Author Topic: Canon 5D Mark II / 5D2 (Read 844555 times)

Walter Schulz · « **Reply #725 on:** March 26, 2019, 11:19:54 PM »

https://www.pel.hu/eoscard/

aaalexi · « **Reply #726 on:** March 31, 2019, 03:54:43 PM »

Help：XXX is not possible in current mode ， Max 0
Hi，lovely guys in the forum~
I'm a totally rookie in M L
just picked up my old 5DII and tried to take some RAW videos，
but I found that the MLV function can not work，
I can't select any resolution，even the lowest 640 ， and it said （640 is not possible in current mode，max 0）
The CF card is Sandisk Ultra 16GB 50M/S, It's an old card and I know that speed is not so fast,
but I did the speed test,write 48mb/s, read 75mb/s，
I thought maybe the card supports the lowest resolution，right？
or，is there something wrong with the camera body？
Help me please！！！

Walter Schulz · « **Reply #727 on:** March 31, 2019, 07:24:59 PM »

In Canon menu set video resolution 1080p.
In movie mode, press magnify button 5x. Enter ML menu and adjust a rather low resolution there.
Retry.

aaalexi · « **Reply #728 on:** March 31, 2019, 07:36:07 PM »

Quote from: Walter Schulz on March 31, 2019, 07:24:59 PM

In Canon menu set video resolution 1080p.
In movie mode, press magnify button 5x. Enter ML menu and adjust a rather low resolution there.
Retry.

Thanks for the reply Sir！I tried those steps you said ，and it still max 0..........

Walter Schulz · « **Reply #729 on:** March 31, 2019, 07:41:23 PM »

There is a snapshot option in Debug tab. Gives you 10 seconds after selecting it to browse to a menu. It will generate a VRAMx.PPM file. Convert to JPEG/PNG, upload them somewhere an link here.
Show
Module screen
Movie screen
MLV submenu with resolution setting visible.

aaalexi · « **Reply #730 on:** March 31, 2019, 07:54:54 PM »

Quote from: Walter Schulz on March 31, 2019, 07:41:23 PM

There is a snapshot option in Debug tab. Gives you 10 seconds after selecting it to browse to a menu. It will generate a VRAMx.PPM file. Convert to JPEG/PNG, upload them somewhere an link here.
Show
Module screen
Movie screen
MLV submenu with resolution setting visible.

Thank you again Sir! and the are the snapshots

aaalexi · « **Reply #731 on:** March 31, 2019, 07:57:23 PM »

Quote from: Walter Schulz on March 31, 2019, 07:41:23 PM

There is a snapshot option in Debug tab. Gives you 10 seconds after selecting it to browse to a menu. It will generate a VRAMx.PPM file. Convert to JPEG/PNG, upload them somewhere an link here.
Show
Module screen
Movie screen
MLV submenu with resolution setting visible.

oops ,why the snapshots didn't show... here are the links https://imgur.com/N4CQuDI https://imgur.com/3UGT38x https://imgur.com/vMh7GrA https://imgur.com/SxUIkra

Walter Schulz · « **Reply #732 on:** March 31, 2019, 08:03:02 PM »

You have to enter movie mode to record movies ...

aaalexi · « **Reply #733 on:** March 31, 2019, 08:07:29 PM »

Quote from: Walter Schulz on March 31, 2019, 08:03:02 PM

You have to enter movie mode to record movies ...

module screen and liveview screen https://imgur.com/F5ZwQqB https://imgur.com/VIAE0nF
what??? movie mode??? what I understand the movie mode is in the liveview then you could press set to take the movie.....
what I understand is wrong for so many years?? LOL....
and how to turn on the movie mode??? Please~

aaalexi · « **Reply #734 on:** March 31, 2019, 08:12:41 PM »

Quote from: Walter Schulz on March 31, 2019, 08:03:02 PM

You have to enter movie mode to record movies ...

Sir,are you still there?? help me please!

aaalexi · « **Reply #735 on:** March 31, 2019, 08:21:06 PM »

Quote from: Walter Schulz on March 31, 2019, 08:03:02 PM

You have to enter movie mode to record movies ...

Oh, I fonud the answer,In the Liveview function settings I didn't select that "Movie display" ,so many years I never learn whats different about those selections.....Im a totally idiot!!LOL!
at last, thank you soooooo much for the help sir! god bless you!

Macke1 · « **Reply #736 on:** April 15, 2019, 10:29:15 PM »

hi, is there anyone who knows which button fixes autofocus when filming, i can´t find the button?! or is it only manualfocus?! it worked on my 700d?!

theBilalFakhouri · « **Reply #737 on:** April 15, 2019, 10:57:03 PM »

@Macke1

Why not to ask on 700D thread?

Not sure, but maybe disabling "small hacks" under mlv_lite submenu it will fix Autofocus when shooting RAW video, try and feedback please.

The autofocus is working while shooting H.264 right? You are talking about RAW video in none crop mode ? If not maybe you should adjust autofocus settings from Canon menus, and as far as I know the autofocus doesn't work in x5 mode.

Macke1 · « **Reply #738 on:** April 15, 2019, 11:04:02 PM »

sorry, im on 5d markii and shooting mlv, i will try this and come back

reddeercity · « **Reply #739 on:** April 16, 2019, 07:53:39 AM »

I don't use auto focus , but if I remember right auto focus only works before you record raw video no while recording (raw video that is) .

OlRivrRat · « **Reply #740 on:** April 16, 2019, 10:01:22 PM »

RedDeerCity Is correct > 5D2 does not have Full Time AF during Vid' Rec' ~

70D was the 1st EOS DSLR able to do that ~

marcelolippi · « **Reply #741 on:** April 21, 2019, 10:12:53 AM »

hi guys, i would like to understand what is the latest experimental build for the 5dmk2. I have installed the February version of reddeercity but all the modules give error as soon as I restart the cam. Tips?

masc · « **Reply #742 on:** April 21, 2019, 10:18:23 AM »

Quote from: marcelolippi on April 21, 2019, 10:12:53 AM

hi guys, i would like to understand what is the latest experimental build for the 5dmk2. I have installed the February version of reddeercity but all the modules give error as soon as I restart the cam. Tips?

Read first post of the thread of reddeercity carefully and do exactly what he wrote, then you won't get errors.
Otherwise download one of the latest nightly builds, or 10/12bit experimentals from download section.

marcelolippi · « **Reply #743 on:** April 22, 2019, 08:02:46 AM »

I succeeded, thanks for the advice, Redeercity changed the resolution of the crop, I can't find the resolution 28xx, anyway the visualization problems are many, I use eosm too and I was looking for a similar setting to the version of Danne.

Macke1 · « **Reply #744 on:** April 23, 2019, 09:38:59 PM »

Hey! I saw a video about crop mode. There shutter speed went down from 50 to lower. Can't find the instructional movie now. I can no longer see crop mode in the magic lantern menu. Does it still work? I film and press magnification 5x. ??! please help. I have canon markii and the latest ML

Walter Schulz · « **Reply #745 on:** April 23, 2019, 10:04:48 PM »

Quote from: Macke1 on April 23, 2019, 09:38:59 PM

I have canon markii and the latest ML

Fine, no link to video. So what are we talking about? Does "no longer see" mean you had a version where it was?
Have you tried to press the magnify button and adjusting resolution before record start?
And which is the latest ML?
- magiclantern-Nightly.2018Jul03.5D2212.zip
- magiclantern-lua_fix.2019Mar20.5D2212.zip
- magiclantern-raw_video_10bit_12bit.2019Mar24.5D2212.zip
- magiclantern-crop_rec_4k_mlv_snd_experiments_waza57.2019Mar22.5D2212.zip
- 2.6k_5d2_R_T_PreView_4-7-2019_crop_rec.rar

Macke1 · « **Reply #746 on:** April 23, 2019, 10:10:17 PM »

sorry, i saw the video last evening, but can't remember where in the forum, i will try another search, sorry to bother you. latest nightly build for my camera

Macke1 · « **Reply #747 on:** May 02, 2019, 10:53:11 PM »

i cant find the latest try out, experimental for filming crop mode 3x? can someone help please. is it this - magiclantern-crop_rec_4k_mlv_snd_experiments_waza57.2019Mar22.5D2212.zip

gzhjb · « **Reply #748 on:** May 06, 2019, 12:01:07 PM »

Hi everyone, I just bought my Canon 5D Mark II this year 2019. Yes, in 2019.

I tried the latest version of ML on my 5D Mark II but failed.

After reading some posts, I noticed that many people succeeded with "magiclantern-Nightly.2016Feb24.5D2212.zip". So I did installed this version on my 5D Mark II. Happily I found it working all good, at least it is able to shoot at RAW format now.

Hope this can help some new comers.

You can easily find this version on the download page and dig in a little bit on the old versions.

Or you can use this link, it is exactly the same address as I mentioned.

https://builds.magiclantern.fm/jenkins/job/5D2.212/391/artifact/platform/5D2.212/magiclantern-Nightly.2016Feb24.5D2212.zip

Happy ML.

OlRivrRat · « **Reply #749 on:** May 06, 2019, 04:49:19 PM »

      @gzhjb

   "I tried the latest version of ML on my 5D Mark II but failed."

Please give the Name of Which Version Failed & Better Details of the Failure.

                     ORR ~ DeanB

News:

Author Topic: Canon 5D Mark II / 5D2 (Read 844555 times)