Author Topic: [60D] Err 70 continuous, even in C mode, Log file attached  (Read 10798 times)

BradRWills

  • New to the forum
  • *
  • Posts: 9
[60D] Err 70 continuous, even in C mode, Log file attached
« on: October 10, 2014, 05:00:52 PM »
Hi everyone.
Firstly, thank you for reading this.  It's distressing me quite considerably.  My camera is my source of photos for my very small children, and with it out of action, I am literally missing magic moments right now. 

Let me first point out, that I'm not technical in the least in terms of codes etc - installing Magic Lantern was a stretch for me to get my head around the instructions.  However, the camera has instructed me to send a log file....so here goes:

Fri Oct 10 14:52:21 2014
      0:    11.717 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.784 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.048 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.279 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    13.371 [SEQ] seqEventDispatch (Startup, 0)
      5:    13.393 [STARTUP] startupEntry
      6:    52.149 [PROPST] Initialize Adjective & Situation
      7:    52.482 [HPD] # 1 0 1
      8:    55.388 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    55.812 [PROPST] AEMode New:0 Last:0
     10:    55.898 [PROPST] Active Adjective & Situation
     11:    56.011 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    56.043 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    56.120 [PROPST] Not ExecMultiConvert : Situation 0
     14:    56.177 [PROPST]  CurrentAdjective 0 0
     15:    57.048 [HPD] CreateTask Master End
     16:    58.234 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     17:    58.377 [EM] emSlaveChangeCBR : UILOCK (0x0)
     18:    58.717 [HPD] ERASE SW OFF
     19:   112.149 [STARTUP] startupPropAdminMain : End
     20:   112.231 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     21:   122.783 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     22:   123.309 [PROPST] AEMode New:0 Last:0
     23:   123.668 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     24:   124.146 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     25:   124.219 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     26:   124.769 [SEQ] seqEventDispatch (Startup, 1)
     27:   124.806 [STARTUP] startupPrepareProperty
     28:   125.313 [PRP] MovieParamData
     29:   125.389 [PRP] mode 0 size 0x52 , framerate 0x65 , type 0x73 zoom 0x0
     30:   126.033 [FM] FM_Initialize (0, 1, 0)
     31:   127.110 [FM] fmResultCBR (0x80e304)
     32:   127.988 [FM] PROP_HDD_DCIM_PATH (/)
     33:   128.411 [PROPST] AEMode New:7 Last:0
     34:   128.445 [PROPST] FromSaveTimming = 2(489)
     35:   129.252 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     36:   130.576 [FC] FC_Initialize [drive:3][ClassID:39]
     37:   130.767 [FM] PROP_CARD1_STATUS = 0x1
     38:   130.855 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     39:   130.907 [FM] PROP_CARD1_FILE_NUMBER = 0
     40:   130.985 [FM] PROP_CARD2_STATUS = 0x1
     41:   131.041 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     42:   131.094 [FM] PROP_CARD2_FILE_NUMBER = 3095
     43:   131.161 [FM] PROP_CARD3_EXIST = 0
     44:   131.190 [FM] PROP_CARD3_STATUS = 0x1
     45:   131.233 [FM] PROP_CARD3_RECORD = 0 => 0
     46:   131.263 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     47:   131.302 [FM] PROP_CARD3_FILE_NUMBER = 0
     48:   131.372 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     49:   131.413 [FM] PROP_CARD_EXTENSION = 116
     50:   131.448 [FM] PROP_CURRENT_MEDIA = 2
     51:   131.483 [FM] PROP_USBDEVICE_CONNECT = -1
     52:   131.522 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 3095
     53:   131.556 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     54:   131.648 [FM] PROP_DSDEFINE ModelId 80000287
     55:   131.702 [FM] PROP_FILE_NUMBERING_MODE = 1, 3095
     56:   131.756 [SEQ] seqEventDispatch (Startup, 2)
     57:   131.774 [STARTUP] startupPrepareCapture
     58:   132.338 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     59:   133.535 [RSC] AllocateMemoryUnit For ExMem1
     60:   133.557 [RSC] AllocateMemoryUnit For ExMem1_2
     61:   133.579 [RSC] AllocateMemoryUnit For OnlyMem1
     62:   134.379 [RSC] MemMgr(IMAGE) 0 2
     63:   134.407 [RSC] MemMgr(IMAGE) 0 0
     64:   134.432 [RSC] MemMgr(IMAGE) 0 7
     65:   134.451 [RSC] MemMgr(IMAGE) 0 0
     66:   134.515 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     67:   134.533 [RSC] Deliver PROP_MEMORY_STATUS 3
     68:   135.003 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     69:   135.038 [RSC] hExMem1_2StateObject Through Event 0 State 0
     70:   135.503 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     71:   135.534 [RSC] hExMem1_2StateObject Through Event 4 State 0
     72:   136.208 [RSC] this->dwCardStatus[0] = 0x1(552)
     73:   136.826 [RSC] this->dwCardStatus[1] = 0x1(552)
     74:   137.448 [RSC] this->dwCardStatus[2] = 0x1(552)
     75:   138.048 [RSC] PROP_PC_HDD_STATUS = 0x1
     76:   138.856 [RSC] NO IMAGEFORMAT EstimatedSize.c 69
     77:   138.887 [RSC] NO IMAGEFORMAT EstimatedSize.c 69
     78:   138.918 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     79:   139.866 [RTC] !! RTC CHECK ERROR !!

     80:   141.160 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     81:   141.285 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     82:   141.385 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     83:   141.909 [JOB] InitializeJobClass (ID = 22806, Num = 17)
     84:   142.090 [JOB] [BIND] dcsResultCBR (0x932288)
     85:   142.219 [JOB] PROP_CFN_TAB2 69 49
     86:   143.367 [CERES]  RegisterGPSInfoCallback
     87:   143.823 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     88:   144.504 [JOB] InitializeInnerDevelopJobClass (ID = 22806, Num = 16)
     89:   144.538 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     90:   145.537 [SND] Seq LPC 5-0
     91:   145.574 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
     92:   145.605 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
     93:   145.615 [SND] Seq LPC 5-1
     94:   145.626 [SND] Seq LPC 5-2
     95:   145.665 [SND] Seq LPC 5-3
     96:   145.686 [SND] Seq LPC 5-4
     97:   145.695 [SND] Seq LPC 5-5
     98:   145.706 [SND] Seq LPC 5-6
     99:   146.027 [SND] Seq LPC 5-7
    100:   146.042 [SND] Seq LPC fin
    101:   146.809 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    102:   146.958 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    103:   147.104 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    104:   147.202 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    105:   147.296 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    106:   147.391 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    107:   147.481 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    108:   147.565 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    109:   147.653 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    110:   147.735 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    111:   147.817 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    112:   147.916 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    113:   148.004 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    114:   148.122 [SHTC] scsInit
    115:   149.097 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    116:   154.692 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    117:   154.827 [SHTB] sbsInit
    118:   154.991 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    119:   155.576 [SHTP] spsInit
    120:   155.636 [FM] FM_RegisterSpaceNotifyCallback
    121:   155.728 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    122:   155.760 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    123:   155.784 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    124:   155.818 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    125:   155.840 [FM] FM_RegisterSpaceNotifyCallback
    126:   155.994 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    127:   156.077 [WFT]  TOM_Initialize
    128:   156.600 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    129:   156.747 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    130:   156.853 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    131:   157.270 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    132:   157.398 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    133:   157.425 [EM] Already SW1OFF
    134:   157.512 [MC] cam event metering timer start
    135:   157.613 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    136:   157.705 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    137:   157.783 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    138:   157.875 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    139:   157.956 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    140:   158.039 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    141:   158.126 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    142:   158.540 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    143:   158.615 [TA10] TA10_Initialize : Start
    144:   158.910 [TA10] TA10S_Initialize : Start
    145:   158.935 [TA10] TA10S_Initialize : CreateStageClass
    146:   159.096 [TA10] TA10S_Initialize : End
    147:   159.193 [TA10] TA10_Initialize : End
    148:   159.374 [FM] fmInitialized
    149:   159.470 [FC] _FC_SetDirSuffix (CANON)
    150:   159.526 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 3095)
    151:   159.601 [FM] fmPrepare
    152:   161.142 [FM] ALV_Initialize (36, 25)
    153:   161.485 [FM] fmAllocDcfNo(0x80e0c0)(0x0)
    154:   169.286 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
    155:   169.380 [STARTUP] ERROR ASSERT : Line 108
    156:   169.443 [STARTUP] ERROR ASSERT : FALSE
    157:   169.527 [STARTUP] ASSERT Time 1899/12/31 0:0:0
    158:   189.243 [TERM] terminateChangeCBR : SHUTDOWN (255)
    159:   189.265 [TERMINATE] SHUTDOWN init comp
    160:   189.328 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    161:   189.350 [TERMINATE] Abort init comp
    162:   189.581 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    163:   190.433 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    164:   190.569 [MC] DisplaySensor : 1(0)
    165:   190.960 [MC] PROP_GUI_STATE 0
    166:   191.087 [MC] PROP_LV_ACTION : LV_STOP
    167:   191.169 [MC] PROP_LV_DISPBUSY : not Busy
    168:   191.233 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    169:   191.311 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    170:   191.380 [MC] JobState 0
    171:   191.835 [MC] QRTime : 2
    172:   192.056 [MC] PROP_VARIANGLE_GUICTRL : Enable
    173:   192.291 [MC] regist master CardCover
    174:   192.953 [TA10] ta10_ChangePropCBR ShotsPlan 100 / TotalSheets 100
    175:   193.239 [STARTUP] startupErrorRequestChangeCBR (0x1d)
    176:   193.307 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
    177:   194.071 [PRP] MovieParamData
    178:   194.126 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
    179:   194.181 [PROPST] NTSC->PAL 0 25 12
    180:   194.205 [PRP] fRetry mode 0 size 0x0 , framerate 0x19 , type 0xc
    181:   194.984 [JOB] PROP_CFN_TAB2 0 0
    182:   195.752 [MC] GuiGroundState : 0
    183:   196.031 [MC] PROP_LV_ACTION : LV_STOP
    184:   196.436 [PRP] mode 0 size 0x0 , framerate 0x0 , type 0x0 zoom 0x0
    185:   196.721 [PRP] Deliv WaitID = 0x8000003F, 0xFF02BE84(1)
    186:   196.835 [PRP] Deliv WaitID = 0x8000003F, 0xFF02A10C(2)
    187:   196.919 [TA10] ta10_ChangePropCBR ShotsPlan 2 / TotalSheets 2
    188:   196.986 [PRP] Deliv WaitID = 0x8000003F, 0xFF080794(3)
    189:   198.354 [PRP] Complete WaitID = 0x8000003F, 0xFF02A10C(2)
    190:   198.636 [PRP] Complete WaitID = 0x8000003F, 0xFF080794(1)
    191:   199.666 [PRP] MovieParamData
    192:   199.731 [PRP] mode 0 size 0x0 , framerate 0x19 , type 0xc zoom 0x0
    193:   200.514 [SHTC] Mem1Component Size=0x37a54
    194:   201.184 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
    195:   201.278 [SHTC] scsProperty ID=0x0(0x80)
    196:   201.336 [SHTC] scsProperty ID=0x80040004(0x0)
    197:   201.706 [WFT]  tomSetRawJpgMode (Type = 0x4)
 

Nothing exceptional has happened to my camera between the time it was working, and when it stopped, and I don't think I changed the settings other than the ISO at any point during the day.

I have tried a fresh card
I have tried a new ML card
I've tried without a card, in C and CA mode
I've tried with a lens, with a different lens, without a lens
Twice the camera booted without a card and was controllable in C mode - but when switched off and on again, it showed Err 70 again.

I am using the stable release, and my camera is running 1.1.1 firmware.

Help would not only be massively appreciated, but I will make a donation over and above the donation that I made when I first downloaded ML to help pay for the assistance - it's that important to me to be able to capture these moments with my kids. I don't even mind if that means going back to standard Canon Firmware :(

dmilligan

  • Developer
  • Hero Member
  • *****
  • Posts: 3218
  • 60Da / 1100D / EOSM
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #1 on: October 10, 2014, 06:54:03 PM »
Can you get to the Canon menu in C mode and reset all camera settings?

BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #2 on: October 11, 2014, 12:47:01 AM »
No.  Even on the odd occasion that it did boot, when you go to "Clear all camera settings"  it says something along the lines of "choose any other shooting mode other than "C" to clear all settings.....

 :'(

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #3 on: October 11, 2014, 02:46:38 AM »
Quote
154:   169.286 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
    155:   169.380 [STARTUP] ERROR ASSERT : Line 108
    156:   169.443 [STARTUP] ERROR ASSERT : FALSE

Maybe ram chips failed or have cold solders.

Looks like more people are having the same problem here:
http://magiclantern.fm/forum/index.php?topic=4105.msg131134;topicseen#msg131134

especially after getting their 60D wet.

seems the next thing to try is starting with asserts disabled and reset camera settings?

BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #4 on: October 13, 2014, 02:15:52 PM »
Thanks 1%
Have sent a1ex a PM requesting the appropriate Autoexec.bin files.  Presume that you just replace the autoexec on a card, and let it boot from that, or that if something more technical is required, that A1ex will explain!


BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #5 on: October 14, 2014, 05:08:08 PM »
Haven't heard back from A1ex yet - but just had a look at a couple of other logs...they seem to show the same issue, but on a different line?? 

Is that consistent?  or weird?

Hope A1ex gets his connection issues sorted soon!



Fri Oct 10 16:10:23 2014
      0:    11.700 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.763 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.027 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.267 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    13.350 [SEQ] seqEventDispatch (Startup, 0)
      5:    13.372 [STARTUP] startupEntry
      6:    52.572 [PROPST] Initialize Adjective & Situation
      7:    52.911 [HPD] # 1 0 1
      8:    55.770 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    56.232 [PROPST] AEMode New:0 Last:0
     10:    56.320 [PROPST] Active Adjective & Situation
     11:    56.431 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    56.472 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    56.549 [PROPST] Not ExecMultiConvert : Situation 0
     14:    56.605 [PROPST]  CurrentAdjective 0 0
     15:    57.447 [HPD] CreateTask Master End
     16:    58.603 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     17:    58.743 [EM] emSlaveChangeCBR : UILOCK (0x0)
     18:    59.086 [HPD] ERASE SW OFF
     19:   113.326 [STARTUP] startupPropAdminMain : End
     20:   113.402 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     21:   131.244 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     22:   131.743 [PROPST] AEMode New:0 Last:0
     23:   132.100 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     24:   132.563 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     25:   132.632 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     26:   133.167 [SEQ] seqEventDispatch (Startup, 1)
     27:   133.204 [STARTUP] startupPrepareProperty
     28:   133.773 [PRP] MovieParamData
     29:   133.903 [PRP] mode 0 size 0x0 , framerate 0x19 , type 0xc zoom 0x0
     30:   134.501 [FM] FM_Initialize (0, 1, 0)
     31:   135.602 [FM] fmResultCBR (0x80e304)
     32:   136.490 [FM] PROP_HDD_DCIM_PATH (/)
     33:   136.912 [PROPST] AEMode New:7 Last:0
     34:   136.943 [PROPST] FromSaveTimming = 2(489)
     35:   137.756 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     36:   139.029 [FC] FC_Initialize [drive:3][ClassID:39]
     37:   139.222 [FM] PROP_CARD1_STATUS = 0x1
     38:   139.310 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     39:   139.365 [FM] PROP_CARD1_FILE_NUMBER = 0
     40:   139.474 [FM] PROP_CARD2_STATUS = 0x1
     41:   139.543 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     42:   139.603 [FM] PROP_CARD2_FILE_NUMBER = 3095
     43:   139.670 [FM] PROP_CARD3_EXIST = 0
     44:   139.706 [FM] PROP_CARD3_STATUS = 0x1
     45:   139.746 [FM] PROP_CARD3_RECORD = 0 => 0
     46:   139.779 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     47:   139.813 [FM] PROP_CARD3_FILE_NUMBER = 0
     48:   139.882 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     49:   139.922 [FM] PROP_CARD_EXTENSION = 116
     50:   139.962 [FM] PROP_CURRENT_MEDIA = 2
     51:   140.000 [FM] PROP_USBDEVICE_CONNECT = -1
     52:   140.042 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 3095
     53:   140.078 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     54:   140.179 [FM] PROP_DSDEFINE ModelId 80000287
     55:   140.233 [FM] PROP_FILE_NUMBERING_MODE = 1, 3095
     56:   140.285 [SEQ] seqEventDispatch (Startup, 2)
     57:   140.304 [STARTUP] startupPrepareCapture
     58:   140.868 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     59:   142.033 [RSC] AllocateMemoryUnit For ExMem1
     60:   142.052 [RSC] AllocateMemoryUnit For ExMem1_2
     61:   142.069 [RSC] AllocateMemoryUnit For OnlyMem1
     62:   142.851 [RSC] MemMgr(IMAGE) 0 2
     63:   142.880 [RSC] MemMgr(IMAGE) 0 0
     64:   142.901 [RSC] MemMgr(IMAGE) 0 7
     65:   142.921 [RSC] MemMgr(IMAGE) 0 0
     66:   142.980 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     67:   142.997 [RSC] Deliver PROP_MEMORY_STATUS 3
     68:   143.459 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     69:   143.494 [RSC] hExMem1_2StateObject Through Event 0 State 0
     70:   143.948 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     71:   143.980 [RSC] hExMem1_2StateObject Through Event 4 State 0
     72:   144.666 [RSC] this->dwCardStatus[0] = 0x1(552)
     73:   145.307 [RSC] this->dwCardStatus[1] = 0x1(552)
     74:   145.934 [RSC] this->dwCardStatus[2] = 0x1(552)
     75:   146.537 [RSC] PROP_PC_HDD_STATUS = 0x1
     76:   147.319 [RSC] NO IMAGEFORMAT EstimatedSize.c 69
     77:   147.347 [RSC] NO IMAGEFORMAT EstimatedSize.c 69
     78:   147.384 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     79:   148.313 [RTC] !! RTC CHECK ERROR !!

     80:   150.175 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     81:   150.355 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     82:   150.478 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     83:   151.222 [JOB] InitializeJobClass (ID = 22808, Num = 17)
     84:   151.453 [JOB] [BIND] dcsResultCBR (0x932288)
     85:   151.645 [JOB] PROP_CFN_TAB2 69 49
     86:   153.284 [CERES]  RegisterGPSInfoCallback
     87:   153.817 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     88:   154.708 [JOB] InitializeInnerDevelopJobClass (ID = 22808, Num = 16)
     89:   154.768 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     90:   154.947 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     91:   155.017 [STARTUP] ERROR ASSERT : Line 108
     92:   155.051 [STARTUP] ERROR ASSERT : FALSE
     93:   155.120 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     94:   155.524 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     95:   155.627 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     96:   156.949 [SND] Seq LPC 5-0
     97:   156.993 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
     98:   157.030 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
     99:   157.040 [SND] Seq LPC 5-1
    100:   157.078 [SND] Seq LPC 5-2
    101:   157.117 [SND] Seq LPC 5-3
    102:   157.140 [SND] Seq LPC 5-4
    103:   157.166 [SND] Seq LPC 5-5
    104:   157.178 [SND] Seq LPC 5-6
    105:   157.531 [SND] Seq LPC 5-7
    106:   157.558 [SND] Seq LPC fin
    107:   158.629 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    108:   158.815 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    109:   159.005 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    110:   159.130 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    111:   159.255 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    112:   159.391 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    113:   159.563 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    114:   159.731 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    115:   159.837 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    116:   159.967 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    117:   160.087 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    118:   160.210 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    119:   160.334 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    120:   160.509 [SHTC] scsInit
    121:   161.473 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    122:   167.125 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    123:   167.302 [SHTB] sbsInit
    124:   167.508 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    125:   168.160 [SHTP] spsInit
    126:   168.243 [FM] FM_RegisterSpaceNotifyCallback
    127:   168.355 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    128:   168.387 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    129:   168.435 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    130:   168.475 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    131:   168.492 [FM] FM_RegisterSpaceNotifyCallback
    132:   168.696 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    133:   168.809 [WFT]  TOM_Initialize
    134:   169.598 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    135:   169.785 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    136:   169.911 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    137:   170.505 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    138:   170.895 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    139:   170.930 [EM] Already SW1OFF
    140:   171.053 [MC] cam event metering timer start
    141:   171.204 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    142:   171.344 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    143:   171.482 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    144:   171.604 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    145:   171.735 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    146:   171.859 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    147:   171.982 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    148:   172.569 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    149:   172.663 [TA10] TA10_Initialize : Start
    150:   173.056 [TA10] TA10S_Initialize : Start
    151:   173.120 [TA10] TA10S_Initialize : CreateStageClass
    152:   173.353 [TA10] TA10S_Initialize : End
    153:   173.462 [TA10] TA10_Initialize : End
    154:   173.691 [FM] fmInitialized
    155:   173.791 [FC] _FC_SetDirSuffix (CANON)
    156:   173.876 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 3095)
    157:   174.000 [FM] fmPrepare
    158:   175.607 [FM] ALV_Initialize (36, 25)
    159:   175.973 [FM] fmAllocDcfNo(0x80e0c0)(0x0)
    160:   187.012 [TERM] terminateChangeCBR : SHUTDOWN (255)
    161:   187.038 [TERMINATE] SHUTDOWN init comp
    162:   187.105 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    163:   187.130 [TERMINATE] Abort init comp
    164:   187.314 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    165:   188.141 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    166:   188.266 [MC] DisplaySensor : 1(0)
    167:   188.658 [MC] PROP_GUI_STATE 0
    168:   188.792 [MC] PROP_LV_ACTION : LV_STOP
    169:   188.871 [MC] PROP_LV_DISPBUSY : not Busy
    170:   188.942 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    171:   189.016 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    172:   189.095 [MC] JobState 0
    173:   189.605 [MC] QRTime : 2
    174:   189.833 [MC] PROP_VARIANGLE_GUICTRL : Enable
    175:   190.059 [MC] regist master CardCover
    176:   190.714 [TA10] ta10_ChangePropCBR ShotsPlan 100 / TotalSheets 100
    177:   191.606 [PRP] MovieParamData
    178:   191.664 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
    179:   191.722 [PROPST] NTSC->PAL 0 25 12
    180:   191.747 [PRP] fRetry mode 0 size 0x0 , framerate 0x19 , type 0xc
    181:   192.385 [JOB] PROP_CFN_TAB2 0 0
    182:   193.072 [MC] GuiGroundState : 0
    183:   193.338 [MC] PROP_LV_ACTION : LV_STOP
    184:   193.600 [PRP] mode 0 size 0x0 , framerate 0x0 , type 0x0 zoom 0x0
    185:   195.663 [SHTC] Mem1Component Size=0x37a54
    186:   196.349 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
    187:   196.444 [SHTC] scsProperty ID=0x0(0x80)
    188:   196.506 [SHTC] scsProperty ID=0x80040004(0x0)
    189:   197.058 [PRP] Deliv WaitID = 0x8000003F, 0xFF02BE84(1)
    190:   197.140 [PRP] Deliv WaitID = 0x8000003F, 0xFF02A10C(2)
    191:   197.228 [TA10] ta10_ChangePropCBR ShotsPlan 2 / TotalSheets 2
    192:   197.298 [PRP] Deliv WaitID = 0x8000003F, 0xFF080794(3)
    193:   197.408 [PRP] Complete WaitID = 0x8000003F, 0xFF02A10C(2)
    194:   197.663 [PRP] Complete WaitID = 0x8000003F, 0xFF080794(1)
    195:   198.449 [WFT]  tomSetRawJpgMode (Type = 0x4)
 

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #6 on: October 15, 2014, 03:16:12 AM »
so if you want your camera working you have to compile your own autoexec.bin that turns off asserts, info is right on the forum if you search.

BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #7 on: October 15, 2014, 12:50:36 PM »
All of the info I found (and I've had another look as well!) seems to suggest that the autoexec.bin that would disable the asserts (I have no idea what that means!) is not a commonly available file, and that the only place it is available is via A1ex - and that you should post the issue and logs to make sure that you get the right things switched off....

Have I missed, or misunderstood something? 

Sorry - I'm not even a little bit technical beyond apertures, frame rates, and depth of field I'm afraid!  Just desperate to have my camera back online so that I don't miss out on magic photos and videos of my kids.....


BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #8 on: October 15, 2014, 12:58:05 PM »
Is it possible, that the clock battery is dead in my camera? 

   93:   155.120 [STARTUP] ASSERT Time 1899/12/31 0:0:0

 ::)

BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #9 on: October 15, 2014, 02:23:21 PM »
Have tried gphoto2 - Simply says "*** ERROR *** This camera does not offer any configuration options.
***Error (-6: 'unsupported opration') ***

It sees the camera without issue. 

Also tried Blink test - LED's blink. Hurrah

Guess the next step for me is a modified autoexec.bin - unfortunately I have no idea where to start with that!

BradRWills

  • New to the forum
  • *
  • Posts: 9
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #10 on: October 17, 2014, 02:58:15 AM »
Re-tried Gphoto2 - tried a million different things (finally got the hang of how it works) - but it just won't let me in.

So again, I'm suspecting I need to get hold of an autoexec.bin file with the asserts disabled. 

Can anyone provide me with this, based on the logs above? or point me in the right direction (bearing in mind I'm a photographer, with absolutely no coding or programming experience, so compiling myself is probably dangerous!) ?? 

Another odd thing I've noticed - just before the Err70 flashes up, on the top panel, the display reads the shutter speed as 8000/1 and the aperture at f22.   I've never used a shutter speed that fast!! 

Any help appreciated - I'm pulling my hair out being unable to use my camera!

SidClicks

  • Just arrived
  • *
  • Posts: 1
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #11 on: July 19, 2015, 07:06:33 PM »
Hello Brad,

I am in a similar if not same situation. Wanted to check if you could get your camera back working. A 'Yes' will give me some confidence that I will get my camera back.

Thanks,
Sid.

JFG

  • New to the forum
  • *
  • Posts: 5
Re: [60D] Err 70 continuous, even in C mode, Log file attached
« Reply #12 on: August 18, 2015, 06:34:33 PM »
Hi Guys,

I am wondering if you managed to get your camera working. I am having the same problem with my 60d and I am also looking for a modified version of the autoexec file.

I currently don't have the expertise to compile the file myself. Of course, I am willing to pay if a solution is found.

I also tried the gphoto2 option without success.

I wrote a more detailed message under another post talking about the same subject.

Good luck,

JFG