Canon 70D

Started by nikfreak, January 15, 2015, 12:22:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Canniballissimo

Remove SD-card and format it in your PC.

TechnoPilot

Quote from: Canniballissimo on July 22, 2015, 06:24:19 AM
Remove SD-card and format it in your PC.
Hi hate to say, but that is probably not the best option as it would leave the boot flag intact on his 70D.

If you are just trying to roll back simply delete all the ML files from the SD card and replace them with the version you are wanting to load.  Just remember to ensure it is the correct A or B build.

If you are wanting to uninstall ML then simply go to the update firmware option in the Canon menu and wait for the timer on ML to run out (60 seconds).  If that is not working on the newest build then try rolling back first as I know Alpha5b worked for this.
Cameras: Canon 70D - 70D.111B (Beta 2B)
Lenses: Sigma 18-35mm F1.8, Sigma 50-150mm F2.8 II
Video Gear: Shure Lenshopper VP83F, Rode Filmmaker Kit, DSLR Controller w/ TPLink MR3040

KsCanon

I made the post bout not being able to remove ML,
It was a lame brain moment on my part. I didn't have my camera in Manual. I figured it out. Tried to delete my post before anyone replied.

Thank you for your help
Canon 70D A

sergey

Help!
File.DNG (size 35.1 MB , 20 MPix)  received in ML should open in  LR 6.1 or PS 2015 CC (Windows) ?
Or it is necessary to convert than ?
70D_111A

Frank7D

sergey,

Are your DNGs not opening in those programs?

DeafEyeJedi

@sergey:

Which converters did you use that spitted out DNG's that wouldn't open?

Sounds Iike you didn't replace the cr2hdr binary to the latest to work with 70D files.
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

nikfreak

Quote from: DeafEyeJedi on July 21, 2015, 01:28:50 AM
https://vimeo.com/134043093

Got same results with dualiso in moviemode like seen in your video. I rechecked again but the cmos registers are ok and I have no clue atm what is causing the mangled lcd colors.
[size=8pt]70D.112 & 100D.101[/size]

mrpanda

Hello,
I do not know if this is the right place for this question but my English is not very good and I know that this subject on the 70D on this forum.
I wanted to know Max resolution that could save the 70D in RAW and the most aproprier SD card for this use (speed Writing )
RAW because I see the video on YT 70d and wanted to know the resolution used when recording
thanking you

Best regards

Bonjour,
je sais pas si c'est le bon endroit pour cette question mais mon anglais n'est pas tres bon et je connais que ce sujet sur le 70D sur ce forum.
je voulais savoir la resolution Max que pouvais enregistrer le 70D en RAW et la carte SD la plus aproprier pour cette utilisation (vitesse d'ecriture)
car je vois des video RAW du 70d sur YT et je voulais savoir la résolution utiliser lors de l'enregistrement
en vous remerciant

cordialement

JonnyG70D

I just successfully installed ML 111A on my 70D.  One of the major reasons I was interested in ML was to shoot raw video.

Unfortunately I don't have any cards that read the higher speed.

I am buying some tomorrow, but I wasn't sure the best way to start using them.  Should I clone the root files onto the new card?

Should I do a fresh install of ML when I buy the new cards?

Should I un-install ML and re-install it?

I am brand new at this and just want to make sure I do it the right way the first time.

Thanks,

Jon

Via47126

Just downloaded ML on my 70D and the settings in ML only last a couple seconds before it switches back to live view. Anyway of fixing this? Thanks!

Walter Schulz

First page, first post -> What's not working

chmteacher

Crash:

ASSERT: err == SUCCESS
at ./MainCtrl/MainCtrl.c:127, task ?
lv:0 mode:0


Magic Lantern version : Nightly.2015May31.70D111A
Mercurial changeset   : 8a4bc95af250+ (70D-merge) tip
Built on 2015-05-31 07:23:14 UTC by ml@ml-pc.
Free Memory  : 207K + 1594K

nikfreak

[size=8pt]70D.112 & 100D.101[/size]

sergey

In  The  File.DNG  ( received in mode     Silent Picture - maximum resolution )  have over exposure ( very light). 
Not work sunny day  --- (iso100,aperture 2.8 , time  1/100) or  (iso100,aperture 2.8 , time 1/2000)    --  snapshots  identical--very light.
as it should be ?
70D_111A

camslide

Quote from: sergey on July 23, 2015, 08:49:04 AM
In  The  File.DNG  ( received in mode     Silent Picture - maximum resolution )  have over exposure ( very light). 
Not work sunny day  --- (iso100,aperture 2.8 , time  1/100) or  (iso100,aperture 2.8 , time 1/2000)    --  snapshots  identical--very light
Max Shutter Speed is around 1/15. For more information read here:
http://www.magiclantern.fm/forum/index.php?topic=12523.0
70D.112

sergey

70D_111A

can-on

Dear nikfreak, thank ML job.

70D 111A installed, much of the problem is sometimes interrupted freeze the motion detection machine
70 indicates the error, take out battery to place it back again after some time.
Unfortunately, it is not stable
I think there is a lot of work with him, and if time permits would be needed "audio remote"
function would be necessary.
You could then be integrated audio remote ??

thank you

mrpanda

Hello,

nobody knows the answer to my question ?

because I can not find anything on the internet

camslide

Quote from: mrpanda on July 23, 2015, 11:32:21 AM
Hello,

nobody knows the answer to my question ?

because I can not find anything on the internet
Max resolution is 1824x1026. But I can only record for about 6s as the card slot only has a max write speed of 40MB/s and calculated write speed is 74.9MB/s.
70D.112

ShootMeAlready

Camslide, MrPanda

If you want 1080p FHD then I suggest H264, its quite usable with ISO max of 1600 the graininess is under control.  This is also your most ISO friendly for low light shooting.  Once variable bit rate is working fine detail will be more awesome, and once Dual ISO  in video mode is working you will be able to shoot HDR.

If you want to shoot raw, here's some resolutions/recommended use. 
Use an aspect ratio to extend your clip times.  I suggest 2.39 or 2.35 (this is used to master to 2.39).
Use 24fps to extend your clip times, and if you dont like motion blur and want sharpness use a faster shutter (I like to use 1/160s).
Hot pixels (HP) can be a problem as raw clip time extends, check your HP against ISO it varies, but ISO max. of 400 should be clean.
Shadow noise can be a problem in rather low light raw, but 400 ISO max should be clean.  Higher ISO shadow noise appears in low light shots.
This was measured using Sandisk extreme pro 32GB card with 95Mb/s read/ 90MB/s write.

1824 x 776 @ 2.35 / 24fps got 14s.   Good for master shots / pans (90% of 1920 @ 2.35) typically pans are 7s.
1792x762 @ 2.35 /24fps   got 16s.  Good for most dialogue.  Probably very usable for most cut dialogue shots.
1728x736 @ 2.35 /24fps   got 22s. Good for extended dialogue.  Rarely does one talk for 22s in a shot without need for a cut.
1600 x 680 @ 2.35 / 24fps got 62s.  Good for scenes. Wow!  This pretty much is same as continuous as rare to shoot past 30s in a scene.

Now here are some continuous raw resolutions, which is good for documentary shoots or web streaming.
1504x640 @ 2.35 /24fps  is continuous.
720p @ 16:9 /24fps is continuous, and cuts nicely with 720p @16:9 60fps H264 for slow motion frame rate.

Until variable fps is working better, I would suggest avoid the higher 3X zoom resolutions.  Once variable fps is working better, you may be able
to shoot 2k for about 7s clips for what that is worth.   
T3i+ML & 70D.112+ML, Tokina 11-16 2.8, Sigma 18-35 1.8, 50-150 II 2.8, 50 1.4, Canon 28 1.8, 35 2, 85 1.8 "Shoot Wide and Prosper"

camslide

@ShootMeAlready
Thanks for this very informative post! I just wanted to answer the max resolution question from mrpanda.
I will try some of your settings to check whether my SD card is fast enough or if I have to upgrade.
70D.112


can-on

Hi all,

Anyone know when to expect "audio remote" feature ?
and will have refined "motion detection" error 70 about  ?
(111A)

thanks for the answers

tryanbran

Attempted to install ML with the instructions given, this error turned up:

http://i.imgur.com/HjVxGHO.jpg

I tried it with both versions to no avail. I confirmed that all necessary files were present on the SD card prior to hitting the firmware update option, as well as that the SD card was formatted properly in camera.

Card used:

http://www.amazon.com/gp/product/B00I3BQJNA/ref=s9_psimh_gw_p147_d0_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=desktop-1&pf_rd_r=07P7HA62AE5MG0X1JWS0&pf_rd_t=36701&pf_rd_p=2079475242&pf_rd_i=desktop

Any suggestions as to how I can fix this problem?

Walter Schulz

Download file linked in first post, extract them and copy extracted contents to card. If it fails with an error message about version you have to try the other file.