Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Dmytro_ua

Pages: 1 ... 7 8 [9] 10
Share Your Videos / Re: Wedding Short shot on 5DM2
« on: October 04, 2018, 12:09:22 PM »
I didn't want to gain up my ISO and get noisy results.

Why did you even bother about high ISO if you add so much film grain at post?

All your footage seems to be very overexposed.

Share Your Videos / Re: Lisbon moves // 6D ML RAW (x5 CROP MODE)
« on: August 01, 2018, 10:11:50 PM »
Amazing! As always  ;)

Share Your Videos / Re: Lunar Eclipse, 3K RAW and ETTR
« on: July 31, 2018, 11:20:23 AM »
Nice footage, but the sound is OVER compressed, the final RMS level is dangerously high/loud.

Raw Video Postprocessing / Re: MLVProducer: [v3200]
« on: July 19, 2018, 09:06:46 PM »
...if you found a computer where it was working. I never had one until it was discontinued. :P The good thing at MLVProducer & MLVApp: they run on nearly every computer!

Maybe you're right.
It worked smoothly on my desktop PC and laptop ASUS k56cb.
Actually it still works, but lacks the compatibility with a new MLV algorithms.

The lack of real time preview still is a big problem  :(

Raw Video Postprocessing / Re: MLVProducer: [v3200]
« on: July 19, 2018, 04:17:45 PM »
But I am not sure if it is fair to compare the two algorithms

It's not fair, but there are two different cases:
1. If you need to see the best quality of your color correction - slow preview and the best algorithm.
2. But if you want to sort out 100500 of video clips and pick the good one, then you need 100% realtime preview even if it is with the worst algorithm and with lower resolution (as in Premier Pro etc. - 1/1 full resolution, 1/2 half resolution, 1/4 resolution).

The weakest part of MLV in Canon cameras - no possibility to preview footage in realtime. Few years ago MlRawViewer did this pretty good but now it is abandoned... ((

I want to work with my videos in Photoshop therefore the CinemaDNGs...
Do you know any other way of getting the videos from MLV to photoshop as untouched as possible?

If you're good with PS, then for video I recommend you to use After Effects as it uses Adobe Camera Raw to interpret DNG files.
I wouldn't use PS for video in any case.

Raw Video Postprocessing / Re: MLVProducer: [v3200]
« on: July 17, 2018, 05:19:13 PM »
Sure. you can set FrameRate at output tab.

Thanks! MLVProducer has smoother preview than MLV App. Does it use any GPU acceleration?

Raw Video Postprocessing / Re: MLVProducer: [v3200]
« on: July 17, 2018, 12:15:05 PM »
Is there a way to preview my 60fps footage in slow mo (25 fps)?


I'm using an Eyefi mobi

Is there a better way to send/transfer photos from 5d3 to computer monitor in real time? 
I want the last photo to appear on the monitor screen till I take the new picture.
Does 5d3 works with Eyefi mobi in the way I've described? Maybe it can be done with usb cable or any other technology?

Modules Development / Re: Full-resolution silent pictures (
« on: June 05, 2018, 07:24:15 PM »
Is FRSP should give the same color and exposure results as in a regular Photo mode with cr2?
I tried the same setting and opened pics in ACR (sorry for poor quality).

With 0,3", f16, iso 320 - FRSP captures picture twice longer (about 600 ms) = 0,6".

My camera is 5d3 with expo override enabled. Should I change some settings to match closer?


Post-processing Workflow / Re: Adobe is garbage. Alternatives?
« on: May 28, 2018, 02:33:09 PM »
DaVinci Resolve?

So after further testing I found out that the 50/60 fps 3x3 is what is giving me problems with the Crane controls. When I switch back to 25 fps everything seems to be working fine.

Does it actually ML issue? Can you try regular Canon 720p 50/60 fps with Crane 2 without ML?

I keep hearing that you need to do more work in post with a 5D3-ML compared to other top-tier cameras, can you explain how the workflow is not as easy?

Another 2 cents which are not mentioned here:
You don't have an easy and real time preview of already captured material in your camera.
You have to load a file manager module and preview RAW video files with skipped frames or frame by frame, but not in real time.
Which is not really suitable for professional workflow. But if you're an enthusiastic independent video maker - you can live with this )).

Modules Development / Re: Full-resolution silent pictures (
« on: April 20, 2018, 11:01:45 AM »
Liveview is not exclusive to movie mode.

Oh, thanks! Now I remember that I did my last FRSP shoot with 5d2 and workflow was a little bit different. On my "new" 5d3 to go to live view in photo mode I have to press "Start/Stop" button  :) It was not obvious for me. Thanks for help  ;) ;) ;)

Modules Development / Re: Full-resolution silent pictures (
« on: April 20, 2018, 10:33:35 AM »
@Dmytro_ua: you should be in photo mode.

Wait a minute, now I'm even more confused..
In the Silent Picture description is said that "This feature only works in LiveView". When I'm in photo mode the mirror is down and for take a picture it should go up, so it couldn't be a silent picture anymore.
I'm sure I'm missing something stupidly simple  :-[

Modules Development / Re: Full-resolution silent pictures (
« on: April 19, 2018, 10:47:05 PM »
Hi! I didn't use silent picture FullRess for a year or so and forgot how to make exposure longer than 1/33. With expo override ON - I still can get only 1/25. My ExpSim seems to be locked to Movie mode. I don't remember if it always was locked..

But I'm sure I've made time lapses with 5-10 seconds exposure FRSP without any problems and now I'm stucked in settings. Please give me a hint (5d3).

I've found some info in comments from another video The author says that: "follow focus works very well with ML;)"

As you can see in description, he has the same Zhiyun Crane 2. Camera: Canon 5D mark III

I'll try to reach him via private message

Nothing works with ML and Crane 2 in liveview mode :(  Not even liveview itself

Thanks for information. I couldn't find any confirmation of this online. I was going to buy Zhiyun Crane 2 to use ML with it's follow focus feature, and now I have think over again.. This feature is really important for me   :( :(

Such a shame. Now I just have to manually start and stop recording with the button on the camera.

What about follow focus, does it work with ML?

Can you please tell more about new Zhiyun Crane 2 with ML. Does it perform all features with ML?

Maybe there's a better solution but did you try to lower the brightness of camera screen to match your exposure in post production?

Raw Video Postprocessing / Re: 60fps & AE, HELP!
« on: March 21, 2018, 01:03:09 PM »
At first I also started to use AE as I'm really good in grading photos with ACR. As you can grade only one frame I did it with Adobe Bridge (it was easier to browse through sequence looking for better frame). Then I applied this grading to all files and opened it with AE. Basic editing and export to PP. Slow, painful, awful workflow. The ONLY advantage - my beloved ACR.
Nevertheless, I'm really happy that I've spent time to learn how to grade in Resolve. The workflow and speed is perfect!

General Help Q&A / Re: Live View lag
« on: March 14, 2018, 09:19:27 PM »
What camera do you use?

Pages: 1 ... 7 8 [9] 10