Messages

this is my simple and cheap wired follow focus system
https://vimeo.com/231523474

I just updated it so that if you change the color depth (which you probably wouldn't normally do) it will plug into the formula (I had it hard-coded to "14" before).

nice work !

As i known - SteadyXP uses audio channel to sync the movement data with video. Another idea - you can use custom app on your smartphone (gyroscopes, accelerometers) to record this data and then sync it in post somehow (sound, or trigger).

thanks 350D,
Almost all android app I tested can not record data with fixed sample rate 

not shure we have enough processor speed for both recording and quaternions calculation IMHO

if you have a Canon Camera , test it ! 

Like this: http://petapixel.com/2014/09/05/steadxp-hopes-add-accelerometer-dslrs-gopros-better-image-stabilization/#more-144279

how would one use the information for stabilization ?

I can write program for this reason, but now I don't have camera for record and test it.
if anyone can record and send for me, i can test it.

http://builds.magiclantern.fm/features.html -> LEVEL_INDICATOR; these cameras report at least the roll angle; some of them also report the pitch angle. These angles are recorded from accelerometers, not gyroscopes.

For your purpose, I'm afraid none of them are good enough, but feel free to prove me wrong.

many thanks a1ex, you are nice man!

http://www.magiclantern.fm/forum/index.php?topic=13229.0
http://www.magiclantern.fm/forum/index.php?topic=15426.0

thanks a1ex,
which camera have accurate sensor?

Hello,
first of all thanks to you developers to do this amazing job!

I know many of canon cameras have built in gyroscope sensor for correcting angle of photo.
if we do record gyroscope data, in every frame, we can stabilize video in post same as "Steadxp" work.
the "Steadxp" is a similar device, that can record angular acceleration with fixed sample rate...... see her website :
https://www.steadxp.com

Please tell me if this is impossible, how can I do this like "steadxp"
I use "Arduino+MPU-6050" and so on, but its very hard to match the data and video 
(sorry for my bad english)

FYI: I am going to release a new Alpha today for testing. Again only for those cams which were already been able to run the previous builds.

Whutt?? U copied my post, haha. Well, looks like we are on the same page.  Will wait for the team to update, no pressure on nik and the team

ha ha, yeah. because my english is very low.

sorry fever003

[028#########]

Hi,

I can confirm mine does not work after following the steps.

Possible reason is mine is the old 70D, bought in December 2013 with serial number of 028#########.

The camera says Firmware update program, loading... and immediately reboots with Sensor Cleaning and nothing happens. No activity on the red LED too.

Will wait for an update

Thanks alot nikfreak for your effort

(copy / paste & change serial)

Now I have Canon 70D and I'm waiting for ML 

There's no ML for 70D yet, so I have no idea. Most likely it will be similar to the other DIGIC V models with SD card (but that's just a wild guess).

tanQ a1ex 

[buffer size]

thanQ my friends,

But my question is about buffer size and Max write speed and somthing like this !

this camera has everything I need from my digital camera, just I'm fear about ML...

I hope ML developers answer me...

why the canon 70d is not in there list? 

[focus system]

Hi !

I want to buy a camera for videography, and I don't know which camera is best for raw recording??
I Really like Canon EOS 70D for focus system and some other Abilities,
But I fear that Canon EOS 70D Misses work with ML 

(sorry for my bad english)

[7fps continuous shooting, burst depth 65 JPEG / 16 RAW]

Hi !

Canon EOS 70D key features

    20.2MP APS-C 'Dual Pixel CMOS AF' sensor
    DIGIC 5+ image processor
    ISO 100-12800 standard, 25600 expanded
    7fps continuous shooting, burst depth 65 JPEG / 16 RAW
    'Silent' shutter mode
    1080p30 video recording, stereo sound via external mic
    19-point AF system, all points cross-type, sensitive to -0.5 EV
    63-zone iFCL metering system
    98% viewfinder coverage, 0.95x magnification, switchable gridlines and electronic level display
    Fully-articulated touchscreen, 1040k dot 3" ClearView II LCD, 3:2 aspect ratio
    Single SD/SDHC/SDXC card slot
    Built-in Wi-Fi
    Single-axis electronic level
    Built-in flash works as off-camera remote flash controller
    AF microadjustment (can be set individually for up to 40 lenses, remembered by lens serial number)
    In-camera High Dynamic Range and Multiple Exposure modes (JPEG-only)
    'Creative Filter' image processing styles, previewed in live view

http://www.dpreview.com/previews/canon-eos-70d

this body has more buffer !!!!! 
What is your opinion of that ??

Hi !

I have a question, which camera is best for video raw recording?
(Best buffer speed with Low Price...)

thanks

If Microsoft did have a build-in OS program like AppleScript/Automator I could! 

http://www.autoitscript.com/site/autoit/

I know, you can ! 

I was tired of opening the SD card on my Mac, copying the ML RAW files to my Desktop, drop them on raw2dng en delete the old RAW files on my Desktop.
I'm not a software programmer but made this possible with Apple's Automator.

1. Insert the SD-card
2. Start the Automator "ML RAW 2 DNG v0.01" task and the program will find the RAW files on your SD-card!
3. Wait till the RAW files are copied to a folder on your desktop named "ML RAW - {year}{month}{day}" and processed by raw2dng.
4. Press "Yes" to delete or "No" to keep the RAW files in the "ML RAW - {year}{month}{day}" folder.

Have fun!

https://docs.google.com/file/d/0B6VUdellP9ybQXE3WkdCWngyYUU/edit?usp=sharing

wow! can you made another version for windows??

I have many idea for ML (in camera) where I can say my idea??

Hello,

I am having an issue. Whenever I try to process the footage in AE it get this error after hitting import. "After Effects error: the file format module could not parse the file. ( 45 :: 35 )" I followed all of the instructions of this tutorial: http://www.youtube.com/watch?v=0fGIIAQXXxQ

I am not sure what I am doing wrong. Any help would be most appreciated.

what footage?

you should convert 'raw' file to dng , then use in AE 

try with this :
http://www.magiclantern.fm/forum/index.php?topic=5404.0

Hello all,

sorry for being a noob and slightly off topic... I currently have ML v2.3 installed. Do I need to reformat my cards and set my camera back to factory before installing the nightly builds?

Thanks

No, Just replace autoexec.bin in root folder and place "modules" in ML folder.

RAW2DNG is also for PC (and Linux). Check the post here for the downloadlink:
http://www.magiclantern.fm/forum/index.php?topic=5404.0

very very thanks my friend 

@saeed2vfx: you don't open these files in photoshop - they are not .RAW 32BPC HDR files that it supports. You need to convert it to a DNG sequence using RAW2DNG. Once you have the sequence, you can import it into After Effects or other editing/compositing suite (subject to support for DNG sequences) and start playing around with it.

thanks for reply

I know this is video !! But in my laptop, just Photoshop know this file...

I have not Mac , Can you get me a free software for convert these file in PC ?? 

I love MagicLantern and who made this and dev....... !!

well, I copy that file and add modules and finaly record raw !

But...

when I copy files to my laptop and try to opening... my face changed, like this -=> 



when drag to photoshop :



when opened :



( very sorry for my bad english  )

[Not Found]

Not Found