Messages

today I started a documentary filmed with the eos m, 150gb, 1480x1900, 23.97, 4.5k, sandisk 128gb extreme pro 170MBs, focus peaking and magic zoom on. Only 2 clips stopped. Maximum duration of one 17 minutes without a pink frame. The final clip fills the card but I still find it legible. Thanks, great work!

I succeeded, thanks for the advice, Redeercity changed the resolution of the crop, I can't find the resolution 28xx, anyway the visualization problems are many, I use eosm too and I was looking for a similar setting to the version of Danne.

hi guys, i would like to understand what is the latest experimental build for the 5dmk2. I have installed the February version of reddeercity but all the modules give error as soon as I restart the cam. Tips?

the only certain thing is that with 14 lossless, exposing to the right also increases the bit rate by 60%

Sorry Danne, I was talk about 9 april. I re test with the 11 april version, I think much better. My card is sandisk extreme pro read 170 MBs.

 I start always with lua cinema...

Great Danne, my card arrive at 60/61-2 MBs. unfortunately with the high resolutions as soon as I exposed the signal correctly the bit rate rises to 80/90 MBs

I'm confused, what are the statistically more stable resolutions that allow me to record continuously with a real-time display at least in black and white? Due to lossless compression I find that the bit rate increases up to 60% more, you have the same result?

I am using the 9 April night version, in 4.5k the 1502 x 1920 resolution has disappeared for some reason? The 14bit lossless data rate with correct exposure amounts to more than 70MBs, using ettr 90 or more of it ... right so? I'm working with sandisk pro 170 card in reading, the maximum speed at which I arrive is 55 and maximum 60/61, someone else has the same results? Thank you

I used all Danne builds from February until March 24th. I was able to continuously record the build on March 24th, shooting the two sd luas and 2.35 cinemas, in 4.5k. Proved that if I cast two or three recordings the pink frames occur but then in the next recording stabilizes and stops making them. This is my card


hosting gif

 The march 24 version is amazing, I work in 4.5k continually, without problems... I don't change this version it's stable...THANKS DANNE!

i read up, the 14 march version exist, i'm not crazy! Is it possible to have the 14 version again? I deleted it. THANK's

 Again, great work, the quality it's very good! I want to make only two question, the limit of write speed with sd overclock is more or less 55mbs? The cause of bads half frame pink are the card speed? Thanks

124/5000
yes I loaded module 2.35 1, can there maybe a max 60mbs sd speed  in writing?
However, I check with the new version. Thank you

Thanks Danne, great work! I put the lua sd and 5k active, I can also record for several seconds but the duration is random ... will also be problems with card speed? (sdxc c10 u3, should be 60mb in writing). Regarding the exposure I do not understand how sometimes the exposure is correct and sometimes burns with the usual pink pixels. What should I check?
Below some frames, failed (random but on average one every 2 seconds) and the "pink" problem.
Thanks again

Hi,
I installed your latest version and the magiclantern screen is empty, I'm back to the 23 Feb version. nothing, December, the same and that of July the same. Not being able to access the magic lantern menu can I install original firmware 2.0.2? thank you. PS previously up until the 23 Feb version worked well

Hi everybody
I need a help to use raw record with my 550. I'm an old user of ML but not in raw record. I try to use the available resolutions for the continuous rec but, for example, if I put 960x540, Magic Lantern crop the frame... anything wrong?
Thanks in advance