MLP - Mac OSX batch processing workflow (former cr2hdr-r)

Started by Danne, October 05, 2014, 04:09:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Danne

Cool. Don,t need to separate. I noticed a lut is missing when transcoding duai iso RAW to ProRes which will stop from creating the ProRes. Gonna upload a new version soon with that fixed. Also will refine an issue that stops some other anomalies which occur when the clock goes past 00:00 and transcodes are running. Probably fixed tomorrow.

DeafEyeJedi

Good stuff that you got fixed! These were important...

Standing by for the anticipated 7.3!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

DeafEyeJedi

Thanks for 7.3!!!

Got a bunch of files from 5D3, 70D & M.

Question first before I run it... oddly enough that 5D3 and 70D produced identical file names in both RAW & MLV formats... how do I get around this? Run them separately would be best, right?



lol
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

Yes, separate. If the prefixes are named the same they will get mixed up.
I fixed an issue with dual iso. Don,t know of you notice but will upload when ready.

DeafEyeJedi

Ok, Thanks.

Wouldn't know since I haven't started 7.3 yet - should I wait then?

Also what about combining the MLV audio files from different cameras? Should I rename them if I'm allowed to?
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

Different file names should do. Yes, better wait. I put up too many versions ;)

Danne


DeafEyeJedi

Rendering 7.3b overnight.



Here's to sweet dreams!

p.s. that particular HDR file I mentioned earlier worked out fine on MacMini as soon as I got home. It just takes a long time to spit out ProRes.

*feedbacks*

Sorry couldn't sleep on this one... LOL

https://vimeo.com/127127708

5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

Thanks for feedback.
Any conclusions? Which are the files that are problematic and how? When dual iso lines shows in the middle of the clip it could be it detects the dng as non dual iso.

DeafEyeJedi

Ran 7.5b.


Looks much cleaner and back to what it used to do. =)
https://vimeo.com/127240698

However, I've narrowed down that it was actually the Dual ISO files from EOS-M that did not have the correct aspect ratio (even tho it was shot in normal 24p as all files were) weird?


Not so pretty on the 70D @ ISO 6400 lol...


Thanks again, D!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne


DeafEyeJedi

I think so... Is it normal for HDR files to come out looking like 4:3 when it was shot in 16:9 or 2.35? (Will have to test more HDR files to confirm this though)
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

If shot in raw it corrects ALL files with 1.61x aspect ratio. If you place a MOV file in the folder it doesnt touch aspect ratio.
If you have raw material with correct aspect ratio first convert them in PRORES folder then put the MOV file in hdr folder.

DeafEyeJedi

5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

pistolbeats

does this mean that you wont be able to colorgrade the final raw HDR sequence before its assembled into a MOV??

DeafEyeJedi

Not quite sure actually.

Maybe try placing the RAW HDR file into the ProRes folder first and wait for it to spit out DNG's then you can try and import the DNG's into LR5 AE (ACR) to color grade them and then save them.

Then take that DNG folder you just edited into HDR FOLDER again and run the app once more...

Not sure if that will work but doesn't hurt to try?

Otherwise stand by for his response.

Also do you own any wide angle glass with you to perhaps try Dual-ISO in crop-mode?
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

Best way I believe is to create a flat prores file and then run it in HDR_RAW_MLV_MOV folder. You can use mlrawviewer, PRORES folder or you get a flat look straight in HDR_RAW_MLV_MOV folder so maybe run the file from there from the start. Then you grade the created MOV file in what nle you like and  export the final movie once again.
Creating a flat look in the start will probably lessen the enfuse flickering effect that sometimes occur.
If you want a ready to go look you can achieve this by adding a 3d lut in HDR_RAW_MLV_MOV folder. There are a few provided but otherwise I recommend exporting a mov file and the grab one frame and create a 3d lut in davinci resolve with a desired output look. Then add the 3d lut from start in the folder with raw/mlv files.

Changes to dng files won,t follow to any program but AE and acr so that little lightroom trick won,t work :)
Also, if you run a MOV file in the folder the suffix has to be in capitals MOV, not mov.


DeafEyeJedi

This is why I LOVE AE & ACR...

They make a great couple!

[emoji12]
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

Had to update some things in HDR_RAW_MLV_MOV workflow so first post updated to 7d(will now transcode .mov and .MOV files in HDR_RAW_MLV_MOV folder)

Here are two ways to go about with raw/mlv HDR footage shot in 48, 50, or 60 fps


Here is the contrast lut I,m using in the movie
https://drive.google.com/file/d/0B4tCJMlOYfirMi1RQXNHeXh1Slk/view?usp=sharing
Here is a warmer white balance lut
https://drive.google.com/file/d/0B4tCJMlOYfirMi1RQXNHeXh1Slk/view?usp=sharing




*update
Managed to get this look when adding the contrast lut and a warmer white balance lut. Wb lut download above.


Another go with a few clips. 48 fps 1920, mlv added contrast and wb lut to most of the clips. They,re actually pretty nice.



DeafEyeJedi

Excellent fix regarding .mov/.MOV files...

Should definitely make our lives much easier and great job on getting the HDR section ironed out in 7.5d!

Love how your warm LUTS came out with a bit of contrast -- really nice work, Danne!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne

Updated to 7.6 (First post)

lot of things regarding HDR_RAW_MLV_MOV folder.

- White balance support from an included CR2 still picture
- A folder with contrast and white balance luts will be present in HDR_RAW_MLV_MOV folder with a description(Add a contrast lut for a ready to go look. Add white balance if needed)
- Small fixes

For best quality HDR work with MLV/RAW files and simply add them to the folder. 48, 50, 60 fps are recommended. If no lut is added a log look will be applied.

Happy filming and please share examples if you have any.

Danne


Danne

Some more test shots with HDR :). Still a cool feature.

Developed in HDR_RAW_MLV_MOV folder

shot in:
- RAW 48fps HDR mode iso 100/1600
- added two 3D luts(provided in the HDR_RAW_MLV_MOV folder, no other post work)
02_cr2hdr-r_dan_log_01_warm_+05.cube
03_cr2hdr-r_dan_log_01_to_contrast_01.cube
- Also included a CR2 still picture from location with correct base white balance.















DeafEyeJedi

Simply stunning!!!

Good old classic HDR is still indeed a very cool feature. [emoji3]

Just shot few test HDR shots with both 70D & 5D3.

Will download 7.6 and post results to you shortly.

Thanks again, D!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

Danne