Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - andy kh

Pages: 1 [2] 3 4 ... 22
26
Hello @masc

Can we have Aspect Ratio option in exporting settings ? or as example I shot 1736x976 16:9 MLV video , in exporting settings I adjust resizing to 1920x816 to have in the end 2.35:1 Aspect Ratio but it's not working in that way it compress the height and give 16:9 video needs to be un-stretched to have the correct 16:9 same as 5x3 mode , instead of compressing the height or Binning the pixels vertically; it will be great if it works by cropping the top and bottom parts . .

So can we have it ?

already requestd ths feature by me some months back but no possitive reply so far

27
General Chat / Re: BMPCC 4K
« on: August 04, 2019, 05:04:29 PM »
Just shot a shirt film on bmpcc4k - amazed by the low light. i thought the crop would be a deal breaker but with a relatively cheap booster we really didn't lose significant sharpness. Battery life is kind of a bummer but there are some good workarounds available.

my 550D and 650D were amazed in lowllght until i bought a 70D. my 70D was amazed until i bought a 5D mark III. your BMPCC 4k wil not be amazed once you compare with a 5D mark III

28
General Chat / Re: BMPCC 4K
« on: August 04, 2019, 03:47:11 PM »
micro four third a big no for me.i am a owner of both 5d mark iii and bmpcc(not 4k) micro four third very bad in low light and too much crop factor.  i test my camera only once and never touch it again for the last couple of years.i choose to use my 650D instead of bmpcc for a short film some years back

5D III a professional stil camera, its a full frame much better in low light, better battery life

29
Hey Quick Question. Is there any way to 'Undo' in MLV APP?

Like I adjusted a shadows slider but I want to undo the adjustment

Double click the shadows slider

30
fastastic. the white balance picker works great and the scopes looks amazing and easier to work with now

31
Camera-specific Development / Re: Canon 70D
« on: July 21, 2019, 06:44:01 AM »
care to elaborate? I got a cheap M, but miss the DSLR form factor and would like better AF since I'm a single shooter coming from street photography.

af is really good. i also bought one because of this feature. there are some ML features missing in this camera. i dont kno if those missing features are important to you or not  and i get some terrible moire and aliasing. i am not sure if its because of the lens i use which is tamron 17-50mm f2.8 non VC

32
Camera-specific Development / Re: Canon 70D
« on: July 18, 2019, 07:30:51 PM »
Im a 70d owner and i would highly suggest you not to buy 70D if you already own a M.

33
Share Your Videos / Re: La Palma Island - with EOS 5D2 and EOS M
« on: July 16, 2019, 07:52:50 PM »
Superb👍👍

34

35
General Chat / Re: Fake SanDisk Extreme pro 64GB 95MB/S - Help needed
« on: July 11, 2019, 07:14:55 PM »
when i bought few years back it was in a packed and include a serial number to activate sandisk data recovery tool

36
General Help Q&A / Re: RAW error on 600d/t3i
« on: July 08, 2019, 10:09:42 PM »
reset your camera settings and ml settings

37
Share Your Videos / Re: 12bit lossless 60fps
« on: July 05, 2019, 10:43:29 AM »
it was a  quick test. i shoot everything in 20 mins so some shots are not even focus properly. you know its 40°c here in india so not possible to go out and shoot. as it was already late evening i shoot at high iso. i go up to 4000 for most of the shots.
i did color grading for some clips in premiere pro. i took half an hour to edit so it was a quick grading

im not sure about the file size. i shoot in 12 bit lossless as it gives me more recording time with my slow card which is 1000X wise advance. as soon as i hit the record button i get little greenish in the display

38
Share Your Videos / 12bit lossless 60fps
« on: July 04, 2019, 02:13:09 PM »

use danne's crop rec 4k  29jun19 build

39
General Development / Re: LiveView Crop Registers
« on: July 03, 2019, 06:46:25 PM »
Very interesting

40
done a quick test so far so good
great job danne

41
How do you import 1080p raw in premiere? I thought premiere can only "see" in 8bit anyway.

it supports cdng. lots of options to convert to cdng. best i think the best is mlvfs. ooen the folder where your cdng is. click only the first dng and drag and drop in premiere pro. now you can start editing like you edit any other format. premiere pro wil play cdng in realtime so its so much easier to cut

42
i use premiere pro and resolve workflow. premiere pro plays 1080 raw in realtime but not in resolve so i cut in premiere pro and grade in resolve. rendering is way faster in resolve  in my 10yr old laptop with just 2gb graphic card

43
Doesn´t work at all or work and gives compression errors? I need my camera I believe...
gives compression errors.

44
no it doesnt work

45
yeah 2nd Apr if i remember from your branch/build. it works perfect
im on 1.1.3
 my settings are
pal in canon menu
720p@50fps
activate crop mode 1920 50/60 3X3
 edit : i set to 1920X818 spect ratio 2.35:1
14bit lossless
real time

46
New uploads for the 5DIII:
https://www.magiclantern.fm/forum/index.php?topic=23041.msg216899#msg216899
stil the same problem. sometimes it works fine. the problems occurs after recording 3/4 times

About your screenshot it´s related to compression handling in mlv_lite.c. Something is affecting it so it correctly reports files are getting corruption issues.
i get som corrupted pink frames

i dont understand why there is no such problem with your 2nd Apr build!!i have been using it for so many days and i havnt found any problem so far

47
i stil cant shoot in 50fps with your latest build. 60fps is fine. i have been shooting 60fps for the last couple of hours without issue. just tried 50fps this evening and i get some error which is very strange. if i restart the camera canon setting jumps to ntsc from pal. i tried setting to pal again and shoot at 50fps and whenever i get this error i try restarting and jumps to ntsc

http://ibb.co/ygDJBJt

48
just install this new build and tried shooting some slomo video. working fantastic so far.
thank q so much for this new build danne

49
Did you turn on sound in modules?

50
Raw Video / Re: 6D and 5d mark 3 video options wit ML???
« on: June 11, 2019, 06:53:29 PM »
If money is not an issue go for 5d mark iii as it is the only camera with minimal moire better buy the right camera. I started with 550d ML and since its write speed is only 20 mb/s i upgraded to 650d which has the write speed of 40mb/s but i got so disappointed with the focus pixel so i upgraded to 70d but 70d has no fps override and suffer from moire so now i finally upgraded to 5D mark iii.
If you can buy 5d is the best..all other camera has some issues

Pages: 1 [2] 3 4 ... 22