Canon 1100D / T3

[a1ex]

Do you have any function assigned to SET?

It's not caused by the warning screen, that one goes away after first key press.

Defishing should work if you use shoot_malloc instead of AllocateMemory. Need to find out how to free it though.

[wave]

huh thats odd, I formatted my card, copied over all the ml files again from rc3, and made sure the files/folder were not read only, but I still get the glitch.

Heres a video of it.

http://www.youtube.com/watch?v=34Ike5gQDJ0

Did you clear the settings in camera before install ML?

[Grzld]

I had depth of field preview assigned to the set button, disabling that cleared up the issue. 

[nanomad]

New bug: focus peaking is off by a few pixels in video mode. Probably a bug in one of the coordinates transformations routines of ML (HD2LV?)

[a1ex]

Check if the HD buffer includes the 16:9 bars or not.

[nanomad]

Fixed the HQ silent pics in movie mode, we can grab (c)raw 1280x720 frames.

Too bad they are too big to be saved to card as a video stream otherwise we could do decent fullHD in post-processing. Here's how a 720p craw file looks like when upscaled to 1080p

http://i.imgur.com/IX06W.jpg

Let's hope in mjpeg 422

[ilguercio]

Nice to see the 1100D is keeping up with the development.
Nice to see you're born in my same region as well

[nanomad]

Lol

So, a1ex managed to fix the bug that was causing weird images with low ISO in movie mode (it was a bug in ML code that affected all cameras)

I'll go thorugh all the posts again but the only thing that should be left is the damn focus peaking while on standby in movie mode....

[kapueblo]

Manual video exposure: Working
FPS Control? You can only go down
Other resolutions? Nope. ML never did that
Higher bitrate? Sure, as long as you've got a fast SD card
External Mic? No need for ML to do that, just open the camera and solder a female 3.5mm female Jack to the current mic wires.

I just bought a Canon T3 and I was sad that there wasn't any manual settings for video. I installed ML with no problems but I still haven't figured out how to set manual video exposure. I tried finding a tutorial, but so far I haven't had any luck.

Pretty much treading on unfamiliar ground, can anyone help me out?

[nanomad]

Open ML menu, go to exposure set manual exposure to Auto then change the settings from the same menu

[kapueblo]

Open ML menu, go to exposure set manual exposure to Auto then change the settings from the same menu

I read that on the user guide on the site too, but so far, every time i set the settings on the ML menu and switch to movie mode, the settings don't apply and the exposure settings are still automatic.

am i doing something wrong? or is it some kind of bug with the RC3 firmware

[nanomad]

Did you clear camera settings before installing? You may have the SET button assigned to something else, if so, change it to "no function"

[jonmeeker]

You guys are awesome. Saw the post about the low iso movie mode fix. gonna try it out! Thanks for all all the hard work!

[jonmeeker]

So this is the issue I am having with any ISO below 200, in movie mode of course. Is there any reason it should do this? It happens whether GlobalDraw is on or off, and focus peaking/zebras etc.

http://youtu.be/rm12_HGqBu0

[nanomad]

Hit the Q button in the iso option and turn off Highlight tone priority if you want to use ISO below 200.

Alex fixed this yesterday night so it's not in the 1100D build yet (I'd like to fix the offset of focus peaking while in movie standby first)

[jonmeeker]

Wow, I had totally forgotten about HTP, sorry my bad! Thanks, I really appreciate that.

If there is anything you guys would like me to do, let me know.

Jon

[nanomad]

Yes, test every single function and report any bugs I've missed

[kapueblo]

tnx for the help nanomad, i was able to get the manual settings to work in video. however a new issue sprang up...

i read earlier the someone's iso started to jump from high to low while in video mode. I was wondering if you encountered this problem too.

i've tried clearing settings and reinstalling ML. I have shutter lock on and HDR video off, but the iso still fluctuates.

[nanomad]

Can you make a video?

[kapueblo]

Can you make a video?

heres a vid i uploaded concerning the issue

http://www.youtube.com/watch?v=Lo77dM6yoqo&feature=youtu.be

[nanomad]

Ok thanks, can you post the expo override settings you used?

[kapueblo]

Ok thanks, can you post the expo override settings you used?

ISO 1600
Shutter 1/61
Aperture f/16

Exp. Override set to Auto

[nanomad]

Do you have Highlight tone priority on?

edit: I, again, can't reproduce it.... there must be some option I'm missing. Try deleting ML settings too (ML/settings folder)

[nanomad]

edit: interesting, image buffer is 720x214 in movie mode, HD is 1280x720 fixed

And I've fixed the last reproducible issue, focus peaking in movie mode!!!!

[kapueblo]

Do you have Highlight tone priority on?

edit: I, again, can't reproduce it.... there must be some option I'm missing. Try deleting ML settings too (ML/settings folder)

i deleted ML settings, and i tried with highlight tone priority on and off, still get the fluctuating iso : /

Right now i'm trying to see what sets it off. so far the way i can get it to sure fire fluctuate is to put some sort of light source or bright area dead center. sometimes it does it, sometimes it don't. perhaps it depends on my exposure settings.