Author Topic: Canon 1100D / T3 (Read 1100985 times)

gabezermeno · « **Reply #50 on:** August 19, 2012, 10:14:18 AM »

so if i download everything from here http://nanomad.magiclantern.fm/1100D/ and then put them on my formatted sd card and update the firmware it will work?

gabezermeno · « **Reply #51 on:** August 19, 2012, 10:29:19 AM »

the link to " this FIR" doesnt work. i think i need that

gabezermeno · « **Reply #52 on:** August 19, 2012, 10:39:35 AM »

ok well i tried my best and it seemed to work except when its installing on my camera it says fonts.dat is not found. and im positive that its in the ml data folder

gabezermeno · « **Reply #53 on:** August 19, 2012, 10:46:42 AM »

ok ive done it! but uhh.. how do i get into the magic lantern menu? haha. i can see the extra things when im in live view but ive pressed pretty much every button and i cant seem to get in to the ml menu

nanomad · « **Reply #54 on:** August 19, 2012, 10:58:14 AM »

Lol, I forogot to update the first post. I wouldn't use that autoexec.bin

gabezermeno · « **Reply #55 on:** August 19, 2012, 11:01:34 AM »

where can i get the better one? it seemed to work although i can only open the magic lantern menu in video

nanomad · « **Reply #56 on:** August 19, 2012, 11:16:26 AM »

I've fixed the compiler issue (it wasn't the compiler actually, but my system using python 3 as default). The autoexec.bin should be coming shortly

gabezermeno · « **Reply #57 on:** August 19, 2012, 11:20:18 AM »

awesome

nanomad · « **Reply #58 on:** August 19, 2012, 12:43:54 PM »

Uploading

nanomad · « **Reply #59 on:** August 19, 2012, 12:59:40 PM »

Alpha 1: http://nanomad.magiclantern.fm/1100D/magiclantern-v2.3.1100D.Alpha1.zip

Use this FIR (for 1100D 1.0.5) to enable the bootflag.

I DEMAND feedback if you try to run it.
Notes:
FPS override: Auto FPS selection doesn't work but you can increase the timerA to get the desired FPS manually
ML menu in Video mode can only be exited using half shutter press

As always, remember that is HIGHLY EXPERIMENTAL CODE , use it at your own risk. Read the Install.txt CAREFULLY and follow the optional/suggested steps too!

nanomad · « **Reply #60 on:** August 19, 2012, 02:18:08 PM »

Alpha 2 HOTFIX: http://nanomad.magiclantern.fm/1100D/magiclantern-v2.3.1100D.Alpha2.zip

What's new:
- Fixed a typo in button detection
- Moved audio meters in audio menu
- Rebased against latest ML 2.4

wave · « **Reply #61 on:** August 19, 2012, 02:32:08 PM »

Nanomad first thank for your hard work...I have shortly tested this alpha
1. ML menu is available only on P and movie mode(with short press on Av button)
2. In P mode-Expo if I change white balance from auto to any other number I cant reverse anymore to auto wb(or I dont know)
3. Movie mode-If I turn Exp.override to ON the shutter speed number are going somehow like 1.0.000 or 1/2941.2.3,I cant change to 1/50,1/60 etc
5.I can see the AUDIO tab but I cant go in
4.And for the end my camera crashed 3,4 times while the FPS override was ON,if I find the crash logs files I will send to you or upload here if u want

That was the bad side

From the options that I like are HDR is now in full potential because of working submenu button Q
Follow focus is really cool option also the rack focus
Font are much much clearer and also readable without glasses

PS: On image review zoom in function is not ok
I hope I helped

wave · « **Reply #62 on:** August 19, 2012, 02:57:41 PM »

Update to my previous post... mow is alpha2

ML menu now works on all modes exept on P
Camera is still crashing in Exp.override put to ON
Audio meters are now OK

nanomad · « **Reply #63 on:** August 19, 2012, 03:16:48 PM »

Are you running the latest canon firmware?

wave · « **Reply #64 on:** August 19, 2012, 03:18:37 PM »

Yes,1.0.5

nanomad · « **Reply #65 on:** August 19, 2012, 03:19:29 PM »

Ok, I think I know what's wrong...
Get on irc.freenode.net channel #magiclantern so we can test quickier

nanomad · « **Reply #66 on:** August 19, 2012, 03:31:31 PM »

1. ML menu is available only on P and movie mode(with short press on Av button) <- Fixed, sometimes you have to double tap the button ... especially in LV
2. In P mode-Expo if I change white balance from auto to any other number I cant reverse anymore to auto wb <- Just set AutoWB from Canon's Q menu
3. Movie mode-If I turn Exp.override to ON the shutter speed number are going somehow like 1.0.000 or 1/2941.2.3,I cant change to 1/50,1/60 etc <- ML Uses "exact" apertures. The LV bottom bar will display the corresponding "Canon" Aperture
5.I can see the AUDIO tab but I cant go in <- Fixed
4.And for the end my camera crashed 3,4 times while the FPS override was ON,if I find the crash logs files I will send to you or upload here if u want <- What were you changing? FPS override is super-hacked on the 1100D btw

*** Alpha 3 ***
http://nanomad.magiclantern.fm/1100D/magiclantern-v2.3.1100D.Alpha3.zip

nanomad · « **Reply #67 on:** August 19, 2012, 05:09:04 PM »

** Beta 1 **
http://nanomad.magiclantern.fm/1100D/magiclantern-v2.3.1100D.Beta1.zip

Disabled stuff that caused many of the Err70:
- Defishing
- Magic Zoom
- Audio Remote Shot
- FPS Override (Compile it yourself if you want to fiddle with that since we have to figure out how to safely change it)

Known bugs:
- Exp. Override sometimes shows weird values
- Canon LV bottom bar sometimes messes up with ML bottom bar

superman13 · « **Reply #68 on:** August 19, 2012, 06:41:09 PM »

I still have no idea why my camera is saying fonts.dat not found.. I did everything in the notes and still not installing.

[edit] Ok so it's working without having the fonts.dat found... I'll continue to test out.

nanomad · « **Reply #69 on:** August 19, 2012, 06:47:41 PM »

There's an issue with the .fir, place it both in the root of the SD card and where is it now.

gabezermeno · « **Reply #70 on:** August 19, 2012, 09:00:48 PM »

the timelapse feature works and thats all that i wanted

also will we ever be able to change the aperture and shutter speed in video?

wave · « **Reply #71 on:** August 19, 2012, 11:08:43 PM »

Yes we are able now,just put exp.override on and you have manual controls in video thanks to nanomad

gabezermeno · « **Reply #72 on:** August 19, 2012, 11:17:26 PM »

oh thanks

thechin · « **Reply #73 on:** August 20, 2012, 05:20:34 AM »

Thanks nanomad...

Installed tonight and able to see ML menu/functions.
Will do some more testing tomorrow.

Brand Brand · « **Reply #74 on:** August 20, 2012, 08:58:08 AM »

Great job nanomad and all the other developers who are helping out... now time for a test drive!

News:

Author Topic: Canon 1100D / T3 (Read 1100985 times)