Messages

26

Raw Video Postprocessing / Re: cr2hdr-r OSX batch conversion app (dng, CR2 ,MLV, RAW, HDR video)

« on: March 30, 2015, 11:50:35 PM »

Hurrah - the 70D_color_matrix.command worked - and big thanks to you, Danne!!!
I can now open the DNG files (no more errors!)  - although I still do see some noise but its not as bad as before.  I am still figuring out how to make my dual ISO CR2 shots cleaner (must be something with my exposure setting).

Will play around with ML extensively again this weekend :-)   I will be trying the HDR bracketing and time-lapse next - I think these may be easier to test than dual ISO

27

Raw Video Postprocessing / Re: cr2hdr-r OSX batch conversion app (dng, CR2 ,MLV, RAW, HDR video)

« on: March 30, 2015, 08:56:50 AM »

Hi Danne,

Thanks again for your input - was just getting ready for bed when I saw your reply. 

I reran cr2hdr-r.app as you suggested and - voila - within one minute the DNG files were generated (and the CR2 files went to ORIGINAL folder as expected).

However, it is strange that when I try to open the DNG file via Photoshop - Photoshop issues this error message: Could not complete your request because the file-format module cannot parse the file.

I am attaching one of the CR2 file and its corresponding  DNG file as follows -
IMG_7442.CR2 file - https://drive.google.com/file/d/0BwB_poTzzVK8RElTQ2Z1R0lndU0/view?usp=sharing
IMG_7442.DNG file - https://drive.google.com/file/d/0BwB_poTzzVK8bEtQamZKbDgtR1U/view?usp=sharing

Thank you so much!  Will check back in the morning

28

Raw Video Postprocessing / Re: cr2hdr-r OSX batch conversion app (dng, CR2 ,MLV, RAW, HDR video)

« on: March 30, 2015, 03:09:33 AM »

thanks Walter - I just realized I have a google account so yes I should be able to share my files via Google Drive

29

Modules Development / Re: Dual ISO - massive dynamic range improvement (dual_iso.mo)

« on: March 30, 2015, 03:02:23 AM »

hi AudioNut and danne -

first of all thank you guys for your tireless assistance in resolving ML issues with 70D - I for one appreciate it very much (as I believe everyone else on here too).

I did try to research on how to do dualISO correctly - so I turned on the dualiso.mo and my DUALISO settings to 100 (on camera)/1600 (on ML), set the aperture and camera to Manual Mode - and take RAW image.   I notice that when taking pictures in dual ISO mode, the shots are alternating between a normal ISO 100 CR2 (the 1st, 3rd, 5th, 7th shot, etc) and the actual dual iso CR2 image with interlacing lines (2nd, 4th, 6th, 8th shot,etc).    Is that correct?  THANK YOU WALTER - I inadvertently changed that setting - now the Alternate Frame is OFF and I see interlaced lines in every image!

I am still trying to figure out how to change my aperture settings - by the way, here is my CR2 with the interlaced lines from my 70D which has really bad noise when I converted to DNG last night:
https://drive.google.com/file/d/0BwB_poTzzVK8RElTQ2Z1R0lndU0/view?usp=sharing

30

Modules Development / Re: Dual ISO - massive dynamic range improvement (dual_iso.mo)

« on: March 30, 2015, 02:38:13 AM »

Hello guys -  I did try to research on how to do dualISO correctly - so I turned on the dualiso.mo and my DUALISO settings to 100 (on camera)/1600 (on ML), set the aperture and camera to Manual Mode.
I was expecting that all pictures taken under DUALISO would show interlacing lines.  However,  I notice that the shots I took are alternating between a normal ISO image (the 1st, 3rd, 5th, 7th shot, etc) and the actual dual iso image with those interlacing lines (2nd, 4th, 6th, 8th shot,etc).    Is that correct?

I am still trying to figure out how to set the correct aperture for dual ISO so the DNG wouldn't come out so horrid... your inputs will be very much appreciated!
 

31

Raw Video Postprocessing / Re: cr2hdr-r OSX batch conversion app (dng, CR2 ,MLV, RAW, HDR video)

« on: March 30, 2015, 01:48:23 AM »

Hi Danne -THANK YOU - actually yes I did realize that before I found your reply - I found the binaries were empty (cause I ran install already) so I had to re-download again.

But this time, I downloaded the cr2hdr-r_5.3l_s version (not the latest, but I believe it should work for my photography CR2 files).  i ran install.command for the binaries after install and it was successful!

I replaced the cr2hdr.app with this new version, and double-clicked the app and pointed to my folder containing the two PHOTO CR2 files.

I have read your posts so I knew there would be those new (PRORES and HDR_RAW_MLV_MOV) folders created to handle the RAW or MLV videos - but I was expecting to but I don't see DNG files created   I wonder where should I find my DNG files?

Again, appreciate your comments!   

BTW is there a way to post screenshots or attachments here ?   I do not have a dropbox account

32

Raw Video Postprocessing / Re: cr2hdr-r OSX batch conversion app (dng, CR2 ,MLV, RAW, HDR video)

« on: March 30, 2015, 12:49:42 AM »

Hi Danne,

Sorry I just saw a post from EpicMedia from a few weeks ago who had the same problem - it seems like he eventually was able to install it on a different machine.  I on the other hand only have one Mac machine  

i saw you suggested in your post#271 in this forum as follows:

You could try to move all the binaries manually to the folder.
Hit cmd shift g. Then print /usr/bin.
In this folder drag all files and folders from the binary folder into /usr/bin.

am wondering if you could kindly share a more detailed way to do this?  from looking at the errors it seems like its trying to copy/rename  the ./Binaries_cr2hdr-r/* to /usr/bin/* but the ./Binaries_cr2hdr-r/ path is missing?  From my limited unix knowledge I could just right click on the "install this first" folder and select service> New terminal from folder...   after that I don't know which command I should execute ...  please bear with me and appreciate your help.

33

Raw Video Postprocessing / Re: cr2hdr-r OSX batch conversion app (dng, CR2 ,MLV, RAW, HDR video)

« on: March 30, 2015, 12:37:45 AM »

Hi Danne,

I've been trying to test Magic Lantern Dual-ISO (for photography only,NOT videos)for my 70D - took me almost 12 hours (not straight 12 hrs or i'd go bonkers lol)  and I saw this forum.   I notice this forum mainly focus on the RAW Videos so I hope my problem should hopefully (hehe) be an easier fix for you

initially I installed the cr2hdr-r-1.8 zip files (from your 1st post in this forum) - I followed the instructions to run the install.command and copied the cr2hdr.app to my desktop - I double-clicked the app and point it to my directory containing the CR2 files - the DNG files were created but for some reason it won't render - Photoshop said it could not parse the DNG files.

So I continued reading your thread and saw you uploaded the latest cr2hdr-r zip (version 5.3-s ).  after downloading I thought i should run the uninstall command on the 1,8 version, then do the 5.3 install.command.    I was surprised it didn't ask for a password so I tried to close the terminal windows and rerun the 5.3 install.command.  Then I am getting these errors now (

~ xxxxxxx /Users/xxxxxxx/Downloads/cr2hdr-r_5.3i_s/Install\ these\ first/install.command ; exit;
mv: rename ./Binaries_cr2hdr-r/lib to /usr/bin/lib: No such file or directory
mv: rename ./Binaries_cr2hdr-r/sox to /usr/bin/sox: No such file or directory
mv: rename ./Binaries_cr2hdr-r/exiftool to /usr/bin/exiftool: No such file or directory
mv: rename ./Binaries_cr2hdr-r/cr2hdr20bit to /usr/bin/cr2hdr20bit: No such file or directory
mv: rename ./Binaries_cr2hdr-r/dcraw to /usr/bin/dcraw: No such file or directory
mv: rename ./Binaries_cr2hdr-r/mlv_dump to /usr/bin/mlv_dump: No such file or directory
mv: rename ./Binaries_cr2hdr-r/raw2dng to /usr/bin/raw2dng: No such file or directory
mv: rename ./Binaries_cr2hdr-r/bwfmetaedit to /usr/bin/bwfmetaedit: No such file or directory
mv: rename ./Binaries_cr2hdr-r/bmcc_ixml_luts to /usr/bin/bmcc_ixml_luts: No such file or directory
mv: rename ./Binaries_cr2hdr-r/enfuse to /usr/bin/enfuse: No such file or directory
mv: rename ./Binaries_cr2hdr-r/ffmpeg to /usr/bin/ffmpeg: No such file or directory
mv: rename ./Binaries_cr2hdr-r/cr2hdr_r_speed_boost.workflow to /Users/xxxxxxx/Library/Services/cr2hdr_r_speed_boost.workflow: No such file or directory
logout

[Process completed]

could you share why i am getting these errors?    

34

Modules Development / Re: Dual ISO - massive dynamic range improvement (dual_iso.mo)

« on: March 29, 2015, 11:30:16 PM »

Hello guys, I just installed the ML Alpha4b firmware in my 70D - and been trying to test DualISO.  I am using Mac for post-processing.  So I have cr2hdr.app , dcraw (exec), and exiftool (exec) to be in one directory so I can double click on cr2hdr.app - which brings up a small cr2hdr window - and drag my dualISO CR2 file  into it.

The cr2dhr almost immediately spits out "sh: exiftool: command not found sh: exiftool: command not found" message (yes it printed that message twice) but it did eventually create a DNG file .  I opened up the DNG file in Adobe Camera Raw and it was HORRENDOUS . 

I would like to share my CR2, the generated DNG file, and the text log generated by the cr2hdr but for some reason I couldn't insert my attachment here - could anyone share how to add attachment to my post here?

Thank you

35

Share Your Videos / Re: around the world in Three minutes (4K timeLapse)

« on: March 27, 2015, 07:49:07 AM »

Beautiful! Which camera did you use?

36

Camera-specific Development / Re: Canon 70D (Alpha4 14th March)

« on: March 26, 2015, 11:10:31 PM »

I am new member of this post - just got my 70D last week (upgrading from Canon T1i - initially wanted the 7DMark ii but decided against it - I'm on a budget thus the 70D).   

Just dropping a note to thank the ML coders and testers for their hard work -  I am looking forward (no rush!)  to use Magic Lantern once the first version comes out   In the meantime I am going through the other posts to read the wonderful features of ML  (currently am interested in dualISO and intervalometer as I am primarily into photography, but looking to experiment with ML video features - raw video or HDR video - when I become more acquainted with the 70D camera).