Author Topic: Canon 1100D / T3 (Read 1125269 times)

leeb9972 · « **Reply #175 on:** September 09, 2012, 05:29:03 PM »

Hi Folks

Lee here, totally new to this forum, I have the Cannon 1100d (bought in UK) installing 2.3 will not brick camera, and i CAN take off if i wnated to (i would suppose i just format card?) thanks in advance

Lee, Scotland

Grzld · « **Reply #176 on:** September 09, 2012, 05:45:57 PM »

Quote from: leeb9972 on September 09, 2012, 05:29:03 PM

Hi Folks

Lee here, totally new to this forum, I have the Cannon 1100d (bought in UK) installing 2.3 will not brick camera, and i CAN take off if i wnated to (i would suppose i just format card?) thanks in advance

Lee, Scotland

As I understand it magic lantern launches along side canons firmware every time you start up the camera. Magic lantern doesn't replace canon's firmware in the memory of the camera so it relatively hard to brick your camera. The most dangerous part is upgrading Canon's firmware to the current version which really isn't very hard. If you want to remove magic lantern just format the card from inside the camera. If anything watch some tutorials and read up on the wiki abit.

nanomad · « **Reply #177 on:** September 09, 2012, 06:25:24 PM »

Keep in mind that the 1100D is still experimental so there's the possibility of actually screwing up things (although I've yet to experience it)

colinjshelton · « **Reply #178 on:** September 09, 2012, 07:00:22 PM »

I installed RC 2.1 the other day, and I noticed that when I was recording, my exposure was changing at a constant rate, causing the movie to brighten and darken. Exposure override was set to on (auto), and I also had the same result in just on. I had my expsoure set within ML...but it seemed like the canon auto expsoure kept trying to override it. Any help is appreciated.

nanomad · « **Reply #179 on:** September 09, 2012, 07:41:07 PM »

The easiest way is to actually delete ML config and try to reproduce the issue...you probably had HDR video on by the sound of it

colinjshelton · « **Reply #180 on:** September 10, 2012, 06:31:35 PM »

hdr video was not on...I'll try and record a video and show you what I'm talking about. It seems like my shutter angle changes by real small increments, like if i set it in the ML menu to 56.5, it'll change between 56.5 and 56.3 for a couple seconds, then calm down.

nanomad · « **Reply #181 on:** September 10, 2012, 06:49:03 PM »

Uhm, yes. Please upload a video
There's a shutter lock option in the settings, see if it helps you

benjaminang · « **Reply #182 on:** September 15, 2012, 08:26:54 AM »

I wonder is it normal whenever u took a photo/video, when return to the screen, those focusing peaking/magic zoom
goes hey-wired, this is not normal rite? wonder if this bug has been reported..
I actually need turn off turn on live view to get back normal.

nanomad · « **Reply #183 on:** September 15, 2012, 11:00:13 AM »

I know it. I'm trying to find the culprit but it takes time

benjaminang · « **Reply #184 on:** September 15, 2012, 11:41:24 AM »

Keep up the gud work!! I know it takes take, feel bad tat I haven't got the knowledge to help out, I'll be patient.. peace!!

Simon · « **Reply #185 on:** September 16, 2012, 08:18:25 PM »

Thanks for your work nanomad ! Is there any chance we can get 1080p recording on the 1100d ?

nanomad · « **Reply #186 on:** September 17, 2012, 12:36:44 AM »

there's hope but my tests so far resulted in semi bricks of the camera and are currently on hold

snobaakp1 · « **Reply #187 on:** September 17, 2012, 11:19:15 AM »

how bout 60p natively? is it possible?

nanomad · « **Reply #188 on:** September 17, 2012, 01:34:50 PM »

Everything depends on how cheap canon wanted to be. The 1100D is a dumbed down 600D so everything that works there *should* work here minus hardware differences

wave · « **Reply #189 on:** September 17, 2012, 05:40:06 PM »

So Nanomad we can soon expect from you 60fps on 1100d right?

nanomad · « **Reply #190 on:** September 17, 2012, 06:57:47 PM »

You wish

Hybridz0rz · « **Reply #191 on:** September 17, 2012, 11:05:57 PM »

Hey, Bug report.

The Magic Zoom is bugging out after a picture is taken. it freezes the little zoom box and wont work until restart.

The settings are:
Trigger mode : ZoomIn (+)
Size : Medium
Position : NorthWest
Magnification : 2:1
Focus Confirm : SplitScreen

Second bug/ problem is the Overlay.

the overlay gets slightly fucked up by the standard Fstops iso shutter speed all of those just randomly overlaps the histogram waveform and those reedouts from the bottom of the screen.

nanomad · « **Reply #192 on:** September 17, 2012, 11:18:12 PM »

The first one is new, the second one it's not a bug, it's a stupid feature of canon's firmware .... even with "no overlays" it insists on drawing a couple of things

snobaakp1 · « **Reply #193 on:** September 18, 2012, 12:47:00 PM »

so wait, no 60 fps?? awww,. sad

Acpawa · « **Reply #194 on:** September 18, 2012, 10:45:32 PM »

Hello guys, great work!

I can't seem to find but what can work on the T3 with the latest (RC2) version for video?

Manual exposure for ISO, aperture and shutter?
FPS Control? Like up to 35 FPS and as slow as 5FPS?
Other resolutions? 1920x108030/24FPS?
Higher bitrate? I think the top is 40Mbps?
External mic via installing it?

nanomad · « **Reply #195 on:** September 18, 2012, 10:50:35 PM »

Manual video exposure: Working
FPS Control? You can only go down
Other resolutions? Nope. ML never did that
Higher bitrate? Sure, as long as you've got a fast SD card
External Mic? No need for ML to do that, just open the camera and solder a female 3.5mm female Jack to the current mic wires.

Hybridz0rz · « **Reply #196 on:** September 19, 2012, 12:02:12 AM »

Hey, I was using the cam today and I noticed that wwen everything went black small blue dots appeared and now they and small red dots keep glitch in on the screen

(red dots aren't the. ZEbra these dots are somthing else.)

Hybridz0rz · « **Reply #197 on:** September 19, 2012, 12:04:22 AM »

Oh and btw is there in any way I can help this port to get integrated faster
?

nanomad · « **Reply #198 on:** September 19, 2012, 12:13:42 AM »

You've got focus peaking enabled.

And if you can write C code you can help me fixing bugs

artstylish · « **Reply #199 on:** September 19, 2012, 09:42:13 AM »

Sir i am dying for final version of Magic Lantern for canon 1100D. Sir i have Canon 1100D. I want to install magic latern on it but i am watching daily that you all genius are going step forward day by day in magic lantern hack issues. after RC2 release there are so many modifications have done so far. So where i can get a download link of latest magic lantern for 1100D?

could you release RC3 for those who are waiting for your final modifications in magic lantern?
please send me a download link for latest magic lantern for 1100D.

thank you very much all of you and i pray for you.
good luck
artstylish

News:

Author Topic: Canon 1100D / T3 (Read 1125269 times)