Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - andy kh

#101
Quote from: Danne on May 17, 2019, 09:20:32 AM
THanks. Heavily overexposed highlights, wouldn´t expect any info left in those areas. Do you mean the problem only occurs on the 70D?

this was made just for testing purpose and show you. i dont get the pink highlight  after pulling all the way down the exposure if its shot in 14bit. problem occurs only in 10bit and 12 bit lossless getting pink highlight
#103
highlight recovery/reconstruction dont work in 10bits lossless and 12bit lossless atless in 70D. it works only in 14bit lossless

10bit lossless




12bit lossless




14bit lossless


#104
Quote from: ShootMeAlready on May 16, 2019, 06:02:48 AM
Using "magiclantern-Nightly.2019Mar15.70D112_crop_rec_4k_mlv_lite_lossless_fps_override_experimental"
Was able to get 1920 @ 2.35.1 59.9p 12bit raw lossless continuous in 5X.  Global was off, generally.  Extremely slow playback (1minute clip takes about 5 minutes).

i dont think you can shoot 60fps in 5X mode. no matter whatever your setting is in canon menu when u zoom in 5X it wil change to 30fps
#105
Quote from: ShootMeAlready on May 15, 2019, 03:37:00 AM
to change the write speed. Also the Timer , will not take 5X back to 23.9 fps.

first go to 5X and set to your desired fps

#106
Quote from: ShootMeAlready on May 15, 2019, 03:37:00 AM
I only find fps override on exper build,
magiclantern-Nightly.2019Mar15.70D112_crop_rec_4k_mlv_lite_lossless_fps_override_experimental

The problem is that at 2.5k it only runs for 5s, or 150 frames.  There is no overclocking ???

you read what ArcziPL just said. you have to go to debug in Ml menu scroll down...
you wil see something like this  "MAY CAUSE DATA LOSS" with "160MHz fixed
press ok to activate.
#107
@Arczipl  i did exactly wat you said but it didnt work. I think it crash twice if i remember
I replace the uhs sd and the lua in modules and add his script and it works flawlessly. I need not activate manually everythime i start my camera
#108
Quote from: Danne on May 14, 2019, 02:42:31 PM
Think he goes into advanced and change the A-timer. Try that.
yeah danne is right. you can lower to any fps by changing the timer A

i wish timer B also works
#109




another example of 2.8k continous 10bits lossless 23.989fps
#110






@OlRivrRat these are my settings. i can go little higher than 2.5k and shoot continous
just to show you i recorded for 10 mins
i have to turn off crop rec in modules otherwise i always get realtime preview
#111
https://bitbucket.org/ArcziPL/magic-lantern/downloads/magiclantern-Nightly.2019Mar15.70D112_crop_rec_4k_mlv_lite_lossless_fps_override_experimental.zip

My settings are 12bit or 11bit lossless@ 23.989 with uhs sd hack enable and i dont use the sd uhs hack from this build.
As i have mention fps override is little tricky you need to adjust with timer A. I wil try to make a video tutorial tomorow as im away from home atm
#112
As of now i hv two builds in two different cards. One is build by Arczipl. This build doesnt seem to work the uhs sd hack in my initial test so i replace with danne's ush sd hack that run with lua script. It give me about 58mb/s write speed

And one important thing is setting the fps override to your desired fps is little tricky in 70D. You cant increase but decrease. After setting the desired fps, i need to adjust it wit timer A otherwise it wil keep jumping to original every few seconds.
I have another build by danne but i need to do more test for this build
#113
Try 14bit or 12bit lossless raw instead of 10bit. You wil be able to record continous.
You can shoot 2.5k continous in 5X with the ush_sd hack
#114
no need to apologize. u hav done a fantastic job
thanks for this wonderful App
#116
vid stab dont work at all after export ready i could not find any video in the folder if i check enable vid stab
#117
Quote from: Farangi on May 05, 2019, 07:00:08 PM
Also, I have no experience whatsoever with autofocus. It strikes me as something that is great in theory but isn't likely to work well in practice. Can dual pixel autofocus be trusted to work well or is there something else I should be looking for?

you can trust dual pixel auto focus 100%. its the revolution. its got in all canon professional cinema camera. when there is dual pixel auto focus you neednt look for anything else

edit: i have been thinking of buying a 5D III and sell my 70D but i dont wana miss the dual pixel auto focus and i dont want to keep two camera  as i am not a professional photo/videographer
#118
Quote from: Felipe on May 05, 2019, 03:29:02 PM
On this shot, I went with 2x bit rate giving me around 90 MBS, and is noticeable how the grading possibilities increase

you wil not notice. its the same. if u want to grade shoot in raw
#119
Quote from: alpicat on May 03, 2019, 09:20:39 PM
@andy kh  a I guess it should work though if it's 3x3 line skipping. Also there's a VAF filter specifically for the 70D which helps.

im guessing the same that it should work in3X3 sampling 720p mode and im aware of the vaf for the 70D but i think its expensive and not worth to buy a new one
#121
80d has  no ML supported yet. 70D is the only ML supported camera that has dual pixel auto focus in video mode and i really love it but if you shoot raw 60fps 5d iii is the only camera to go. All other camera suffer ftom moire and aliasing.
#122
Wil this vaf work in 720p 50 fps 3X3 sampling? If so i want to invest in it. I love slomo video and i have been thinking of buying a used 5d iii at the same time i love my 70 d's auto focus so if the vaf works in 720p 3X3 sampling i wil buy a vaf instead of buying a 5d iii
#124
thank you guys for your advice i have decided to let it go. i think 400k is too much. i will go to a local shop next month and check out there. i contacted a shop and he says he has got many 5d III body available. i am also considering buying a vaf filter for my 70D
#125
I got a deal for 800$.can anyone advise me if i should look for  other with less shutter count. I think its time for me to upgrade to 5d iii to get rid of moire n aliasing