Author Topic: Canon 5D Mark III / 5D3 / Firmware 1.2.3  (Read 1046210 times)

dalifen

  • New to the forum
  • *
  • Posts: 10
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1400 on: July 06, 2016, 11:59:33 AM »
Well yes, it's pity for me, I'd appreciated it a lot, but unlike the homepage picture, perfectly clear info from you. Thanx.

Btw. I've got another question, should be in 5D2 forum correctly, but I believe You know the answer. When monitoring sound during live view on 5D2 I only hear left channel, is it a problem of my very camera, or it's normal and I mis a cable with some special wiring? (rca to phone jack adapter or a sesscom cable - don't have clu what is it)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6834
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1401 on: July 06, 2016, 12:03:17 PM »
Sorry, please switch to 5D2 thread after consulting search function.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

dalifen

  • New to the forum
  • *
  • Posts: 10
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1402 on: July 06, 2016, 12:08:58 PM »
OK, I see.
Anyway thanks to everybody behind this sweet piece of software, I appreciate it a lot.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12277
  • Emergencies only
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1403 on: August 23, 2016, 10:38:01 PM »
Synced the source code to main builds, so a new nightly should appear soon.

Please note the build is untested, so you should probably wait for feedback from early testers before upgrading.

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3228
  • 5D3 / M1 / 7D / 70D / SL1 / M2
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1404 on: August 23, 2016, 10:38:48 PM »
Looking forward to it. Thanks @a1ex!
5D3.113 • 5D3.123 • EOSM.203 • 7D.203 • 70D.112 • 100D.101 • EOSM2.*

chris_overseas

  • Moderators
  • Member
  • *****
  • Posts: 222
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1405 on: August 23, 2016, 11:26:57 PM »
Please note the build is untested, so you should probably wait for feedback from early testers before upgrading.

Thanks a1ex. So far so good with this build. ML menus all work fine, and I haven't noticed any problems with what I've tried (briefly) so far: dual-ISO, auto ETTR, advanced bracketing, silent pictures, various global draw features. I haven't tried any video features.
5D Mark IV 1.1.2 | 5D Mark III v1.2.3 | Canon 16-35mm f4.0L | Tamron SP 24-70mm f/2.8 Di VC USD G2 | Canon 70-200mm f2.8L IS II | Canon 100-400mm f4.5-5.6L II | Canon 800mm f5.6L | Canon 100mm f2.8L macro | Sigma 14mm f/1.8 DG HSM Art | Yongnuo YN600EX-RT II

PoVid

  • New to the forum
  • *
  • Posts: 4
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1406 on: August 25, 2016, 12:42:58 AM »
Just wondering in the newest 1.2.3 nightly (8-23-2016) if debug logging is disabled in mlv_rec again?

Reason I ask, is in reference to reply #1386, it seems that may have been the problem for corrupt frames.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6834
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

beauchampy

  • Senior
  • ****
  • Posts: 302
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1408 on: August 25, 2016, 10:58:53 AM »
BIG thanks to a1ex and everyone else who made this new 123 build happen  :)
Clean HDMI is really important to some of us, so this is gratefully received!

WGT

  • Just arrived
  • *
  • Posts: 1
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1409 on: August 25, 2016, 11:32:42 PM »
Dear All,

Does Magic Lantern offer a possibility to record voice tags? I tried to find such a functionality but was not successful.

Thx in advance,
WGT


Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6834
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

tron

  • Member
  • ***
  • Posts: 162
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1411 on: August 26, 2016, 11:53:40 AM »
Many thanks to a1ex and everyone who contributed on this  :)

unfilmde

  • New to the forum
  • *
  • Posts: 42
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1412 on: August 26, 2016, 11:06:06 PM »
And now the 5D Mark IV.  What would ML do with 4K - non-cropped video RAW ;

noipego

  • New to the forum
  • *
  • Posts: 38
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1413 on: August 27, 2016, 02:12:26 PM »
there is already 5d4 discussion in the general chat...as for the new build many thanks...recorded 1T at 1080/ 24&25 fps and everything looks good. Ill do my tests at higher fps and cropped modes later

dratif

  • New to the forum
  • *
  • Posts: 33
  • The Atif Films
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1414 on: August 31, 2016, 06:27:43 PM »
And now the 5D Mark IV.  What would ML do with 4K - non-cropped video RAW ;

I think Canon is giving Jpegs. And we need RAW, I hope Team ML will stand and deliver again to the challenge.
5D3 | SanDisk 64GB 160- KB 64GB 1066x | Canon 24-105mm 4L | Canon 70-300mm IS USM | Rokinon 85mm 1.5 | Nikon 50mm 1.4 | Nikon 28mm 2.8 | Tascam DR-60 Mk2 | Audio Tech. AT 8024 | MS7701B Boom | Aputure H198C | Monitor FreeWorld FW-759 | Tripod Oben AC-1341 | Head PH-368 | Slider SLD-31 | MBP 2015 mid

KenshirouX

  • New to the forum
  • *
  • Posts: 37
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1415 on: September 13, 2016, 05:52:27 AM »
Quote
there is already 5d4 discussion in the general chat...as for the new build many thanks...recorded 1T at 1080/ 24&25 fps and everything looks good. Ill do my tests at higher fps and cropped modes later

Direct link for the 5Dmk4 discussions, please?  I can't find it.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6834
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

blitzkrieg666

  • New to the forum
  • *
  • Posts: 11
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1417 on: September 14, 2016, 05:47:48 AM »
With the Nightly.2016Aug24.5D3123 build, rec.led.off = 1 doesn't work any more?
Adding this line to magic.cfg doesn't work, red LED still blinks when recording.
Anything I'm missing?

blitzkrieg666

  • New to the forum
  • *
  • Posts: 11
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1418 on: September 14, 2016, 06:52:24 AM »
whoops just saw #48 in https://builds.magiclantern.fm/jenkins/job/5D3.123/45/

It says old hackish implementation, doesn't seem to work anyway. Well, it worked fine for me on the previous 2015Dec20.5D3123 build anyway.. what gives?

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12277
  • Emergencies only
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1419 on: September 14, 2016, 08:25:24 AM »
Last time I tried it, I could barely notice any difference.

If there is still interest in this feature, I can look into it again.

blitzkrieg666

  • New to the forum
  • *
  • Posts: 11
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1420 on: September 14, 2016, 09:51:35 AM »
Last time I tried it, I could barely notice any difference.

If there is still interest in this feature, I can look into it again.

Yup it worked flawlessly for me, both normal h.264 and raw/mlv won't have the red LED blinkin'.  So yea, rec.led.off is worth a look i guess.

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3228
  • 5D3 / M1 / 7D / 70D / SL1 / M2
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1421 on: September 14, 2016, 04:07:21 PM »
If there is still interest in this feature, I can look into it again.
+1
5D3.113 • 5D3.123 • EOSM.203 • 7D.203 • 70D.112 • 100D.101 • EOSM2.*

blitzkrieg666

  • New to the forum
  • *
  • Posts: 11
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1422 on: October 23, 2016, 06:58:30 AM »
With Nightly.2016Oct09.5D3123 build, rec.led.off is still disabled?
Anyone can confirm?

savale

  • Freshman
  • **
  • Posts: 69
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1423 on: October 28, 2016, 03:03:32 PM »
not sure if this is the right topic, but here we go:

specs:
5d3 1.2.3 With Nightly.2016Oct09.5D3123
FeelWorld 760 (1080p native 7 inch). I tested the monitor and it can display 1080p from my laptop. According the specs it can display @ 50/60//24 fps

camera settings:
I set the camera settings to mirror HDMI, PAL, 1920@24fps video
magic lantern settings to default.

But even what I try it always seems to output 1080i (50/60hz) over hdmi instead of 1080p @ 24

tried:
I tried ntsc, 25 fps, 24fps hdmi output as options, but it's not helping.
is it even possible or am I missing something?

Lars Steenhoff

  • Senior
  • ****
  • Posts: 453
Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3
« Reply #1424 on: October 29, 2016, 12:21:51 PM »
@savale

I think thats normal, when I use the atomos ninja blade I can select in the ninja menu if I want to do pulldown to 25p when the camera outputs 1080i.

By the way if you only use it for monitoring 1080i should be fine, the camera will record to 24/25p internally.