Canon 70D

Started by nikfreak, January 15, 2015, 12:22:15 AM

Previous topic - Next topic

0 Members and 5 Guests are viewing this topic.

nikfreak

Thanx for testing. Just was hinted that dualiso needs some rework as the adresses change by using the new boot method.I therefore removed the test builds and going to release a new updated one later after doing some own tests and finding the new dualiso values with adtg gui.
[size=8pt]70D.112 & 100D.101[/size]

OlRivrRat

      @NikFreak

   Just Downloaded Most Recent ~ Am Labeling All Todays Test Builds " Beta~2.0.d " to avoid confusion & For Now they are being kept in Folders Lbld

Bttr & MoBttr ~

   Latest Also Seems To Be Quite Functional ~ Will test Dual ISO later. Have tried to replicate TecPi's issues & No Problems seen.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

nikfreak

@OlRivrRat: dualiso won't work with the test builds.I am just doing some own tests to get it working again with the new boot method. Afterwards we can do some dualiso tests here
[size=8pt]70D.112 & 100D.101[/size]

OlRivrRat

                     @NikFreak

           OK I Guess ~ What did you mean then by this request ~

QuoteWhat to look for?

Just test-drive the build. Anything wrong?

The only thing I added on top of the new boot method is Dual Iso support in movie mode. I now need someone to take some time and simply retry it again. If it still causes problems (which I expect but who knows..): Upload a few dng frames[/b] of the dual iso movie and post a link here so we can point a1ex to have a look at those dng's.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

nikfreak

[size=8pt]70D.112 & 100D.101[/size]

nikfreak

[size=8pt]70D.112 & 100D.101[/size]

aedipuss

am i the only one having nothing but problems with the new beta?  i installed todays on a used card.  boots fine but crashes all over the place.  somehow all the overlays are gone.  just turning movie mode on with dual iso on locks up the camera.  err 70  err 80.  i have some logs if you want them.

so i started over and re-formatted the card.  copied over the new beta.  did the update firmware.  it gets to the reboot camera ok, but when rebooted the red light comes on and the camera is hard locked.  did it over again to verify.  it won't boot using the new beta.

reformatted card installed the 11-26 firmware and everything is back to working.
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

Walter Schulz


nikfreak

Removed the links again - though I have no problems at all. So yes, post your logs!
[size=8pt]70D.112 & 100D.101[/size]

Coolwatercorey

whats up people,

Im very new to this ml world, but I just got a 70d, & the .111a version works for me,ive been testing everything for the past week, but does anyone have a link of how to use the dualiso movie mode? it works fine for raw photos & ive downloaded all the cr2hdr stuff and converters, but as far as in camera when I record at 24 or 30fps i get red and blue flickers, but not when i record at 60fps, is this normal does anyone have a link to examples of the in camera part or something?

thanks, im willing to help out.

i am running magiclantern-Nightly.2015Nov29.70D111A
canon 70d -Nightly.2015Nov29.70D111A
canon 600d win7

OlRivrRat

                     @Coolwatercorey

           Welcome Aboard ~ Please be more specific as to Which Version of 111A You are Running.

                                                                                                        ORR ~ DeanB
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

aedipuss

a pair of logs -

crash00.log
ASSERT: 0
at ./Memory/Memory.c:575, AeWb:3db28
lv:1 mode:22


Magic Lantern version : Nightly.2015Nov29.70D111A
Mercurial changeset   : 0a981f3d2abf+ (70D-merge-dryos-hooks) tip
Built on 2015-11-29 11:22:59 UTC by ml@ml-pc.
Free Memory  : 238K + 2393K

log000.log
Sun Nov 29 12:17:59 2015
      0:    48.269 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.293 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.814 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.470 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.290 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.313 [STARTUP] startupEntry
      6:   105.384 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.564 [STARTUP] startupPropAdminMain : End
      8:   105.668 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   147.340 [SEQ] seqEventDispatch (Startup, 1)
     10:   147.383 [STARTUP] startupPrepareProperty
     11:   149.439 [PROPST] CLR Adjective & Situation : AEMode -> StartupCondition
     12:   150.099 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     13:   151.726 [RTC] ChangePropertyCBR 0x0, 0x4000
     14:   151.973 [RTC] RTC_Permit 0x20
     15:   152.421 [SND] Seq LPC fin
     16:   152.845 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     17:   154.065 [RSC] MemoryStatusMasterResultCBR
     18:   183.486 [FM] FM_RegisterSpaceNotifyCallback
     19:   183.527 [MRK] MRK_RegisterSpaceNotifyCallback
     20:   183.576 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     21:   183.660 [FM] FM_RegisterSpaceNotifyCallback
     22:   183.954 [JOB] InitializeJobClass (ID = 1754, Num = 13)
     23:   193.327 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     24:   195.479 [JOB] InitializeInnerDevelopJobClass (ID = 1754, Num = 16)
     25:   195.510 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     26:   195.531 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     27:   195.554 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     28:   195.573 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     29:   195.596 [JOB] InitializeGISShootJobClass ( Num = 12 )
     30:   195.619 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     31:   195.723 [TERMINATE] SHUTDOWN init comp
     32:   195.773 [TERMINATE] Abort init comp
     33:   204.207 [FM] fmPrepare : Completed
     34:   204.344 [SEQ] seqEventDispatch (Startup, 2)
     35:   204.715 [SHTRD] [MNAV]Init
     36:   204.926 [SHTRD] [MNAV]SetMMap:1
     37:   208.119 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     38:   253.492 [SEQ] seqEventDispatch (Startup, 3)
     39:   255.387 [MC] PROP_GUI_STATE 0
     40:   256.453 [MC] PROP_VARIANGLE_GUICTRL : Enable
     41:   256.520 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     42:   256.668 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     43:   256.829 [MC] PROP_LCD_OFFON_BUTTON : 2
     44:   257.805 [MC] regist master CardCover
     45:   260.260 [PRP] M:B1 F:0 L:0 P:32 T:8
     46:   260.412 [STARTUP] update coded version.
     47:   260.486 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     48:   261.234 [STARTUP] Set_AVS 60
     49:   264.333 [STARTUP] startupPrepareDevelop
     50:   267.831 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     51:   268.521 [PROPAD] SerialFlash Packages!! 0x490000
     52:   302.704 [PROPAD] SerialFlash Packages!! 0x7
     53:   304.123 [MAC] MAC_Initialize
     54:   304.489 [MAC] K_BOARDID4
     55:   304.532 [MAC] K_BOARDID3
     56:   304.566 [MAC] K_BOARDID2
     57:   304.596 [MAC] K_BOARDID1
     58:   304.783 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     59:   314.596 [SHTP] RegRPCHandler Master
     60:   340.793 [MR] TimeCode Mode:1
     61:   340.908 [MR] TimeCode DropFrame Mode:1
     62:   340.943 [MR] PROP_MOVIE_PARAM:0
     63:   346.424 [HPC] ReserveHPCopyChannel (1, 116)
     64:   358.180 [MR] encdrwrapHPCopyAsyncCBR
     65:   360.959 [LVDTS] WARN First Get DTS_GetAllRandomData
     66:   382.508 [STARTUP] startupPrepareRemote
     67:   383.355 [AUDIO] RegisterCBRSDIOCableConnect
     68:   385.515 [COM] PackHeap 794420,794420,0
     69:   385.833 [COM] Local Heap warning hCom[0]size[262144]
     70:   395.475 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     71:   396.257 [WFT] InitializeAdapterControl END
     72:   405.320 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     73:   405.366 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     74:   405.645 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     75:   405.683 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     76:   407.450 [PTPCOM] SetPtpTransportResources:0,3253
     77:   423.358 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     78:   597.572 [SD] sdSendOCR: CCS=1, S18A=1
     79:   597.680 [SD] Set 1.8V Signaling
     80:   632.222 [SD] CARD CAPACITY is 61119Mbyte( 125171712Sec )
     81:   645.078 [SD] SD_GetAccessMode=7
     82:   645.090 [SD] Set Hi-Speed Mode( 96MHz )
     83:   645.909 [FSU] fsuGetPart: Block(32768, 125138944, 125171712)
     84:   690.476 [FM] FileNo (DriveNo = 2, 0 <-> 1764)
     85:   690.604 [FC] _FC_OpenCatalog : wNumOfDir 1
     86:   697.992 [FM] [GPS] GPS_Initialize (36, 25)
     87:   698.574 [MRK] MRK_Initialize
     88:   698.841 [MRK] mrkSetLockSemaphore
     89:   699.219 [MRK] MRK_PrepareMrkFileObject
     90:   702.314 [SEQ] seqEventDispatch (Startup, 4)
     91:   702.490 [DP] DP_Initialize()
     92:   703.171 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     93:   703.206 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     94:   703.298 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     95:   703.708 [DP] PROP_CONNECT_TARGET [0x00000000]
     96:   703.743 [DP] DpConnectionTarget [0x00000000]
     97:   703.796 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     98:   703.823 [DP] DpConnectionTarget [0x00000000]
     99:   703.879 [DP] LOGICAL_CONNECT [0x00000000]
    100:   703.909 [DP] DpsTerminate()
    101:   703.997 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    102:   704.023 [DP] RD_Cancel No Issue
    103:   704.049 [DP] DpPhysicalConnectFlg [0x00000000]
    104:   704.098 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    105:   704.109 [DP] RD_Cancel No Issue
    106:   704.132 [DP] DpPhysicalConnectFlg [0x00000000]
    107:   704.170 [DP] PROP_NETWORK_SYSTEM [0]
    108:   704.197 [DP] PROP_WIFI_SETTING [0]
    109:   704.461 [DP] [GYO]DpFunctionList[0x10117fff]
    110:   704.583 [DP] X FreeMem Address[0x00000000]
    111:   704.918 [INDEV] INDEV_Initialize
    112:   709.546 [HDMI] DisconnectHDMI : Not Connected
    113:   720.333 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    114:   720.410 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    115:   749.985 [DP] DP_RegisterCBR() Id=1 Count:12
    116:   750.032 [DP] DP_RegisterCBR() Id=2 Count:12
    117:   750.055 [DP] DP_RegisterCBR() Id=4 Count:12
    118:   750.167 [MR] tcmClockEnd
    119:   750.832 [DISP] SetBacklightBrightness called
    120:   761.724 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    121:   774.731 [MR] PROP_MOVIE_PARAM:0
    122:   776.813 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    123:   779.440 [MR] PROP_MOVIE_PARAM:0
    124:   782.546 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    125:   784.611 [CEC]CEC OFF
    126:   786.870 [SEQ] seqEventDispatch (Startup, 5)
    127:   786.896 [STARTUP] startupInitializeComplete
    128:   786.994 [MC] cam event guimode comp. 0
    129:   787.835 [MC] cam event guimode comp. 0
    130:   789.246 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    131:   789.282 [DL] PROP_DL_ACTION (1)
    132:   795.829 [FA] ChangeCBR(ID=0x8003000a)
    133:   796.554 [FA] RequestFromCheckData
    134:   796.985 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    135:   797.860 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    136:   798.068 [DL] PROP_DL_ACTION (0)
    137:   798.350 [DL] localCreateSerialIOChannelForDLIC
    138:   798.421 [DL] localCreateSerialIOChannelForDLIC
    139:   798.461 [DL] localCreateSerialIOChannelForDLIC
    140:   798.494 [DL] localCreateSerialIOChannelForDLIC
    141:   802.653 [DL] localCreateSerialIOChannelForDLIC
    142:   806.787 [DL]executeDL AD Start 69
    143:   806.879 [DL] localCreateSerialIOChannelForDLIC
    144:   827.349 [TCH]Active_Mode SetEnd
    145:   848.046 [TCH] [TCH]Variangle_State = 0
    146:   853.918 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    147:   857.046 [SEQ] seqEventDispatch (Startup) : End


canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

aedipuss

there are more but most seem the same except this one.

Sun Nov 29 12:21:27 2015
      0:    48.259 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.284 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.834 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.492 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.311 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.339 [STARTUP] startupEntry
      6:   105.300 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.466 [STARTUP] startupPropAdminMain : End
      8:   105.572 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   151.367 [SEQ] seqEventDispatch (Startup, 1)
     10:   151.400 [STARTUP] startupPrepareProperty
     11:   153.307 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   154.819 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   155.072 [RTC] RTC_Permit 0x20
     14:   155.658 [SND] Seq LPC fin
     15:   156.085 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   157.177 [RSC] MemoryStatusMasterResultCBR
     17:   177.064 [FM] FM_RegisterSpaceNotifyCallback
     18:   177.109 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   177.160 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   177.223 [FM] FM_RegisterSpaceNotifyCallback
     21:   177.482 [JOB] InitializeJobClass (ID = 1754, Num = 13)
     22:   179.605 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   181.981 [JOB] InitializeInnerDevelopJobClass (ID = 1754, Num = 16)
     24:   182.012 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   182.036 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   182.059 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   182.078 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   182.101 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   182.129 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   182.239 [TERMINATE] SHUTDOWN init comp
     31:   182.289 [TERMINATE] Abort init comp
     32:   373.332 [SD] sdSendOCR: CCS=1, S18A=1
     33:   373.444 [SD] Set 1.8V Signaling
     34:   407.923 [SD] CARD CAPACITY is 61119Mbyte( 125171712Sec )
     35:   420.263 [SD] SD_GetAccessMode=7
     36:   420.280 [SD] Set Hi-Speed Mode( 96MHz )
     37:   421.085 [FSU] fsuGetPart: Block(32768, 125138944, 125171712)
     38:   470.805 [SEQ] seqEventDispatch (Startup, 2)
     39:   471.173 [SHTRD] [MNAV]Init
     40:   471.387 [SHTRD] [MNAV]SetMMap:1
     41:   474.575 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     42:   520.233 [SEQ] seqEventDispatch (Startup, 3)
     43:   522.185 [MC] PROP_GUI_STATE 0
     44:   523.331 [MC] PROP_VARIANGLE_GUICTRL : Enable
     45:   523.397 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     46:   523.576 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     47:   523.754 [MC] PROP_LCD_OFFON_BUTTON : 2
     48:   524.697 [MC] regist master CardCover
     49:   527.039 [PRP] M:B1 F:0 L:0 P:32 T:8
     50:   527.263 [STARTUP] update coded version.
     51:   527.343 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     52:   529.185 [STARTUP] Set_AVS 60
     53:   532.247 [STARTUP] startupPrepareDevelop
     54:   538.587 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     55:   541.642 [PROPAD] SerialFlash Packages!! 0x490000
     56:   575.832 [PROPAD] SerialFlash Packages!! 0x7
     57:   577.285 [MAC] MAC_Initialize
     58:   577.675 [MAC] K_BOARDID4
     59:   577.718 [MAC] K_BOARDID3
     60:   577.753 [MAC] K_BOARDID2
     61:   577.783 [MAC] K_BOARDID1
     62:   577.963 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     63:   587.860 [SHTP] RegRPCHandler Master
     64:   614.369 [MR] TimeCode Mode:1
     65:   614.491 [MR] TimeCode DropFrame Mode:1
     66:   614.525 [MR] PROP_MOVIE_PARAM:0
     67:   620.557 [HPC] ReserveHPCopyChannel (1, 116)
     68:   632.328 [MR] encdrwrapHPCopyAsyncCBR
     69:   635.323 [LVDTS] WARN First Get DTS_GetAllRandomData
     70:   657.297 [STARTUP] startupPrepareRemote
     71:   658.148 [AUDIO] RegisterCBRSDIOCableConnect
     72:   660.290 [COM] PackHeap 794564,794564,0
     73:   660.613 [COM] Local Heap warning hCom[0]size[262144]
     74:   670.686 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     75:   671.505 [WFT] InitializeAdapterControl END
     76:   680.650 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     77:   680.697 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     78:   680.979 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     79:   681.016 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     80:   682.739 [PTPCOM] SetPtpTransportResources:0,3253
     81:   698.549 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     82:   706.742 [FC] _FC_OpenCatalog : wNumOfDir 1
     83:   715.050 [FM] [GPS] GPS_Initialize (36, 25)
     84:   715.676 [MRK] MRK_Initialize
     85:   715.945 [MRK] mrkSetLockSemaphore
     86:   716.374 [MRK] MRK_PrepareMrkFileObject
     87:   718.680 [SEQ] seqEventDispatch (Startup, 4)
     88:   718.864 [DP] DP_Initialize()
     89:   719.543 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     90:   719.579 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     91:   719.670 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     92:   720.078 [DP] PROP_CONNECT_TARGET [0x00000000]
     93:   720.112 [DP] DpConnectionTarget [0x00000000]
     94:   720.164 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     95:   720.190 [DP] DpConnectionTarget [0x00000000]
     96:   720.241 [DP] LOGICAL_CONNECT [0x00000000]
     97:   720.273 [DP] DpsTerminate()
     98:   720.366 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
     99:   720.391 [DP] RD_Cancel No Issue
    100:   720.415 [DP] DpPhysicalConnectFlg [0x00000000]
    101:   720.465 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    102:   720.479 [DP] RD_Cancel No Issue
    103:   720.502 [DP] DpPhysicalConnectFlg [0x00000000]
    104:   720.540 [DP] PROP_NETWORK_SYSTEM [0]
    105:   720.564 [DP] PROP_WIFI_SETTING [0]
    106:   720.850 [DP] [GYO]DpFunctionList[0x10117fff]
    107:   720.972 [DP] X FreeMem Address[0x00000000]
    108:   721.287 [INDEV] INDEV_Initialize
    109:   725.987 [HDMI] DisconnectHDMI : Not Connected
    110:   736.715 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    111:   736.785 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    112:   766.869 [DP] DP_RegisterCBR() Id=1 Count:12
    113:   766.902 [DP] DP_RegisterCBR() Id=2 Count:12
    114:   766.920 [DP] DP_RegisterCBR() Id=4 Count:12
    115:   767.053 [MR] tcmClockEnd
    116:   767.764 [DISP] SetBacklightBrightness called
    117:   778.633 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    118:   791.533 [MR] PROP_MOVIE_PARAM:0
    119:   793.661 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    120:   795.893 [MR] PROP_MOVIE_PARAM:0
    121:   799.308 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    122:   801.421 [CEC]CEC OFF
    123:   803.710 [SEQ] seqEventDispatch (Startup, 5)
    124:   803.734 [STARTUP] startupInitializeComplete
    125:   803.830 [MC] cam event guimode comp. 0
    126:   804.636 [MC] cam event guimode comp. 0
    127:   806.041 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    128:   806.077 [DL] PROP_DL_ACTION (1)
    129:   821.860 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(1)
    130:   822.125 [FA] ChangeCBR(ID=0x8003000a)
    131:   822.877 [FA] RequestFromCheckData
    132:   827.660 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    133:   838.375 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    134:   843.631 [DP] PROP_WIFI_SETTING [0]
    135:   843.988 [DP] PROP_NETWORK_SYSTEM [0]
    136:   845.468 [MR] PROP_MOVIE_PARAM:0
    137:   851.072 [DP] PROP_WIFI_SETTING [0]
    138:   851.654 [DP] PROP_NETWORK_SYSTEM [0]
    139:   852.794 [MR] PROP_MOVIE_PARAM:0
    140:   855.707 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
    141:   855.791 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
    142:   855.823 [DP] DpConnectionTarget [0x00000000]
    143:   856.499 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
    144:   856.585 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
    145:   856.616 [DP] DpConnectionTarget [0x00000000]
    146:   861.979 [SHTRD] [MNAV]SetMMap:2
    147:   863.216 [SHTRD] [MNAV]SetMMap:2
    148:   863.275 [SHTRD] [MNAV]SetTopAddr[2] (4b000000 50000000)(4b000000 50000000)
    149:   890.788 [ATKCOM] Send Bv(NG):61 Tv:65 Av:29 Iso:65 0 0 1 0 ST:0
    150:   892.139 [TCH]Active_Mode SetEnd
    151:   899.108 [CAPD] LvdsCalclkCtrlMaster
    152:   899.118 [CAPD] ImagePowerOn
    153:   908.983 [LVEVF] ShootingMode(2), FrameRate(5)
    154:  1022.292 [WINSYS] Zlib maxsize update 884
    155:  1022.345 [WINSYS] Zlib maxsize update 1396
    156:  1066.855 [TCH] [TCH]Variangle_State = 0
    157:  1067.555 [SEQ] seqEventDispatch (Startup) : End
    158:  1229.107 [ATKAEC] *** ValidResult (Bv:62,0,8)==TRUE ***
    159:  1229.683 [ATKAE] WARN AE_CALC_AEControl : Before 1st AE Metering
    160:  1319.079 [ATKCOM] Send Bv(OK):61 Tv:65 Av:29 Iso:65 0 0 1 0 ST:0
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

aedipuss

did anyone else try installing that latest beta from a freshly formatted memory card?
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

bombobrudi

Yes, I am using the Beta-2b with fresh formatted card. No problems for me.
Canon 70D (70D.111A)

aedipuss

bombobrundi - the ml build was from today nov 29 that i referred to.  not the nov 26 build, that one works fine here also.  the new one has been withdrawn for now.
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

OlRivrRat

                     @Aedipuss

           Just So Ya Know ~ I am running ML70D111B Beta2C(D) that was Built 28Nov15 @ 20.50.58UTC & All seems to be Functioning as Expected.

BTW ~ Can anybody In The Know say what Clock this Forum is running on as the latest post is Timed 12.56.35 AM 30Nov & it is Now only 12.31.** AM

30Nov (actually 00.31.** UTC 30 Nov)?
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

lubo

I'm using the latest beta available for download, it's 26.11 working perfectly ... but can't find the latest one 29.11

nikfreak

Here again the latest test build from 29th Nov. Either run that or revert to Beta-2b from 1st page - but nothing in between please (OlRivrRat / who else?...)! removed as it was unstable

@aedipuss: how about resetting camera settings from Canon menu and CFn settings, too?
[size=8pt]70D.112 & 100D.101[/size]

starbase64

@nikfreak

i have tested build from 29Nov, but all the functions that i use works fine.

aedipuss

@nitfreak - ok - cleared all settings.  actually got nov29 to update firmware on a freshly formatted card.  turned on nothing in ml.  no modules.  turn on movie mode to record some video in mov mp4.  overlays were there this time, but camera crashed error 70 in about 10 seconds, before even attempting to record anything.  removed nov29 card, put in nov26 card, turn on camera, turn on movie mode haven't changed anything, it works fine.

errlog

Mon Nov 30 11:49:19 2015
      0:    48.277 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.299 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.827 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.482 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.310 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.333 [STARTUP] startupEntry
      6:   105.399 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.586 [STARTUP] startupPropAdminMain : End
      8:   105.704 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   146.411 [SEQ] seqEventDispatch (Startup, 1)
     10:   146.448 [STARTUP] startupPrepareProperty
     11:   149.598 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   151.004 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   151.258 [RTC] RTC_Permit 0x20
     14:   151.708 [SND] Seq LPC fin
     15:   152.136 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   153.104 [RSC] MemoryStatusMasterResultCBR
     17:   169.574 [FM] FM_RegisterSpaceNotifyCallback
     18:   169.614 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   169.661 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   169.729 [FM] FM_RegisterSpaceNotifyCallback
     21:   170.167 [JOB] InitializeJobClass (ID = 1964, Num = 13)
     22:   187.608 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   190.984 [JOB] InitializeInnerDevelopJobClass (ID = 1964, Num = 16)
     24:   191.020 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   191.044 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   191.065 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   191.084 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   191.107 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   191.131 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   191.244 [TERMINATE] SHUTDOWN init comp
     31:   191.300 [TERMINATE] Abort init comp
     32:   555.253 [SD] sdSendOCR: CCS=1, S18A=1
     33:   555.366 [SD] Set 1.8V Signaling
     34:   588.712 [SD] sdSendCommand: CMD2 Retry=2(SDSTS_ED)
     35:   591.901 [SD] CARD CAPACITY is 61087Mbyte( 125106176Sec )
     36:   604.359 [SD] SD_GetAccessMode=7
     37:   604.371 [SD] Set Hi-Speed Mode( 96MHz )
     38:   769.885 [FSU] fsuGetPart: Block(32768, 125073408, 125106176)
     39:   856.989 [SEQ] seqEventDispatch (Startup, 2)
     40:   857.385 [SHTRD] [MNAV]Init
     41:   857.606 [SHTRD] [MNAV]SetMMap:1
     42:   860.724 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     43:   906.038 [SEQ] seqEventDispatch (Startup, 3)
     44:   907.948 [MC] PROP_GUI_STATE 0
     45:   909.068 [MC] PROP_VARIANGLE_GUICTRL : Enable
     46:   909.132 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     47:   909.284 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     48:   909.436 [MC] PROP_LCD_OFFON_BUTTON : 2
     49:   910.343 [MC] regist master CardCover
     50:   912.753 [PRP] M:B1 F:0 L:0 P:32 T:8
     51:   912.966 [STARTUP] update coded version.
     52:   913.066 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     53:   914.595 [STARTUP] Set_AVS 60
     54:   917.617 [STARTUP] startupPrepareDevelop
     55:   921.026 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     56:   921.716 [PROPAD] SerialFlash Packages!! 0x490000
     57:   955.842 [PROPAD] SerialFlash Packages!! 0x7
     58:   957.277 [MAC] MAC_Initialize
     59:   957.605 [MAC] K_BOARDID4
     60:   957.644 [MAC] K_BOARDID3
     61:   957.683 [MAC] K_BOARDID2
     62:   957.708 [MAC] K_BOARDID1
     63:   957.882 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     64:   967.678 [SHTP] RegRPCHandler Master
     65:   993.627 [MR] TimeCode Mode:1
     66:   993.730 [MR] TimeCode DropFrame Mode:1
     67:   993.765 [MR] PROP_MOVIE_PARAM:0
     68:   999.209 [HPC] ReserveHPCopyChannel (1, 116)
     69:  1011.007 [MR] encdrwrapHPCopyAsyncCBR
     70:  1013.469 [LVDTS] WARN First Get DTS_GetAllRandomData
     71:  1034.889 [STARTUP] startupPrepareRemote
     72:  1035.745 [AUDIO] RegisterCBRSDIOCableConnect
     73:  1037.704 [COM] PackHeap 794838,794838,0
     74:  1038.021 [COM] Local Heap warning hCom[0]size[262144]
     75:  1047.863 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     76:  1048.680 [WFT] InitializeAdapterControl END
     77:  1057.361 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     78:  1057.410 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     79:  1057.697 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     80:  1057.737 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     81:  1059.522 [PTPCOM] SetPtpTransportResources:0,3253
     82:  1075.893 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     83:  1084.010 [FC] _FC_OpenCatalog : wNumOfDir 1
     84:  1092.151 [FM] [GPS] GPS_Initialize (36, 25)
     85:  1092.709 [MRK] MRK_Initialize
     86:  1092.981 [MRK] mrkSetLockSemaphore
     87:  1093.361 [MRK] MRK_PrepareMrkFileObject
     88:  1095.513 [SEQ] seqEventDispatch (Startup, 4)
     89:  1095.697 [DP] DP_Initialize()
     90:  1096.365 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     91:  1096.402 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     92:  1096.493 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     93:  1096.883 [DP] PROP_CONNECT_TARGET [0x00000000]
     94:  1096.917 [DP] DpConnectionTarget [0x00000000]
     95:  1096.973 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     96:  1097.003 [DP] DpConnectionTarget [0x00000000]
     97:  1097.078 [DP] LOGICAL_CONNECT [0x00000000]
     98:  1097.116 [DP] DpsTerminate()
     99:  1097.196 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    100:  1097.224 [DP] RD_Cancel No Issue
    101:  1097.249 [DP] DpPhysicalConnectFlg [0x00000000]
    102:  1097.310 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    103:  1097.322 [DP] RD_Cancel No Issue
    104:  1097.343 [DP] DpPhysicalConnectFlg [0x00000000]
    105:  1097.385 [DP] PROP_NETWORK_SYSTEM [0]
    106:  1097.414 [DP] PROP_WIFI_SETTING [0]
    107:  1097.669 [DP] [GYO]DpFunctionList[0x10117fff]
    108:  1097.792 [DP] X FreeMem Address[0x00000000]
    109:  1098.112 [INDEV] INDEV_Initialize
    110:  1102.642 [HDMI] DisconnectHDMI : Not Connected
    111:  1113.470 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    112:  1113.544 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    113:  1142.482 [DP] DP_RegisterCBR() Id=1 Count:12
    114:  1142.523 [DP] DP_RegisterCBR() Id=2 Count:12
    115:  1142.544 [DP] DP_RegisterCBR() Id=4 Count:12
    116:  1142.651 [MR] tcmClockEnd
    117:  1143.282 [DISP] SetBacklightBrightness called
    118:  1154.145 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    119:  1167.183 [MR] PROP_MOVIE_PARAM:0
    120:  1169.269 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    121:  1171.474 [MR] PROP_MOVIE_PARAM:0
    122:  1174.524 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    123:  1176.446 [CEC]CEC OFF
    124:  1179.004 [SEQ] seqEventDispatch (Startup, 5)
    125:  1179.030 [STARTUP] startupInitializeComplete
    126:  1179.125 [MC] cam event guimode comp. 0
    127:  1179.973 [MC] cam event guimode comp. 0
    128:  1181.399 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    129:  1181.441 [DL] PROP_DL_ACTION (1)
    130:  1187.889 [FA] ChangeCBR(ID=0x8003000a)
    131:  1188.570 [FA] RequestFromCheckData
    132:  1188.792 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    133:  1190.773 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    134:  1190.994 [DL] PROP_DL_ACTION (0)
    135:  1191.286 [DL] localCreateSerialIOChannelForDLIC
    136:  1191.362 [DL] localCreateSerialIOChannelForDLIC
    137:  1191.404 [DL] localCreateSerialIOChannelForDLIC
    138:  1191.442 [DL] localCreateSerialIOChannelForDLIC
    139:  1195.599 [DL] localCreateSerialIOChannelForDLIC
    140:  1199.729 [DL]executeDL AD Start 69
    141:  1199.825 [DL] localCreateSerialIOChannelForDLIC
    142:  1227.357 [TCH]Active_Mode SetEnd
    143:  1241.030 [TCH] [TCH]Variangle_State = 0
    144:  1245.786 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    145:  1249.009 [SEQ] seqEventDispatch (Startup) : End
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

aedipuss

p.s.  i got the nov29 firmware to install by formatting the card on my computer today.  it wouldn't install on a card formatted in the camera yesterday.
canon 600d
canon 60d - Nightly.2016Apr17.60D111
canon 70d - 112

OlRivrRat

      @NikFreak

   TestBuild 29Nov Seems Alive & Well here. Anything in particular that you would like tested 1st ?
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Walter Schulz

@aedipuss: Format card in cardreader, format card in cam. Then copy extracted ML files to card and run install. Results?

If it works: Format card in cam with "Keep ML" option. ML still working? If not: Report back. If it works: Are you able to run firmware update without errors?
If so: Format card with "Remove ML" option. You should be unable to use this card for firmware update until you copy files over again.
Test and report results, please.

lubo

Hello, flashed the 2911 version, for 10 minutes had 3 crashes when I had to remove my battery in order to restart, I'll send the archive with the logs when I find a way how to do it in the forum via my Android, because I don't have a computer here.

I haven't formatted the card, just made a copy of the 2611 version, deleted the files and directory ML, pasted the new version and copied only the MM config files from 2611 from the backup ...