again, switch back! You can only win when doingso or rather lose if you continue to use the test build.

Nice work and good Catch, Thanks for the clarifications!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

aedipuss

@ OlRivrRat it also happens if you have auto iso on and dual iso off.  it also happens if you are trying to record standard mov mp4 and not mlv or raw. it also happens with absolutely no ml modules turned on.
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112