Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - rinski

#1
Hello, I wanted to report that the iso is locked in auto and the shutter is disabled in the latest version 5d3 123, everything else is great, the preview especially.
Thank you.
#2
Hello, I wanted to mention the useful view of the 5D3 view on the 5D3, adding the 10x zoom (it helps a lot in the manual approach) and the 18 fps in the full anamorphic as in the eos m.
Thanks.
#3
Hello, I wanted to report that the December 2nd version makes many errors such as corrupt frames and high instability in full anamorphic.
Thank you.
#4
Full anamorphic 18 fps 240 MHz? 5d3
#5
card full
load error 0:ML/CROPMKS/16_9.bmp
#6
Hello, could you explain to us how the lua script is disabled, it gives me an error and the version of the sd patch is that of September 17, 2021?
Thank you.
#7
Algo 5k anamorphic eos m 7 minutes, Full anamorphic 5d3 19 minutes. Thanks you
#8
Hello, could you explain what the parameters are, for the x5 mode centered 1: 1 from 3.5k to 3456x1728 10bit, I can't use it. Thank you.
#9
Hello, I wanted to inform that with the version 01-30-21 for 5d3 in full anamorphic it generates a multitude of corrupt black squares.
Thank you.
#10
Hello, I would like to comment that the sd_uhs module works well in 160 mhz and only with 240 mhz it has problems of sound loss after 3 minutes with 20, with sandisk extreme pro 170 MB / s 128 GB card, formatting the sd card or deleting the files on the computer has no danger, and the increase in speed recording with both cards at the same time is appreciated when recording with looser parameters and much longer.
Thank you very much Danne and company for your meritorious work.
#11
Hello, with the same previous parameters and with the 240mhz patch I tested the sdxc sandisk extreme pro 170 MB / s 512 gb v30 u3 with speeds cf 103 MB / s and this sd 78 MB / s 14 bits for more than 7 minutes without stopping, stopping what I, also with the latest version 5d3 123 without jams and with correct reconstruction in mlv app.
In November 2018 there was an option of 1920x3240 10 and 12 bits with 110 MB / s (90 + 20) between the CF + SD, which would be good with the new speeds, thanks.
#12
Hello I wanted to comment that with the 5d3 1.2.3 full anamorphic 3240x1920 av11, iso100, 1/64 in sunny shots, with both cards sandisk extreme pro 128 gb 95mbs + lexar professional 128 gb 1066x 166mhz, 14bits 6 minutes 100+ 70 mbs 15,003 fps , on your latest compilation, could it be possible to zoom to 16 or 17 fps like the eos m for better optical flow?
Thank you.
#13
Hello, I with the 5d3 and the 2 cards at the same time (Danne's version) I have recorded with 165 mb / s maintained 6k 15 fps 14 bits, more than 7 minutes at continuous speed, I think the 5d4 and other canon with connector mini usb 3.0 could dump the rawvideo into a ssd with its dual female usb 3.0 adapter and this one to usb male to usb-c external ssd with 500 MB / s theoretical. Thank you.
#14
Hello, version 5d3 works very well for me, July 4 1.2.3, 88MB / s cf Lexar 128gb 1066x + 78 MB / s, extreme pro sandisk 170MB / s, 240 patching, more than 6 minutes voluntarily interrupted with parameters 1/166 iso 200 av 9.9, on the outside with the full anamorphic resolution 1.1, 1920x3760, the two cards in fat32 without restart problems when turning off and on and more or less maintained the speed, the 3x3 Binning pixels would be wonderful to obtain more than 15,003 fps no aliasing / moire.
Thank you.
#15
Hello, I wanted to comment that I miss the height in the anamorphic 5k the height of 1900 as before July 5 and even more the 2160 in 16.9 with the increase in speed, in 12 bits.
Thank you.
#16


Full anamorphic 1.1 1920x3760 14 bits 15,003 fps, 6 minutes 240 mhz with little drop in speed 91 MB / s cf lexar 1066x 74.5 MB / s, sdxc sandisk extreme pro 170 MB / s. Thanks for your work.
#17
Hello, I have used in twixtor plugin with resolve 16 studio for 5d3 14 bits 1920x3240 15.003 anamorphic and it does not improve just in the interpolation at 24 fps, some advice to edit with this resolution.
Thank you.
#18

428/5000
Hello, the sd_uhs module works perfectly with my manual samyang xp 50mm 1.2 lens and with the professional lexar cf 1066x 160 MB / s and sdxc sandisk extreme pro 170 MB / s cards I can record in full anamorphic 6k 1.1 1920 x 3760 in 14 bits with 15.003 fps, indoors and outdoors, maybe 5 more minutes, and I'm wondering if it would be possible to enable 23,976 fps in 12 or 10 bits in this format for smooth movement.
Thank you.
#19
Hello, would there be any possibility of full anamorphic 6k with 23,903 even if it was 12 or 10 bits in 5d3 ?.
Thank you.
#20
Hello, I would like to see how the m00 files are reproduced and edited in the mlv app, the time recorded on the sd card with the spanning function is lost when trying to import the mlv file from the cf card, there is some operation to be done with the m00 file to be recognized by the mlv app ?, I have not found a solution for the 5d3 with the experimental version May 17.
Thank you.
#21
Hello, please I can't find in the last update for 5d3 firmware 123 from February 19th where is the module sd_uhs card spanning nor the overclocking and the menu to record sd+ cf, someone can guide me.
Thank you.
#22
Hello, thanks for the answer the other day but I can't find the menu to record the 1920 x 2332 anamorphic adding the two sd + cf cards and at the moment I can only get to 1808, how and where are the settings in the magic latern menu Simultaneous recording and sd speed unlocking.
Thanks again.
#23
Hello, I would like to know if you have to install the ML firmware on the 2 sd and cf cards at the same time, to record with both simultaneously, how the expansion sd works and what limitations this type of recording has on 5d3 in short.
Thank you very much.
#24
there is a horizontal line in the center of the video
#25
Hello, can someone help me run a samyang 35mm f1.2 I can not shoot or record with the eos m even if I have it in manual?
Thank you.