Author Topic: Canon 70D  (Read 2398620 times)

OlRivrRat

  • Hero Member
  • *****
  • Posts: 538
Re: Canon 70D (Alpha5b 23rd April)
« Reply #875 on: April 28, 2015, 08:16:39 AM »
@Austux

        Glad you brought that up. I just tested on mine & it stopped @ 29:59

@Walter Schulz

        There is no mention of the 70D @ http://www.magiclantern.fm/forum/index.php?topic=14644. So maybe a simple Not Yet might have been nice.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8802
Re: Canon 70D (Alpha5b 23rd April)
« Reply #876 on: April 28, 2015, 08:56:36 AM »
You missed to mention if you used H.264 or RAW recording.

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #877 on: April 28, 2015, 04:44:38 PM »
Rev. 111B

Is it nornal that in liveview when I press half shutter button or af-on button the canon date is upper the ML date screen?
70D.112

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #878 on: April 28, 2015, 05:31:04 PM »
Just started using  version 111B, all going well so far.

First (probably obvious) question: how do you get ML menu to stay on without switching back to LV screen after a few seconds? I could not find a setting for this.

Thanks in advance...

I have the same question. If I am on Video Mode or LiveView, the ML MenĂ¹ escape after 5 second.
70D.112

OlRivrRat

  • Hero Member
  • *****
  • Posts: 538
Re: Canon 70D (Alpha5b 23rd April)
« Reply #879 on: April 28, 2015, 05:57:06 PM »
@ Walter Schulz

H.264    & I have Movie Restart On ( It was 1 of the many items I turned on on my 1st trip through the ML Menu)  ~ 

 70D+ML111B
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8802
Re: Canon 70D (Alpha5b 23rd April)
« Reply #880 on: April 28, 2015, 06:21:32 PM »
You may want to point out what is wrong in linked text/thread, so I might be able to add your corrections into my post.

EDIT: Saw your "Movie Restart ON" edit. You used 1080p25 PAL? Have you tried MLV with fps turned to a low value?

nikfreak

  • Developer
  • Hero Member
  • *****
  • Posts: 1197
Re: Canon 70D (Alpha5b 23rd April)
« Reply #881 on: April 28, 2015, 06:48:07 PM »
Rev. 111B

Is it nornal that in liveview when I press half shutter button or af-on button the canon date is upper the ML date screen?

yes, same on 6D. We are only able to hide it while using wheel (keyword: UNAVI).
70D.112 & 100D.101

OlRivrRat

  • Hero Member
  • *****
  • Posts: 538
Re: Canon 70D (Alpha5b 23rd April)
« Reply #882 on: April 28, 2015, 08:07:09 PM »
@Walter Schulz

   Austux asked ~

"Is it possible for Magic Lantern to turn off (or raise, past maybe two hours) the 29min59sec firmware limit on video recording length in the 70D?"

   & it appeared that you responded with ~

http://www.magiclantern.fm/forum/index.php?topic=14644

   I was curious about the link so I went there & found no reference to the 70D. So was trying to point out that it didn't seem that you had

properly answered Austuxs question.

   I then decided to test MovieRestart on my 70D & found that it does not seem to be Working as the Vid' Stopped @ 29:59.

   So here is My version of the question ~ Is Movie Restart supposed to be Working on the 70D-111 A &/or B?

                                 ORR ~ DeanB

ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #883 on: April 28, 2015, 08:21:08 PM »
@OlRivrRat
I have the 70D-111B and the movie not restart after 29:59.
70D.112

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #884 on: April 28, 2015, 08:35:01 PM »
what means (keyword:UNAVI)?
70D.112

Smarty Pants

  • New to the forum
  • *
  • Posts: 15
Re: Canon 70D (Alpha5b 23rd April)
« Reply #885 on: April 29, 2015, 02:22:39 AM »
ok slightly off topic to this ML version but is related  (and not answered on the 1st post)

in the UK we use PAL aka 1080p/720p 25fps
in the US they use NTSC 30fps
(forget 29.97 and 24 etc i'm talking 70D here)

The 70D will not go lower than 1/30 in movie so it's obviously designed for NTSC with a pull down arrangement added for PAL

My question: would we in PAL regions not be better to shoot in NTSC 30fps with 1/30th sec shutter and then pulldown in AE/Premier etc?
I ask as we can get RAW 720p 25 or 30 within SD bandwidth
Even further would be, if shooting for the web why not just stay in a 30fps / 1/30th workflow all the way? (with i7s and SSDs the days of cutting every unneeded frame and Hz aren't worth it any more plus HD means PictureAlwaysLousy and NeverTheSameColour is really all it means now)

anyone done much testing?I ask as is there any point in keeping any PAL/25fps ML settings in a camera that won't shoot at 1/25 or 1/50 etc anyway?

chrisfrancia

  • New to the forum
  • *
  • Posts: 33
Re: Canon 70D (Alpha5b 23rd April)
« Reply #886 on: April 29, 2015, 06:36:14 AM »
@Smarty Pants,

To start to answer your questions I feel it necessary to correct a problem with your selecting of shutter speed. The rule of thumb for shutter speed is double the reciprocal. So for 30 fps the shutter speed would be 1/60. For 25fps the shutter speed would be 1/50 (or closest available option on camera). This is why the 70D shutter will not go under 1/30 in movie mode, not because of a NTSC design (although I can't say for sure the camera is or is not geared toward NTSC)

I also believe, youtube previously converted basically anything that was not 30fps to 30fps itself

As for your actual question,
I believe it is mostly personal preference, if you shoot all your stuff at 25fps you would be able to put your stuff on DVD's and stuff in PAL land and get a almost filmic look on youtube. I believe.

It's mostly a matter of preference as far as I know. After all films are/were typically 24fps but eventually ended up on TV's and other mediums so they ended up being turned into 30fps and look fine so it would be acceptable for you to do the same. However, if you find this 'style', 'jitter', or what not bothers you then technically your best bet is likely 30fps for youtube, even in PAL land, as far as I know.

You should edit and export at whatever framerate you shoot at for youtube. However, you should de-interlace if you happen to be using an interlaced camera (not in the 70D case).

This page will help you.

https://support.google.com/youtube/answer/1722171?hl=en

(Also if the camera is shooting at 29.97, 24.97, or 23.976, you should not round these frame rates off as you will slowly build an audio desync)

Also should discuss this else where as has hardly anything to do with magic lantern in any way
[5D3 1.2.3 ML] [6D 1.1.6 ML]

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #887 on: April 29, 2015, 09:05:57 AM »
rev. 111B

In Live View if I press the Zoom In button the image on display freeze, I try to turn off the camera but the image don't close. The only solution is to pull out the battery.
70D.112

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3413
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Canon 70D (Alpha5b 23rd April)
« Reply #888 on: April 29, 2015, 11:15:55 AM »
*feedbacks*

70D111B Dual-ISO CR2's converted to DNG's is now finally readable in Adobe... Mad Props to @Danne for the command script!







https://vimeo.com/126356593
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #889 on: April 29, 2015, 04:25:00 PM »
rev. 70d-111B

Cropmarks--- Ok in Live View, but in menĂ¹ ML the cropmarks image are not good.
70D.112

nikfreak

  • Developer
  • Hero Member
  • *****
  • Posts: 1197
Re: Canon 70D (Alpha5b 23rd April)
« Reply #890 on: April 29, 2015, 04:52:07 PM »
70D.111A and 70D.111B can contribute following this guide:

http://www.magiclantern.fm/forum/index.php?topic=12375.0

and post in that thread (not in this thread) the vram dumps for 70D.111A and 70D.111B as instructed per above link.
70D.112 & 100D.101

OlRivrRat

  • Hero Member
  • *****
  • Posts: 538
Re: Canon 70D (Alpha5b 23rd April)
« Reply #891 on: April 29, 2015, 06:02:15 PM »
                @Bredy

        LiveView Zooming is working Fine on my 111B ~ However, after returning to No Zoom the Level Indicator is Frozen.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

OlRivrRat

  • Hero Member
  • *****
  • Posts: 538
Re: Canon 70D (Alpha5b 23rd April)
« Reply #892 on: April 29, 2015, 06:28:35 PM »
                @DeadEyeJedi

        "70D111B Dual-ISO CR2's converted to DNG's is now finally readable in Adobe... Mad Props to @Danne!!!"

        For those of us who may be in the dark as to what & who you are referring to here (which may only be me), would you Be So Kind as to

Enlighten Us/Me just a bit ~ Or provide a link to more info ~ Please & Thank You ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3413
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Canon 70D (Alpha5b 23rd April)
« Reply #893 on: April 29, 2015, 06:29:52 PM »
Are you trying to convert Dual-ISO photos (cr2) from 70D, correct?

You on PC or Mac?
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

bredy

  • New to the forum
  • *
  • Posts: 21
Re: Canon 70D (Alpha5b 23rd April)
« Reply #894 on: April 29, 2015, 06:34:51 PM »
I use the standard setting of Canon 70D, magic zoom not active on ML. Every time I press this button I ave the same problem.

Here the crash log:
ASSERT: err == SUCCESS
at GUI.c:684, task PropMgr
lv:1 mode:3


Magic Lantern version : Nightly.2015Apr23.70D111B
Mercurial changeset   : 1ace8a558a3a+ (70D-merge) tip
Built on 2015-04-23 19:29:50 UTC by ml@ml-pc.
Free Memory  : 170K + 1565K

ASSERT: err == SUCCESS
at GUI.c:684, task MainCtrl
lv:1 mode:3


Magic Lantern version : Nightly.2015Apr23.70D111B
Mercurial changeset   : 1ace8a558a3a+ (70D-merge) tip
Built on 2015-04-23 19:29:50 UTC by ml@ml-pc.
Free Memory  : 170K + 1561K

ASSERT: err == SUCCESS
at GUI.c:684, task notifybox_task
lv:1 mode:3


Magic Lantern version : Nightly.2015Apr23.70D111B
Mercurial changeset   : 1ace8a558a3a+ (70D-merge) tip
Built on 2015-04-23 19:29:50 UTC by ml@ml-pc.
Free Memory  : 170K + 1556K

If Magic Zoom is active no problem if i press the zoomin button.
70D.112

garrieta

  • Just arrived
  • *
  • Posts: 1
Re: Canon 70D (Alpha5b 23rd April)
« Reply #895 on: April 29, 2015, 09:03:19 PM »

I just want to know how to record a raw canon 70d firmware version B, ML is installed but not recorded in raw look like, thanks.

OlRivrRat

  • Hero Member
  • *****
  • Posts: 538
Re: Canon 70D (Alpha5b 23rd April)
« Reply #896 on: April 29, 2015, 09:05:06 PM »
@DeafEyeJedi

"Are you trying to convert Dual-ISO photos (cr2) from 70D, correct?"        =    Yes

"You on PC or Mac?"        =    MacPro
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3413
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Canon 70D (Alpha5b 23rd April)
« Reply #897 on: April 30, 2015, 01:32:00 AM »
@OlRivrRat:

You can try @Danne's latest cr2hdr-r beta app which works well on Mac's.

Be sure to read through that thread thoroughly!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

masterhks

  • New to the forum
  • *
  • Posts: 8
Re: Canon 70D (Alpha5b 23rd April)
« Reply #898 on: April 30, 2015, 04:03:24 AM »
What is the maximum stable temperature?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8802
Re: Canon 70D (Alpha5b 23rd April)
« Reply #899 on: April 30, 2015, 05:20:41 AM »