Author Topic: [deprecated] MLVFS windows client (Read 123181 times)

surami · « **Reply #25 on:** September 12, 2014, 05:20:33 PM »

1. Ok, I understand.

2. Well it was because of the cached files, so they were there yet at the playback, thats why it was so smooth.
I write this because now I tested again with random directory swith + random file playback and its not smooth, so it's a cache thing.

g3gg0 · « **Reply #26 on:** September 15, 2014, 02:44:17 AM »

updated:
- reads now MLV and RAW
- shows MLV information tags (LENS, etc) in _info.txt and as virtual files
- less trouble with some older files

mk11174 · « **Reply #27 on:** September 15, 2014, 05:43:21 AM »

Thank you for the RAW support, this will come in handy for the RAW files from bolt trigger!

domidomsen · « **Reply #28 on:** September 15, 2014, 12:55:23 PM »

Hi and thx for the development. I can mount the MLVs but the DNGs are 0kb big. The Log says:

Code: [Select]

[E] 'System.DllNotFoundException: Unable to load DLL 'MlvFsDng.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)' in connection from 127.0.0.1:62572 (HandleContent/HandleRequest)

But the .dll is in the direcory. Maybe somebody can help... THX

Francis Frenkel · « **Reply #29 on:** September 15, 2014, 02:06:40 PM »

Does it mean that with this "tool" I will be able to read my Raw / MLV files directly with Resolve without extracting "Dng's" ?

Francis

dmilligan · « **Reply #30 on:** September 15, 2014, 02:14:21 PM »

Yes! That's the whole point

g3gg0 · « **Reply #31 on:** September 15, 2014, 02:18:42 PM »

@francis:
Yep, just select your cards root folder or your mlv storage directory as root, then map the drive and they appear as directories with jpg and dng.

@domidomsen:
Windows Version, x86 or x64, did you install msvcrt runtime as explained a few posts earlier?

domidomsen · « **Reply #32 on:** September 15, 2014, 02:50:59 PM »

I did not have vcredist_x64.exe installed. I do now. But its still not working. same Error. Its Win7 64bit. Thx

g3gg0 · « **Reply #33 on:** September 15, 2014, 04:07:26 PM »

Thats odd.
Can you try again with the dll from the standard subfolder?

The path where all files are in doesn't contain spaces?

LRF · « **Reply #34 on:** September 15, 2014, 04:51:51 PM »

Short feedback after installation: the tool works (what kind of wizardry is this?

).

Playback in Resolve is choppy in my case - I'd say around 0.5 fps, but it's most likely because of suboptimal hardware platform (i7 920 @2.66, 6GB RAM, W7 64).
Attempt to open MLVs in Premiere ends with "File format not supported" message.

Didn't experience any problems during setup process.
Thanks a lot, g3gg0.

mk11174 · « **Reply #35 on:** September 15, 2014, 05:05:49 PM »

No problems for me on win7 64bit.

g3gg0 · « **Reply #36 on:** September 16, 2014, 02:42:34 AM »

@domidomsen:
please redownload, try and post a log with the exact error message

@all:
i added caching and prefetching.
it should be a bit less choppy now

domidomsen · « **Reply #37 on:** September 16, 2014, 10:07:00 AM »

So, the path had a space. But now it doesnt. But still not working. I also downloaded the newest version. Here is the log:

Code: [Select]

Statistics:
  MLV readers: 3
    D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\M11-2042.MLV: Cached 0 files, 0,00 MiB
    D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\M12-0034.MLV: Cached 0 files, 0,00 MiB
    D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\M11-2354.MLV: Cached 0 files, 0,00 MiB
    Cached toal: 0,00 MiB

[i] WebDAVServer started.
[i] Listening on 0.0.0.0:8082
[i] Root path 'D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\'
[E] 'System.DllNotFoundException: Unable to load DLL 'MlvFsDng.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)' in connection from 127.0.0.1:61151 (HandleContent/HandleRequest)
[E] 'System.DllNotFoundException: Unable to load DLL 'MlvFsDng.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)' in connection from 127.0.0.1:61153 (HandleContent/HandleRequest)
[E] 'System.DllNotFoundException: Unable to load DLL 'MlvFsDng.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)' in connection from 127.0.0.1:61157 (HandleContent/HandleRequest)

LRF · « **Reply #38 on:** September 16, 2014, 11:09:17 AM »

It is faster, indeed, however now I have more skipped (black or blank) frames during timeline playback. Seems that hard drive can't write data fast enough (disks not in RAID).
With previous version there was maybe 4 or 5 black frames in total, now it's like 20% of all.

Again, this comp is far from being an editing machine, so just want to confirm that everything seems to work as intended

g3gg0 · « **Reply #39 on:** September 16, 2014, 11:21:38 PM »

update, added some parameters for cache tuning and removed dependency to MSVCRT.

@domidomsen:
can you try again?

domidomsen · « **Reply #40 on:** September 17, 2014, 09:58:33 AM »

All the same. But at least I have a new error massage:

Code: [Select]

Statistics:
  MLV readers: 2
    D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\M11-2042.MLV: Cached 0 files, 0,00 MiB
    D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\M12-0034.MLV: Cached 0 files, 0,00 MiB
    Cached toal: 0,00 MiB


[i] WebDAVServer started.
[i] Listening on 0.0.0.0:8082
[i] Root path 'D:\MEDIA\2014-Vitali_Video\06_FOOTAGE\02_VIDEO\RAW-ALL\'
[E] 'System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host.' in connection from 127.0.0.1:64611 (HandleContent/HandleRequest)

LRF · « **Reply #41 on:** September 17, 2014, 10:50:17 AM »

I checked the last version and I'm afraid you need feedback from someone with a higher-end editing station, to reach some conclusions.

Now, with default values, I get only flashes of single frames on timeline, the rest is skipped. HD spins like crazy, obviously can't deal with so much data. I didn't try to change the caching parameters, yet.

g3gg0 · « **Reply #42 on:** September 17, 2014, 11:07:35 AM »

@domidomsen:
there are no traces of dll errors, jusdt one socket error.
you are 100% sure that the MlvFsDng.dll is in the same directory as WebDavServer.exe and MLVViewSharp.exe and NAudio.dll?

@LRF:
if you play the second time, is it better?

LRF · « **Reply #43 on:** September 17, 2014, 11:55:21 AM »

I cleaned caches and mounted MLVFS again.
Without render cache in Resolve, it takes 50 seconds to play 10s MLV clip for the first time, 44 secs for the second time. But second play keeps the same omitted frames pattern as the first one. Now it takes long to render frames at the beginning, then more or less in the middle longer black gaps appear, and last third of the clip plays black.

With Smart Render Cache, after waiting for clip to be cached, it takes 22 secs to play it. But again, black or omitted frames seem to appear in the same moments, like when Resolve cache was disabled. Second play looks the same.

domidomsen · « **Reply #44 on:** September 17, 2014, 12:17:12 PM »

Its the same file structure like in the ZIP. I tested it on a friends system. Its the same. 0kb DNGs. Sorry

But his error is different:

Code: [Select]

Statistics:
  MLV readers: 2
    C:\Users\joe\Desktop\100EOS5D\M12-0009.MLV: Cached 11 files, 1,39 MiB
    C:\Users\joe\Desktop\100EOS5D\M12-0007.MLV: Cached 11 files, 1,26 MiB
    Cached toal: 2,65 MiB


[i] WebDAVServer started.
[i] Listening on 0.0.0.0:8082
[i] Root path 'C:\Users\joe\Desktop\100EOS5D\'
[E] Error while browsing /M12-0007.MLV/M12-0007_000002.dng: System.DllNotFoundException, Die DLL "MlvFsDng.dll": Das angegebene Modul wurde nicht gefunden. (Ausnahme von HRESULT: 0x8007007E) kann nicht geladen werden.

Again: Same structure like in the zip.

g3gg0 · « **Reply #45 on:** September 17, 2014, 02:16:56 PM »

can you start it as administrator?
please start a command shell, change into the directory where the dll/exe are and do
"dir /n /r /x /q" and upload a screenshot please.

domidomsen · « **Reply #46 on:** September 17, 2014, 03:29:23 PM »

I started it as Admin.

Here is the screen:

https://www.dropbox.com/s/rpy7xavc7c2jycr/screen.jpg?dl=0

g3gg0 · « **Reply #47 on:** September 17, 2014, 09:10:25 PM »

its getting weird now...

can you try this solution?
basically you have to remove and re-add EXEC permission to the folder where the EXEs are in.

g3gg0 · « **Reply #48 on:** September 17, 2014, 11:08:07 PM »

another update: switched down to .NET 3.5.
maybe it works better on your machines.

do you have some antivirus installed?

domidomsen · « **Reply #49 on:** September 17, 2014, 11:14:44 PM »

Hi G3gg0, I am away till next week. I will check than. Thx for your help.

News:

Author Topic: [deprecated] MLVFS windows client (Read 123181 times)