Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - keepersdungeon

#51
I'm having the same issue, can't export audio track. I'm new to resolve so I'm still testing it. I've tried the linking but still no audio. Any help would be appreciated.
#52
Amazing thread! Very useful information, thank you all for sharing!
#53
Has anyone used the focus ramping in the intervalometer? I've been testing it out a bit and it seems to stop after 3-4 images after that the LV of the cam just goes black and no shutter release. Is it a bug? Or am I doing something wrong
#54
Quote from: beduinnn on December 30, 2015, 02:16:32 PM
And how to work on RAW since the introduction of Media Composer and Adobe Premiere require an additional plugin for minimum $ 150? On the limitation of bandwidth card in 6D to 41 Mb / s I did not know.
http://www.magiclantern.fm/forum/index.php?topic=5520.0

Check this.
There are many workflows to work with raw videos. I convert to dng using mlrawviewer then important them to what ever soft I need.
#55
Quote from: ikoniq on December 25, 2015, 06:03:40 AM
My first post here.  Want to thank everyone who's work on ML, what a joy.  Also, want to thanks Baldand and others for this wonderful MlRawViewer app.  Really enjoying shooting raw on the 5D2.

I recently got a 650D and am now faced with the pink dot or focus dot issue in my 1280x720 / 25p PAL footage.  Working on a Macbook Pro Retina 10.11.2 and MlRawViewer 1.4.3, I've found that the focus dots do disappear when I disable Stripes and hit 0.  However, the dots seem to persist in the exported MOV.  Anyone have any insights?  Happy to provide more info to help with troubleshooting.
The pink dot are normal on raw videos though u can lower the chance of having them. Try googling calibrating censor for Canon it's something that takes 30second to do it. U can also try converting to dng and try in lightroom or raw therapee. As for the dead pixels on focus point that is due to high ISO. Try not to go higher than 3200. Hope this helps
#56
Quote from: ultimatemarker on December 21, 2015, 12:30:38 PM
Ah I see thanks, but it seems like the 6d doesn't have audio gain yet.
U can find that I think in the main Canon menu if I remember well
#57
This is amazing! I've just heard of it. Was wondering Why it's added to the nightly builds by default? Anw thanks for sharing this!
#58
Quote from: széna on December 04, 2015, 08:17:00 PM
Hi,
I have Sandisk ultra 80MB/s card in my 6D.
I can record only 5 sec in 1728x972 resolution.
Can me help somebody why is it?

THX!
-széna
6D can support max around 45 mb/s write speed.  It's normal to get only 5 sec if u want more u need to lower ur resolution.
#59
Quote from: széna on November 28, 2015, 07:18:59 PM
Hello again... :)

No RAW video option in my video menu. What I do wrong?
SD card is sandisk ultra 32 mb/s 80mb/s - is it enought?

THX!
-széna
Activate the module mlv_rec in modules then restart the cam.  Make sure u activate the mlv_play for playback
#60
Quote from: norbi_nw on November 16, 2015, 04:25:31 PM
Hey guys. I moved from a 550D to a 6D (116), and I am having some "issues" with the focus box in LV mode. On my 550D that white rectangle was present in auto and manual focus. Now with the 6D, once I select manual focus, it disappears.. Is this normal? and if yes, is there a way to make it appear in manual mode?  My current workaround is activate the MagicZoom feature, and leave it always on, on focus box. That way I get a rectangle (even if it's with a zoom preview on small) to see where my focus point is.

ML is the only reason why I chose the 6D over a Sony a7. :)  ( i use MF Samyang lenses, and ML offers much better flexibility.. the half shutter zoom-in is ingenious).
It would be great to be able to move that box much faster, because it takes quite a few clicks to get it from one part of the screen to another (holding the D pad won't work.. you have to press for each movement separately).  So if you could implement a speed booster for that, it would be superb! like move 2x speed / 4x speed (like in zoom on playback).
It's weird, if I press and hold the focus points keeps moving. No need to press the arrow keys for each move
#61
Quote from: Levas on October 27, 2015, 06:30:30 PM
As far as I know ML only gives the signal that is the same as the photo-button-press.
So if the selftimer was on, ML gave a signal and then the camera waited 2 seconds because of the self timer.
Had som problems with mirror lockup in the past, I ended up with only half of the amount pictures I expected [emoji14]
Damn that sucks for the pics lol thanks for the info [emoji14], well that must be it for me,I must have left it on... it makes sense too. Thanks again for the help
#62
Quote from: Levas on October 27, 2015, 06:14:16 PM
In that case, it's not your card. That should be fast enough to write the image in one second to the card.
Mirror lock up or self-timer on ?
The mirror wasn't locked up, the self-timer u mean the one for when u take a single image? I don't remember coz I used the 2 second timer and can't remember if I left it on...  Hmmm it could be from that... Doesn't ML overrides it when u set the interval?
#63
Quote from: Levas on October 27, 2015, 05:54:53 PM
Are you using a (too) slow card?
7 seconds interval and 5 seconds exposure only leaves two seconds for writing the image to the card.
Normally this should work, but with a slow card...?
I have the Sandisk extreme 60mb/s, it does 45 write speed, I think it's enough no? plus the 6d can't write faster
#64
Quote from: Walter Schulz on October 26, 2015, 08:10:56 PM
I don't have a 6D at hand. Maybe others want trying to reproduce your issue.
And/or you want to check latest 1.1.3 nightly after downgrading.
Alright, well thanks anw Walter
#65
Quote from: Walter Schulz on October 26, 2015, 07:50:45 PM
"Long exposure noise reduction" at work by any chance?
No it was off, sorry forgot to mention it.
#66
Hello, was using intervalometer with 5 second exposure (no AETTR) and a 7 second interval and faced a lot of bugs, for instant if I was taking one and stopped it by going to the menu and starting it again the cam goes crazy sometimes it Adds lots of noise and freezes or it will starts counting the 7 seconds after the image is taken not when the shutter is pressed. Is that something known or due to the new migration to 1.1.6. Thanks
#67


Quote from: Jey on October 19, 2015, 09:30:07 PM
pointbob, did you find any information to obtain better quality in video mode?

I'm looking for decrease compression & increase quality, without use RAW.
The movie quality on the 6D is very poor. :(
Moire is horrible. Video compression is too high.

Please, do you have information to setup a good compression?
Thanks.

The moire for the 6d is normal, the only way to remove it is with a filter that u put on ur censor. Try to google it.
For h.264 u can use the All-I (low compression) that's the best u can have with it. Or just use raw from ML.
#68
Quote from: Walter Schulz on September 19, 2015, 05:27:57 PM
Color Space aRGB -> _MG
Color Space sRGB -> IMG
Use Google, please. Or read page 140 of your manual.
Of course, will do. Thanks anyway for your reply
#69
I'm having naming prob on my cam for the photos instead of IMG_xxxx it's _MG_xxxx and same for dualIso instead of "Dual... " it's "_ual..."  anyone knows how to fix this. Thanks

For movies it seems fine (raw or h.246)
#70
Quote from: Valox on September 15, 2015, 03:09:20 PM
I think ML deflicker makes better output than Lrtimelapse. Reason why i want to take pictures to Lrtimelapse is thats quite good tool for "animating" white balance etc. with keyframes. Any suggestion for similar post production what Lrtimelapset can do?

If pictures are already deflickered there's no need to use Lrtimelapse own deflicker. ..And anyway it doesn't (hopeful) make any chances when pictures are ready deflickered.
After de flickering in lightroom and importing them in LRTimelapse, just un-check the exposure 2012 and use it as u always do, and skip the deflicker phase.
#71
Raw Video / Re: Audio Missing in Resolve
September 14, 2015, 05:49:58 PM
Quote from: tecgen on September 14, 2015, 05:13:28 PM
Try to link the DNG-clip to the audio manually.
Yeah manually should be fine, I was just wondering why it works in PP and not in DR.  Well thanks anyway for ur reply
#72
Quote from: Levas on September 14, 2015, 04:11:00 PM
sound recording with MLV is a little longer than actual videoclip (at least with 6d that is  ;)).
If you trim the audio file at the end to match your video, it's perfectly in sync.
Alright cool thanks @Levas!
#73
Raw Video / Re: Audio Missing in Resolve
September 14, 2015, 09:10:28 AM
Been testing mlv with sound in DR 12 for the 1st time and I'm having the same problem it imports an empty track, it works fine with premier cc though.

Has this been resolved? Coz I can't seem to find an answer.
#74
Speaking of mlv_snd.mo, is it normal to have 2 black frames at the end of ur shots when sound is on?
#75
Quote from: gatocosmico on September 01, 2015, 02:06:18 PM
Yes, I have 4 batteries, the original and another 3 more., and I have the same problem with them. I tried a lots of softwares as well as linux SO unsuccessfully. The memory card is dead I think.

You are right, it is very difficult to know if it is a fake, but the item is sold and dispatched by amazon, as well as packed by amazon and sandisk with a special  cheap packaging, not the usual. Then Sandisk send the memory card directly to amazon and amazon pack the memory card. I Think that it is difficult to be a fake
If u format it, it will work but u'll lose all your data... Happened to me once and not sure what caused it, could be removing it fast after u open the lid