Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - jacktortuga

#1
many thanks! worked just fine  :)
#2
General Development / Re: mlv_dump on Mac OSX
February 12, 2014, 09:23:42 PM
Quote from: marekk on November 04, 2013, 09:59:49 PM
https://www.dropbox.com/s/497bvdlcsd7p160/mlv_dump.zip

Downloaded that from dropbox and used the "drag to termiinal method" worked on some files on my first batch, some didnt, i was able to convert 2 out of 5 MLVs.

Now I always get the error "missing header files"  and cant convert anymore.

Any advice?  Using mavericks and a 60D if that helps
#3
nice, ive been shooting it just now, then converted it via mlv_dump and its looking good!

BTW did you use VisionLog? cant seem to work on my lightroom 5 so i can make images flat.
#4
help guys, i tried downloading the vision log and copied it my CameraRaw folder. i opened lightroom 5 but it still wasnt there at the Camera Calibration.
tried restarting lightroom multiple times with no avail. it wont load.

Im using a Macbook Pro 2011 with a Lightroom 5
#5
Raw Video / Re: 60D RAW video - it's working !!!
February 11, 2014, 08:57:20 AM
Quote from: jimharrison.film on January 30, 2014, 11:30:38 PM
Here's my first proper Raw Video with the 60D. The town I live in floods every year so I thought I'd capture it:


Great job man! whats your lens and workflow?
#6
Raw Video / Re: 60D RAW video - it's working !!!
February 11, 2014, 08:44:12 AM
i think what holtwebb and numarex means is they already installed the 2.3 stable release successfully but they cant find the raw in movie mode.

to use raw you have to (as of my understanding and experience)

1. download the Nightly Builds download it here http://builds.magiclantern.fm/ choose the 60D version.
2. then extract those files to you desktop.
3. select all and drag those files in your 2.3 stable release SD card. if it says theres a existing files like that and you have to overwrite, then overwite.
4. load your SD card to the 60D and at the ml menu (trashcan button) go to modules, browse and find raw_rec (hit set to load the raw module)
5. it will say will load at next reboot. so turn off the camera and wait for like 5 secs then turn it on.
6. in ml menu go to video recording and you will see its there, you just have to enable it and modify your resolutions etc.
7. jump for joy! just dont drop your camera. congrats your ready to shoot raw!



#7
Raw Video / Re: 60D RAW video - it's working !!!
February 10, 2014, 07:30:14 AM
Tried shooting in 2.35:1 resolution to get that feature film look, and experimented in resolutions. So far Im kinda disappointed in my Sandisk 32gb 45mb/s card. Should've waited for that 90mb/s!

Can shoot for about 100+ frames or about 4-5 secs. Im using the 1728x736 resolution so i can use the camera sensors full width, coming from a full frame user (i saved up for a full frame camera for my photography, a Canon 6D) i want to maximize the width since the 60D is already a crop sensor and its already a tight shot in a Sigma 35mm.

4-5 secs can do for now shooting landscape scenes and whatnot, hope i can get that 90mb card soon for longer takes.
#8
Raw Video / Re: 60D RAW video - it's working !!!
February 08, 2014, 04:44:40 PM
Quote from: dmilligan on February 05, 2014, 01:56:27 PM
If you have the stable installed, all you need to do is download the nightly, unzip it, and replace all the files on the card with the new ones from the zip.

All the 'installer' does is set a flag in the camera that tells it to boot up from the autoexec.bin file on the sd card. Once it's set all you have to do is update the files on the card.

Don't use marekk's builds, the nightlies are much more up to date.

Please don't expect not to have to spend a tremendous amount of time reading and learning about this. You don't need to read this entire thread in particular (but there are others you should), but if you want decent results, you're going to have to do your research. This is a complicated hack, that is difficult to install, dificult to setup, difficult to use, and difficult to post process. It is not something for people who don't have a significant amount of time to read about it.

thanks for the help dmilligan i got it to work!

BTW im now experimenting with RAW resolutions using a Sandisk 32gb 45mb/s, would've bought the 95mb/s but it was already sold out during the sale at the Photoworld Asia sale last week here in the philippines. Thanks again man!
#9
Raw Video / Re: 60D RAW video - it's working !!!
February 05, 2014, 08:53:11 AM
My first post! Great vids guys, Bought Canon 60d yesterday as a back up camera and i was hoping to shoot raw on the 2.3 stable version, but sadly RAW shooting wasnt included yet. (Noob)

Anyway just to clarify things, the version that has RAW capabilities is in the nightly builds right? Theres 48 pages here and i cant read em all :D

Edit:

Or should i use this file uploaded by marekk: (wondering if its the latest as of feb 2014)

Quote from: marekk on May 24, 2013, 11:24:26 PM
Pls use full ML package from this link:
https://www.dropbox.com/s/u305oejjhm130k0/60d_raw_full.zip

you probably installed ML stable release and some files are missing.

And as ive said ive installed the stable 2.3 already, should i first uninstall that version in my 60D first before indtalling this version. Sorry for the stupid questions, ive just discovered ML recently. Thanks!