Author Topic: Canon 5D Mark III / 5D3 / Firmware 1.2.3 (Read 1041942 times)

olofen · « **Reply #1550 on:** September 08, 2018, 11:14:39 AM »

Is it possible to use DualIso in conjunction with the experimental set-up with 45 fps and 1920x1080? How do you go about? How do you set it all up in the camera?

echassiersauteur · « **Reply #1551 on:** October 04, 2018, 07:38:30 AM »

Hello,

i'm new here from france (sorry for my english...)

I'm really interested to install magik lantern on my 5d mark iii but i've got some problems...

I've got the firmware 1.3.5 and i cannot downgrade to 1.3.4 or 1.2.3 (wich i need for ML)

I tried with SD card, i tried with EOS utility 3 but it doesnt work.
Finally i saw on the net that i need EOS utility 2 but impossible to install on my windows or mac computers.... Don't know why...

Who could help me please ?

KR

echassiersauteur · « **Reply #1552 on:** October 04, 2018, 08:22:15 AM »

I finally succeed to downgrade until 1.3.3 but cannot go to the 1.2.3 for Magik lantern ... Any ideas ?

Walter Schulz · « **Reply #1553 on:** October 04, 2018, 09:43:58 AM »

https://www.magiclantern.fm/forum/index.php?topic=18941

Tyronetheterrible · « **Reply #1554 on:** February 09, 2019, 07:11:55 PM »

Sorry if this question seems ignorant, but what is the highest widescreen resolution (16:9, 2:35, 2:39) one can achieve with the crop_rec module in 14-bit lossless, continuous 24fps, while having the LiveView fully functioning during recording?

timbytheriver · « **Reply #1555 on:** March 07, 2019, 12:52:20 PM »

Just testing my new 5D3 with the 4K / lossless compression Experimental build Jul22.2018

I'm trying to get 45fps as described in the build notes: "1920x1080 @ 45p and 48p (3x3 binning)…Continuous:…1920x1080 @ 45p"

Closest I can get (15ish seconds run) is 1920 x 818 (2.35:1) or 1456 x 820 (16:9) on a Lexar 1066x 128gb. Have tried various combinations of Global draw on/off; Video Previews; Sound off. Nothing seems to hit the stats in the notes.

Could someone suggest some tweaks please?

Many thanks

Tim

DeafEyeJedi · « **Reply #1556 on:** March 08, 2019, 12:31:50 AM »

Are you recording into SD or CF card @timbytheriver?

timbytheriver · « **Reply #1557 on:** March 08, 2019, 09:02:50 AM »

@DeafEyeJedi

Hiya!

Record into CF card. (Lexar 1066x 128gb) I have ML on SD card.

Danne · « **Reply #1558 on:** March 08, 2019, 09:41:12 AM »

You could test this build:
https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Feb14.5D3113.zip

version 1.2.3
https://bitbucket.org/Dannephoto/magic-lantern/downloads/crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Feb15.5D3123.zip

It gives 48fps in 1920x1080p. For continuous you do following:
1 - In RAW video keep 14bit lossless
2 - Head over to Crop mode sub menu and change bitdepth to 10bit. (Preview will probably look a bit greenish but files recorded will look good)

timbytheriver · « **Reply #1559 on:** March 08, 2019, 09:48:59 AM »

@Danne

Many thanks!

Does that build include all the other modules from the build Jul22.2018 from the 'Experimental' page?

timbytheriver · « **Reply #1560 on:** March 08, 2019, 10:03:53 AM »

@Danne

That build was for 1.1.3! I got a message warning me about it as soon as I put it in the camera!

Is there one for 1.2.3?

Danne · « **Reply #1561 on:** March 08, 2019, 10:25:36 AM »

Updated my post with both versions

timbytheriver · « **Reply #1562 on:** March 08, 2019, 10:31:21 AM »

@Danne

Great stuff - many thanks! Will test…

timbytheriver · « **Reply #1563 on:** March 08, 2019, 10:54:59 AM »

@Danne

Not sure I'm setting this up correctly. I'm getting about 8 secs (red box from the start) @ 45fps 1920x1080 (Canon menu 1280x720 50fps PAL)

Am I missing something?

Danne · « **Reply #1564 on:** March 08, 2019, 11:01:00 AM »

Set to ntsc for 48fps I think.
I think I got contnuous this way. You might have a bad card. You can check your card against benchmark.mo. Just get that module from any other build.

timbytheriver · « **Reply #1565 on:** March 08, 2019, 11:24:19 AM »

@Danne NTSC/60fps produced lots of code errors and stopped immediately. Set back to PAL.

Are these benchmarks ok?

Walter Schulz · « **Reply #1566 on:** March 08, 2019, 11:32:14 AM »

Do you have a decent cardreader connected with USB 3.x? Use CrystalDiskMark (Windows) or BlackMagic Disk Speed Test (macOS) to verify card speed. Seems a bit slow ...
BTW: Benchmark run writes a BENCHx.PPM file to card's root. You may convert it to PNG to avoid second cam.

Which numbers do you get with plain nightly build in photo mode?

timbytheriver · « **Reply #1567 on:** March 08, 2019, 11:58:39 AM »

@Walter Schulz Thanks!

Fast card reader/usb 3.0 using Benchmark app gave these results:

Results   55.41

   System Info
      Xbench Version      1.3
      System Version      10.11.6
      Physical RAM      8192 MB
      Model      iMac17,1
      Drive Type      Multi-Reader -0

   Disk Test   55.41
      Sequential   99.17
         Uncached Write   95.75   58.79 MB/sec [4K blocks]
         Uncached Write   92.23   52.19 MB/sec [256K blocks]
         Uncached Read   66.23   19.38 MB/sec [4K blocks]
         Uncached Read   253.11   127.21 MB/sec [256K blocks]
      Random   38.44
         Uncached Write   11.05   1.17 MB/sec [4K blocks]
         Uncached Write   88.99   28.49 MB/sec [256K blocks]
         Uncached Read   1366.83   9.69 MB/sec [4K blocks]
         Uncached Read   632.02   117.28 MB/sec [256K blocks]

Do these look suspect?

Can't see the BENCHx.ppm file anywhere on CF or SD card.

Walter Schulz · « **Reply #1568 on:** March 08, 2019, 12:05:19 PM »

That's a bit slow for a 1066x card. Sequential write should be between 115 and 156 MByte/s with a cardreader supporting UDMA-7. Maybe it's you mac/cardreader combination...
The file you are looking for is named BENCH0.PPM or BENCH1.PPM or Bench2.PPM ...
Run another benchmark with plain nightly build in photo mode and report back.

timbytheriver · « **Reply #1569 on:** March 08, 2019, 12:13:14 PM »

@ Walter Schulz Thanks for looking that over. I guess I'd better contact the seller (Amazon) for a replacement.

https://www.cameramemoryspeed.com/reviews/cf-cards/lexar-professional-1066x-128gb-cf-card/

"The Lexar Professional 1066x 128GB CompactFlash card offers high performance and large capacity. It supports UDMA-7 and it rated at 160MB/s read and 155MB/s write speeds according to Lexar. The large capacity is ideal for video recording, and it carries the Video Performance Guarantee rating of VPG-65, meaning the card will sustain at least 65MB/s continuous write speed."

Is that figure of 65MB/s quoted the one the ML bench test is giving (61MB/s in my case)?.

No .ppm files anywhere to be seen!

Walter Schulz · « **Reply #1570 on:** March 08, 2019, 12:21:05 PM »

Is it to much asked for another benchmark run in photo mode with plain nightly build instead of jumping to conclusions?

timbytheriver · « **Reply #1571 on:** March 08, 2019, 12:26:14 PM »

@Walter

I don't quite understand "run in photo mode". What's the correct procedure for running the ML benchmark test?

I've been testing the card for some days; in various builds using 45/48fps and am getting nowhere near what others are achieving in record times. I wouldn't say I'm jumping to conclusions…

Walter Schulz · « **Reply #1572 on:** March 08, 2019, 12:30:43 PM »

Your cam has two modes: Photo/stills and movie/video and there is a switch right to the eye-piece with respective symbols. Do not enter liveview in photo mode for this benchmark run.

Danne · « **Reply #1573 on:** March 08, 2019, 12:35:24 PM »

Is mv720p or mv1080p also affecting benchmark results? If so set it to mv1080p when testing as well.

timbytheriver · « **Reply #1574 on:** March 08, 2019, 12:54:50 PM »

@Walter Thanks! Do these look more healthy? Now I have the .ppm files…

@Danne Thanks!

News:

Author Topic: Canon 5D Mark III / 5D3 / Firmware 1.2.3 (Read 1041942 times)