600D/T3i issue with taking pictures

[covxx]

(Copying and pasting this from reddit post)
Yesterday i was shooting outside and I felt my camera getting really hot so I put it into my bag. Now whenever I take a picture it'll take long to display the photo and the SD card LED wont go away(locks up). I did have ML installed (just uninstalled it) and I formatted both my SD cards but nothing is helping. Considering sending it into repair since its under warranty.

Update: Taking a picture without the lens on makes it go normal, it'll keep saying busy(with or without a card) but with the lens it locks up. Trying to use liveview locks up the camera too(says busy). I cleaned to lens contact with alcohol but didnt help

Now today I reinstalled ML and updated to the lastest nightly and now live view works but when I take a picture this happens.

UPDATE: Live view broke again
Heres what I got from the log

Code Select Expand

Tue Jul  1 01:34:44 2014
      0:     9.221 [STARTUP]
K286 ICU Firmware Version 1.0.2 ( 3.8.3 )
      1:     9.281 [STARTUP]
ICU Release DateTime 2011.11.25 11:00:17
      2:    10.789 [SEQ] seqEventDispatch (Startup, 0)
      3:    10.812 [STARTUP] startupEntry
      4:   109.767 [STARTUP] startupPropAdminMain : End
      5:   109.876 [SEQ] seqEventDispatch (Startup, 1)
      6:   109.906 [STARTUP] startupPrepareProperty
      7:   112.063 [SEQ] seqEventDispatch (Startup, 2)
      8:   112.605 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
      9:   127.522 [JOB] InitializeJobClass (ID = 6039, Num = 16)
     10:   129.025 [CERES]  RegisterGPSInfoCallback
     11:   129.503 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     12:   131.705 [JOB] InitializeInnerDevelopJobClass (ID = 6039, Num = 16)
     13:   131.742 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     14:   133.319 [SND] Seq LPC fin
     15:   135.896 [ENG] [ENGIO](Addr:0x4fb40000, Data:0x   30000)
     16:   142.350 [FM] FM_RegisterSpaceNotifyCallback
     17:   142.487 [FM] FM_RegisterSpaceNotifyCallback
     18:   146.301 [TERMINATE] SHUTDOWN init comp
     19:   146.374 [TERMINATE] Abort init comp
     20:   146.576 [WFT]  PROP_WFT_IMAGE_TRANS (1)
     21:   147.928 [MC] PROP_GUI_STATE 0
     22:   148.166 [MC] JobState 0
     23:   149.002 [MC] PROP_LCD_OFFON_BUTTON : 0
     24:   149.233 [MC] PROP_VARIANGLE_GUICTRL : Enable
     25:   149.471 [MC] regist master CardCover
     26:   153.080 [WFT]  tomSetRawJpgMode (Type = 0x4)
     27:   153.179 [SHTP] spsInit
     28:   752.712 [SD] CARD CAPACITY is 30207Mbyte( 61863936Sec )
     29:   774.978 [SD] SD_GetAccessMode=3
     30:  1182.315 [FSU] WARN _fsuVolDescSet: FSInfo(964720 -> 964721)
     31:  1305.347 [SEQ] seqEventDispatch (Startup, 3)
     32:  1306.123 [STARTUP] startupPrepareDevelop
     33:  1307.813 [PRP] M:50 F:0 L:0 P:1B T:1
     34:  1308.168 [STARTUP] internal version 03:08:03:00:50:00:00:1b
     35:  1309.106 [SHTFD] sdsInit
     36:  1309.407 [SHTRD] sdsInit
     37:  1309.868 [SHTFD] sdsActivate
     38:  1314.321 [SHTRD] sdsActivate
     39:  1317.087 [SHTP] spsActivate
     40:  1328.027 [SHTP] Regist RPC Handler Master ALO
     41:  1389.307 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=30, GOP=15
     42:  1389.422 [MR] mvrChangeAckCBR : Sound Auto(C=2,R=48000,B=16)
     43:  1389.458 [MR] mvrChangeAckCBR : AE_MODE_MOVIE(0)
     44:  1389.474 [MR] mvrChangeAckCBR : ISO(0)
     45:  1389.576 [MR] mvrChangeAckCBR : MOVIE_REC_VOLUME(L:47 R:47)
     46:  1389.638 [MR] mvrChangeAckCBR : WindCut Off
     47:  1397.515 [LV] [GMT] PROP_TEMP_STATUS : STATUS_NORMAL
     48:  1402.714 [HPC] ReserveHPCopySingleChannel (2, 117)
     49:  1402.992 [LV] InitializeLiveViewDefectDetection
     50:  1410.528 [MD] Init RCh1=0, RCh2=0
     51:  1411.108 [MD] Set RCh1=d, RCh2=18
     52:  1411.525 [STARTUP] startupPrepareRemote
     53:  1420.288 [PTP] Not Setting CFn MirrorUpState
     54:  1420.584 [PTP] PhotoStudioMode:0
     55:  1422.676 [PTP] PROP_OPTICAL_CORRECT_PARAM Size:1aeb0 f3c
     56:  1431.685 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     57:  1432.020 [MAC] MAC_Initialize
     58:  1432.442 [MAC] K_BOARDID4
     59:  1432.496 [MAC] K_BOARDID3
     60:  1432.545 [MAC] K_BOARDID2
     61:  1432.578 [MAC] K_BOARDID1
     62:  1432.890 [MAC] Key=0x6 Board=0x651a1a87 Body=0x59000f44
     63:  1433.281 [PTP] PSI DisconnectViewFinder
     64:  1433.540 [PTP] PROP_CONNECT_TARGET (0x0 <= 0x0)
     65:  1433.665 [PTP] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     66:  1434.289 [MAGIC] SetPtpTransportResources:0,3218
     67:  1445.598 [FC] _FC_OpenCatalog : wNumOfDir 1
     68:  1453.388 [SEQ] seqEventDispatch (Startup, 4)
     69:  1453.695 [DP] DP_Initialize()
     70:  1454.561 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     71:  1454.608 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     72:  1454.711 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     73:  1455.136 [DP] PROP_CONNECT_TARGET [0x00000000]
     74:  1455.291 [DP] RD_Cancel No Issue
     75:  1455.665 [DP] [GYO]DpFunctionList[0x10117fff]
     76:  1455.802 [DP] X FreeMem Address[0x00000000]
     77:  1456.224 [INDEV] INDEV_Initialize
     78:  1480.520 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
     79:  1480.634 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
     80:  1502.631 [MR_MOV] (Empty Func) MVW_RegisterXmpDataCallback
     81:  1503.877 [HDMI] HPD OFF
     82:  1503.971 [HDMI] [EDID] dwVideoCode = 0
     83:  1504.021 [HDMI] [EDID] dwHsize = 0
     84:  1504.062 [HDMI] [EDID] dwVsize = 0
     85:  1504.099 [HDMI] [EDID] ScaningMode = EDID_NON_INTERLACE(p)
     86:  1504.135 [HDMI] [EDID] VerticalFreq = EDID_FREQ_60Hz
     87:  1504.165 [HDMI] [EDID] AspectRatio = EDID_ASPECT_4x3
     88:  1504.202 [HDMI] [EDID] AudioMode = 0
     89:  1504.232 [HDMI] [EDID] ColorMode = EDID_COLOR_RGB
     90:  1504.434 [HDMI] DisconnectHDMI : Not Connected
     91:  1506.843 [STARTUP] TotalSizeOfMemory : 0x8b0000 (8896KB)
     92:  1507.037 [STARTUP] GetFreeSizeOfMemory : 0x17eb44 (1530KB)
     93:  1507.218 [STARTUP] GetSizeOfMaxRegion : 0x179834 (1510KB)
     94:  1526.327 WARN [LVDS] First Get DTS_GetAllRandomData
     95:  1528.565 [DP] DP_RegisterCBR() Id=1 Count:12
     96:  1528.623 [DP] DP_RegisterCBR() Id=2 Count:12
     97:  1528.652 [DP] DP_RegisterCBR() Id=4 Count:12
     98:  1535.737 [GUI] MainEventHandler PROP_QR_DIDNOT_EXECUTE(0)(0)
     99:  1537.112 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    100:  1539.593 [SEQ] seqEventDispatch (Startup, 5)
    101:  1539.623 [STARTUP] startupInitializeComplete
    102:  1539.755 [MC] cam event guimode comp. 0
    103:  1542.501 [FA] ChangeCBR(ID=0x8003000a)
    104:  1544.918 [FA] RequestFromCheckData
    105:  1545.401 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    106:  1552.882 [SEQ] seqEventDispatch (Startup) : End
    107:  1582.423 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    108:  1583.827 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=30, GOP=15
    109:  1585.430 [MC] cam event guimode comp. 0
    110:  1590.514 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=30, GOP=15
    111:  1602.198 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(1)
    112:  1625.227 WARN [LVDS] First Get DTS_GetAllRandomData
    113:  1626.010 [LV] [PATH] GetPathDriveInfo[0]
    114:  1626.361 WARN [LVDS] First Get DTS_GetAllRandomData
    115:  1626.834 WARN [LVDS] First Get DTS_GetAllRandomData
    116:  1629.227 [CAPD] ImagePowerOn
    117:  1629.453 WARN [LVDS] First Get DTS_GetAllRandomData
    118:  1629.554 WARN [LVDS] First Get DTS_GetAllRandomData
    119:  1639.067 WARN [LVDS] First Get DTS_GetAllRandomData
    120:  1709.816 WARN [LVDS] First Get DTS_GetAllRandomData
    121:  1709.896 [LV] [EVF] ShootingMode(2), FrameRate(5)
    122:  1709.925 [LV] [EVF] Flicker Detect!!!
    123:  1756.109 [LV] [PATH] GetPathDriveInfo[0]
    124:  1801.351 [LV] [EVF] Flicker Detect!!!
    125:  1823.668 [LV] [EVF] Flicker Detect!!!
    126:  1841.057 [FC] fcmcOpenMetaCtg : Cancel! I'll be back. <After UnLock>
    127:  1868.096 [WINSYS] Zlib maxsize update 884
    128:  1868.163 [WINSYS] Zlib maxsize update 1396
    129:  1869.094 [LV] [EVF] Flicker Detect!!!
    130:  1914.526 [LV] [EVF] Flicker Detect!!!
    131:  1947.044 [LVCDEV] DF 43Hz:   0 50Hz:   0 60Hz:   0 74Hz:   0
    132:  1959.979 [LV] [EVF] Flicker Detect!!!
    133:  2005.418 [LV] [EVF] Flicker Detect!!!
    134:  2036.671 [LVCDEV] DF 43Hz:   1 50Hz:   1 60Hz:   6 74Hz:   0
    135:  2050.849 [LV] [EVF] Flicker Detect!!!
    136:  2096.283 [LV] [EVF] Flicker Detect!!!
    137:  2129.189 [LVCDEV] DF 43Hz:   1 50Hz:   0 60Hz:   0 74Hz:   0
    138:  2141.740 [LV] [EVF] Flicker Detect!!!
    139:  2187.181 [LV] [EVF] Flicker Detect!!!
    140:  2218.308 [LVCDEV] DF 43Hz:   1 50Hz:   4 60Hz:   0 74Hz:   0
    141:  2232.617 [LV] [EVF] Flicker Detect!!!
    142:  2278.058 [LV] [EVF] Flicker Detect!!!
    143:  2311.374 [LVCDEV] DF 43Hz:  15 50Hz:   7 60Hz:   6 74Hz:   0
    144:  2311.512 [LVCDEV] Flicker Detect Complete:0
    145:  2348.954 [LV] [PATH] GetPathDriveInfo[10]
    146:  2731.028 [DISP] Enable Pb 1 (2149)
    147:  2857.031 [DISP] TurnOnDisplay finish Type=0


[a1ex]

Here you can find a tool to get a detailed error log: http://magiclantern.fm/forum/index.php?topic=12374.msg119446#msg119446

[covxx]

grabbed this http://pastebin.com/2MhVMJiWafter taking a picture and going into live view, its long. Thanks

[a1ex]

It doesn't contain any error. Did it work fine this time?

At least this line suggest the image was captured correctly:

     ShootCapture:ff2df5c8:92:05: ObInteg : 2042, 2041, 2052, 2051

[covxx]

This is strange, no it 'freezes' on trying to write it to the SD card. If I turn the camera off it'll stay recording image until I take out the battery

[covxx]

So I can write read  the SD card with a ml benchmark

and write now. So if it can write and read the SD card via ML it cant be hardware right, i mean it is saying the image was captured correctly

Strangely when I try to do the 5 min test itll shut off a little bit into it

new log (https://github.com/CovXX/random/)

[kihlbahkt]

Sounds frustrating. Maybe it is in need of repair. Ive been running ML on my 600Ds since 2012 and never came across this weirdness.

What about video mode?
Other lenses?
Start without ML (hold SET)?
Cycle thru Modes (Av,Tv,M, etc)?

That is all  can think of that you might try. The screen may be defective or maybe the lens circuitry is roached. Good Luck.

[Walter Schulz]

Strangely when I try to do the 5 min test itll shut off a little bit into it

You may want to look after your cam's "Auto power off" option. ML will just shut down if this timeout runs off.

[covxx]

So very overdue update but I had gotten a replacement body from Cannon and put this one away, after a few months I randomly tired turning it on and it worked without issues. Incase someone runs into this.