Messages

26

Hardware and Accessories / Re: Supported 1000x CF cards for continuous RAW recording

« on: April 26, 2014, 08:44:53 PM »

lexar 800x 64gb
70mb/s in crystaldisc
66mb/s in movie mode with GD on, small hacks on
can record 1920x818/25 continuous, 1920x1080/25 for 8secs
..im saving to buy some good cards

27

Hardware and Accessories / Re: MustHD field monitors

« on: April 26, 2014, 04:28:32 PM »

how about the sync'ing delay when you turn on..or pressing record
also is the framing good with 5d3? Does it keep full res while recording?
cheers

28

Camera-specific Development / Re: Magic Lantern for 5D Mark III 1.2.3

« on: April 23, 2014, 10:07:20 AM »

29

Camera-specific Development / Re: Magic Lantern for 5D Mark III 1.2.3

« on: April 19, 2014, 06:50:51 PM »

its in the 1.2.3...load MLV module,restart and rec in MLV format (same with RAW module if u wanna rec in RAW)

30

Hardware and Accessories / Re: Komputerbay 1066x series just released

« on: April 15, 2014, 12:25:24 AM »

maybe you burnt this one too coz consistent speed @65 doesnt sound too right whatever the parameter lol those KB cards are building a career in ML forum...maybe ill w8 for the 1200 ones...for now i think the 1000s 64 are the most reliable and u wont get any better result with 1050,1066,1099

31

Camera-specific Development / Re: Magic Lantern for 5D Mark III 1.2.3

« on: April 05, 2014, 12:30:24 PM »

ok using raw and everything works ok...i had couple bad frames once with the early 31th build but couldn't reproduce and since then im with 17th build and np...we are ready for testing the 'real sensor upgrade'

32

Camera-specific Development / Re: Magic Lantern for 5D Mark III 1.2.3

« on: March 30, 2014, 05:22:42 PM »

better run a movie ML bench for your card so u get an idea of your card's mb/s
also check here http://www.magiclantern.fm/forum/index.php?topic=5472.0
i shot 1 time RAW 720p @50fps with np..best is to experiment yourself and see which settings are good for your purpose

33

Camera-specific Development / Re: Magic Lantern for 5D Mark III 1.2.3

« on: March 21, 2014, 06:31:42 PM »

a) I did lot of shots using .RAW
b) The problem start when I put OFF RAW - restart - and Use .mov for a long interview.
c) I put .RAW again, restart.
d) After that shot, the colours of videos appear divide for yellow, green, like a Warhol paint, with out TOO MUCH details.
RESTART. Skipping frames. Restart, Memory Hack On. Global Draw Off. And REC in that conditions.

so the problem appears with the RAW files (the 2nd time after switching from h.264 to RAW again)?
have you gone through your steps again and had same result?
what does the frame looks like ? (upload a pic if you can plz)

34

Camera-specific Development / Re: Magic Lantern for 5D Mark III 1.2.3

« on: March 16, 2014, 03:43:34 PM »

wooooohoooooo...first test seems to be working very good.
you guys are legends .many thankssssssss

35

General Chat / Re: 5dmk3 write limit

« on: March 12, 2014, 06:16:54 PM »

Thx for reply..although im not talking about the cf speed but the camera's writing speed (sry i didnt clarify that as i should)
and the guys over komputerbay are quite sure that 5dmk3 is limited to 100mb/s max
.............................................................................
Komputerbay Tech Support
To Me
Mar 11 at 2:37 PM
 
Hello,
 
We recommend the 1000X - is faster than any of the ML based cameras. The 1050X is even faster but you will not be able to take advance to the speed as the 5DM3 is limited to 100MB/s:
 
We suggest you use settings recommended by this manual for the 5DM3 for the ML build/s:
http://www.dvxuser.com/guides/ml_raw_guide_5DIII_full.pdf
 
ML camera limitations:
http://a1ex.magiclantern.fm/bleeding-edge/raw/raw-chart.png
 
Please ensure that you are using these cards with a true UDMA7 compatible USB 3.0 card reader. If these cards are not used with UDMA7 compatible devices, they will eventually corrupt the card/data on it. We recommend investing in a Kingston USB 3.0 FCR-HS3.
Thank You
Tech Support
CS
............................\Komputerbay Tech Support
To Me
Mar 11 at 9:38 PM
 
Hello,
 
Rest assured the limit is 100MB/s for the 5DM3.
 
Thank You
Tech Support
CS

36

General Chat / 5dmk3 write limit

« on: March 12, 2014, 11:05:29 AM »

i couldn't find that info on official specs of the camera but some say its around 167mb/s..although the tech people in komputerbay told me that they are sure the limit is @100mb/s...anyone knows?
(iv mailed canon but i haven't got a reply on this)

37

Hardware and Accessories / Re: RAW REC - LEXAR CARDs - W/R SPEED

« on: February 27, 2014, 02:14:13 PM »

HI all..anyone has tested the lexar 64GB 800x in movie mode? I wonder what resolution this card can handle in ML..