Messages

[[103] COMPRES_TASK: TASK WARNING: Free=164 Used=3932]

Trying to reproduce the live view disconnection, I let camera on... This time get this message:
CTRL SRV Stack Overflow free=84 Used=163008176
Camera off.
Camera on.
I can record continuous 1920x960 50p 3x3
Camera remains on.
Suddently get this message in top of screen (in red letters):
[103] COMPRES_TASK: TASK WARNING: Free=164 Used=3932
Camera off.
When I boot camera again, I get this message full screen:
ML ASSERT: 0 at mlv_lite.c:2006 (compress_task), task compress_task vv:1 mode:3

srm_malloc_suite(1)...
srm buffer #1: 48600064
srm_malloc_suite(f1408)
Resolution changed: 2080x1587 -> 2080x961
Black level: 2047

Compressed size higher than uncompressed - corrupted frame?
Please reboot, then decrease vertical resolution in crop_rec menu.

ML ASSERT: 0 at mlv_lite.c:2006 (compress_task), task compress_task vv:1 mode:3

I didn't change any resolution... In crop_rec menu it remains 1920x960.
I'm posting all my troubles... I have no idea if it is useful or not. If not, I will stop posting, just let me know 

Were you using a HDMI monitor? I didn't test this configuration yet.

Yes, a Zacuto EVF... It can be the problem?

Quote from: pc_bel on Yesterday at 10:13:46 AM

    ML ASSERT:0at mlv_lite.c:1935 (compress_task)


This one indicates frame corruption, and should also print this (unless obscured by other messages):
Code: [Select]

                printf("\nCompressed size higher than uncompressed - corrupted frame?\n");
                printf("Please reboot, then decrease vertical resolution in crop_rec menu.\n\n");

Now with new April4th build, yesterday problems are gone. Testing 1920 50/60 3x3. Camera boots every time I turn on as expected... WAIT A MOMENT !!!

While I was writting this post with camera on, I've heard the camera disconnect live view and connected again. On screen find for a moment a error message. I didn't have time to read it, just "created a LOG file" or something similar.

This is the LOG:

Wed Apr  5 11:31:33 2017
      0:    15.149 [STARTUP]
K285 ICU Firmware Version 1.1.3 ( 6.9.4 )
      1:    15.177 [STARTUP]
ICU Release DateTime 2012.05.16 14:14:46
      2:    16.597 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    16.886 [SEQ] seqEventDispatch (Startup, 0)
      4:    16.930 [STARTUP] startupEntry
      5:   129.073 [SEQ] seqEventDispatch (Startup, 1)
      6:   129.148 [STARTUP] startupPrepareProperty
      7:   141.147 [SND] Seq LPC fin
      8:   142.415 [RSC] hMemoryQueue (0x6A0010) hStorageQueue (0x6C0012)
      9:   144.775 [RSC] MemoryStatusMasterResultCBR
     10:   188.740 [MRK] MRK_RegisterSpaceNotifyCallback
     11:   188.883 [MRK] MRK_RegisterSpaceNotifyCallback
     12:   188.935 [FM] FM_RegisterSpaceNotifyCallback
     13:   189.503 [JOB] InitializeJobClass (ID = 858, Num = 13)
     14:   196.161 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     15:   199.904 [JOB] InitializeInnerDevelopJobClass (ID = 858, Num = 16)
     16:   199.946 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     17:   199.981 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     18:   200.020 [JOB] InitializeHDRShootJobClass ( Num = 16 )
     19:   200.053 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 33 )
     20:   200.321 [TERMINATE] SHUTDOWN init comp
     21:   200.429 [TERMINATE] Abort init comp
     22:   202.132 [STARTUP] startupPropAdminMain : End
     23:   209.359 [FM] fmPrepare : Completed
     24:   209.511 [SEQ] seqEventDispatch (Startup, 2)
     25:   209.884 [SHTRD] [MNAV] MEMNAVI_Initialize
     26:   210.049 [SHTRD] [MNAV] MEMNAVI_SetMemoryMap: 1
     27:   211.874 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     28:   247.456 [SEQ] seqEventDispatch (Startup, 3)
     29:   249.164 [MC] PROP_GUI_STATE 0
     30:   250.138 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     31:   250.286 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     32:   251.295 [MC] regist master CardCover
     33:   253.856 [PRP] M:98 F:97 L:0 P:32 T:7
     34:   254.010 [STARTUP] update coded version.
     35:   254.110 [STARTUP] internal version 06:09:04:98:97:00:32:07:3c:05:d0:d0:d0
     36:   259.367 [STARTUP] startupPrepareDevelop
     37:   262.974 [PROPAD] Done Rebuild Tune
     38:   264.107 [MAC] MAC_Initialize
     39:   264.479 [MAC] K_BOARDID4
     40:   264.521 [MAC] K_BOARDID3
     41:   264.555 [MAC] K_BOARDID2
     42:   264.586 [MAC] K_BOARDID1
     43:   264.757 [MAC] Key=0x0 Board=0x0 Body=0x734bbf81
     44:   277.644 [SHTP] Regist RPC Handler Master ALO
     45:   281.440 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     46:   393.855 [MR] mvrChangeAckCBR : Video - Mode=0, Type=1, Rate=50, GOP=1
     47:   393.981 [MR] mvrChangeAckCBR : Sound Manual(C=2,R=48000,B=16)
     48:   394.008 [MR] mvrChangeAckCBR : AE_MODE_MOVIE(3)
     49:   394.024 [MR] mvrChangeAckCBR : ISO(104)
     50:   394.178 [MR] mvrChangeAckCBR : MOVIE_REC_VOLUME(L:20 R:20)
     51:   394.228 [MR] mvrChangeAckCBR : WindCut Off
     52:   394.333 [MR] TimeCode Base:11526,11,530583872,0
     53:   394.378 [MR] TimeCode Mode:1
     54:   394.424 [MR] TimeCode DropFrame Mode:0
     55:   394.468 [MR] TimeCode Disp Mode:0
     56:   394.503 [MR] PROP_FILE_PREFIX:8W1A
     57:   394.534 [MR] PROP_USER_FILE_PREFIX:PAU_,
     58:   394.561 [MR] PROP_USER_FILE_PREFIX:PAU,
     59:   394.588 [MR] PROP_SELECTED_FILE_PREFIX:PAU_,1
     60:   402.263 [LVCOM] LiveView Gain Table Ver0.4
     61:   403.395 [HPC] ReserveHPCopyChannel (1, 116)
     62:   411.083 [MR] encdrwrapHPCopyAsyncCBR
     63:   412.885 [LVGMT] PROP_TEMP_STATUS : STATUS_NORMAL
     64:   418.280 [CAPD] LiveView Gain Table Ver0.4
     65:   421.293 [LVCOM] InitializeLiveViewDefectDetection
     66:   421.798 [LVCOM] ExecuteDefectMarge Start
     67:   421.882 [LVCOM] ExecuteDefectMarge1[0x41dd9b00:61440]
     68:   423.164 [LVCOM] A:[59] B:[9040]
     69:   427.618 [LVCOM] ExecuteDefectMarge2[0x41de8b00:61440]
     70:   428.697 [LVCOM] A:[35] B:[7713]
     71:   432.633 [LVCOM] ExecuteDefectMarge3[0x41df7b00:32768]
     72:   435.697 [LVCOM] ExecuteDefectMarge End
     73:   436.838 [LVEPP] [REMO] Jpeg 16:9 PosW: 0 PosH: 300
     74:   440.914 [PROP_AF_ASSIST_BEAM_FIRING] 0
     75:   441.074 CurrentMedia = 2
     76:   443.927 [STARTUP] startupPrepareRemote
     77:   445.087 [AUDIO] RegisterCBRSDIOCableConnect
     78:   452.462 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     79:   463.393 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     80:   463.438 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     81:   463.475 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     82:   463.531 [RMT] PROP_WFT_SYSTEM : 0
     83:   463.961 [PTP] PSI UnlockTransImg : Trans List is NULL
     84:   463.995 [PTP] PSI TarminateTransImgList : SessionTarget [1]
     85:   464.020 [PTP] PSI TarminateTransImgList : Trans List is NULL
     86:   464.133 [PTP] PSI UnlockTransImg : Trans List is NULL
     87:   464.158 [PTP] PSI TarminateTransImgList : SessionTarget [10]
     88:   464.180 [PTP] PSI TarminateTransImgList : Trans List is NULL
     89:   464.259 [PTP] PSI DisconnectViewFinder
     90:   464.763 [PTP] PROP_SCREEN_SAVER 0
     91:   464.926 [PTPCOM] SetPtpTransportResources:0,323a
     92:   465.189 [PTP] PSI UnlockTransImg : Trans List is NULL
     93:   465.221 [PTP] PSI TarminateTransImgList : SessionTarget [10]
     94:   465.242 [PTP] PSI TarminateTransImgList : Trans List is NULL
     95:   475.488 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     96:   786.917 [SD] sdSendOCR: 1.8V Signaling Card
     97:   789.340 [SD] sdSendOCR: Hi-Capacity Card
     98:   795.978 [SD] CARD CAPACITY is 15193Mbyte( 31116288Sec )
     99:   812.798 [SD] SD_GetAccessMode=3
    100:   812.816 [SD] Set Hi-Speed Mode( 48MHz )
    101:   821.024 [FSU] fsuGetPart: Block(8192, 31108096, 31116288)
    102:   862.189 [FM] FileNo (DriveNo = 2, 0 <-> 157)
    103:   862.304 [FC] _FC_OpenCatalog : wNumOfDir 1
    104:   867.175 [MRK] MRK_Initialize
    105:   867.760 [MRK] MRK_PrepareMrkFileObject
    106:   870.803 [SEQ] seqEventDispatch (Startup, 4)
    107:   870.977 [DP] DP_Initialize()
    108:   871.656 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
    109:   871.694 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
    110:   871.788 [DP] Dp_SetPD_RegistApi Prev:0 New:0
    111:   872.148 [DP] PROP_CONNECT_TARGET [0x00000000]
    112:   872.268 [DP] RD_Cancel No Issue
    113:   872.501 [DP] [GYO]DpFunctionList[0x10117fff]
    114:   872.612 [DP] X FreeMem Address[0x00000000]
    115:   876.710 [DISP] HPD before InitializeDisplay !!!
    116:   876.961 [DISP] [ME] PropMgr (0) [SlaveResultCBR] (S_OFF)
    117:   877.080 [DISP] [ME] PropMgr (0) [ChangeCBR] (S_OFF)
    118:   877.103 [DISP] Display_flag = 1
    119:   927.579 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    120:   927.638 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    121:   954.964 [DP] DP_RegisterCBR() Id=1 Count:12
    122:   955.003 [DP] DP_RegisterCBR() Id=2 Count:12
    123:   955.030 [DP] DP_RegisterCBR() Id=4 Count:12
    124:   964.382 [GUI] MainEventHandler PROP_QR_DIDNOT_EXECUTE(0)(0)
    125:   966.664 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    126:   993.693 [LVGMT] Is PROP_OUTPUT_TYPE Real??[H:1][V:0][O:0]
    127:  1001.225 [MR] mvrChangeAckCBR : Video - Mode=0, Type=1, Rate=50, GOP=1
    128:  1002.062 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    129:  1003.208 [LVGMT] Is PROP_OUTPUT_TYPE Real??[H:1][V:0][O:0]
    130:  1004.069 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    131:  1005.200 [HDMI] HDMI CEC Initialize
    132:  1006.225 [MR] mvrChangeAckCBR : Video - Mode=0, Type=1, Rate=50, GOP=1
    133:  1007.428 [GUI] ERROR ***** ConvertHdmiVideoCodeToGuiDisplayType unknown Type(0)
    134:  1007.973 [HDMI] HPD ON
    135:  1007.997 [HDMI] ConnectHDMI
    136:  1008.023 [HDMI] InitializePortForHDMI
    137:  1008.049 [HDMI] ActiveHDMIDevice
    138:  1008.072 [HDMI] I2C_Init
    139:  1008.162 [HDMI] Pana_Init
    140:  1010.391 [SEQ] seqEventDispatch (Startup, 5)
    141:  1010.413 [STARTUP] startupInitializeComplete
    142:  1010.499 [MC] cam event guimode comp. 0
    143:  1011.314 [MC] cam event guimode comp. 0
    144:  1012.443 [DISP] BrightnessControl from GUI 1
    145:  1013.765 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    146:  1013.799 [DL] PROP_DL_ACTION (1)
    147:  1018.304 [MC] PROP_GUI_STATE 2
    148:  1021.169 [MC] PROP_GUI_STATE 2
    149:  1022.224 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    150:  1023.042 [MC] PROP_GUI_STATE 2
    151:  1023.944 [GUI] IDLEHandler START_WARNING_LENSLESS_MOVIE_MODE
    152:  1024.027 [MC] cam event guimode comp. 2
    153:  1034.709 [WINSYS] Zlib maxsize update 884
    154:  1034.763 [WINSYS] Zlib maxsize update 1396
    155:  1060.186 [GUI] IDLEHandler START_WARNING_LENSLESS_MOVIE_MODE
    156:  1060.259 [MC] cam event guimode comp. 2
    157:  1096.103 [GUI] IDLEHandler START_WARNING_LENSLESS_MOVIE_MODE
    158:  1096.175 [MC] cam event guimode comp. 2
    159:  1118.924 [FA] ChangeCBR(ID=0x8003000a)
    160:  1119.598 [FA] RequestFromCheckData
    161:  1119.866 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    162:  1128.724 [SEQ] seqEventDispatch (Startup) : End
    163:  1133.365 [HDMI] RESET_UNCOMPLETE
    164:  1136.719 [HDMI] RESET_COMPLETE
    165:  1148.561 [HDMI] KEY LOAD OK
    166:  1148.595 [HDMI] HOT_PULG_DETECT OK
    167:  1198.979 [HDMI] EDID_PREREAD OK
    168:  1199.001 [HDMI] Rx Sense is OK
    169:  1199.621 [HDMI] pfHdmiPbCBR Done
    170:  1253.694 [HDMI] TMDS Check

I was pretty sure that everything was going pretty well until this happened.

Hope it helps for developement...

Same again:

ML ASSERT:0at mlv_lite.c:1935 (compress_task), task compress_task
lv:1 mode:3
Magic Lantern version : crop_rec_4k.2017Apr03.5D3113
Mercurial changeset   : 7b0cb9532629 (crop_rec_4k) tip
Built on 2017-04-03 14:54:32 UTC by jenkins@nightly.
Free Memory  : 177K + 3923K

Need to pull battery, and then camera doesn't boot anymore

Hi,
I don't know if it will be useful or not...

Testing latest build (April 3th crop_rec) on 5D3 113, for now only this mode because is which I find more useful for me: 1920x872 50p 3x3 (aspect ratio 2.20:1) 14bit lossless.

Yesterday I was able to record without problems in continuous with normal preview, in color.

Today, with the same settings as yesterday, it has been impossible to boot the camera. In the SD card there are text files called ASERT, one for each boot attempt. In them the following appears:
ML ASSERT:0at mlv_lite.c:1935 (compress_task), task compress_tasklv:1 mode:3
Magic Lantern version : crop_rec_4k.2017Apr03.5D3113
Mercurial changeset   : 7b0cb9532629 (crop_rec_4k) tip
Built on 2017-04-03 14:54:32 UTC by jenkins@nightly.
Free Memory  : 173K + 3807K

If I change SD card for another with 2017Feb11th 5D3113 (crop_rec proxy) all works again.

Hope it helps!!

I've erased all in SD card and copied clean April3th Crop_rec_4K build.

All works ok again like yesterday.

[ML ASSERT:0at mlv_lite.c:1935 (compress_task), task compress_tasklv:1 mode:3Magic Lantern version : crop_rec_4k.2017Apr03.5D3113Mercurial changeset : 7b0cb9532629 (crop_rec_4k) tipBuilt on 2017-04-03 14:54:32 UTC by jenkins@nightly.Free Memory : 173K + 3807K]

Hi,
I don't know if it will be useful or not...

Testing latest build (April 3th crop_rec) on 5D3 113, for now only this mode because is which I find more useful for me: 1920x872 50p 3x3 (aspect ratio 2.20:1) 14bit lossless.

Yesterday I was able to record without problems in continuous with normal preview, in color.

Today, with the same settings as yesterday, it has been impossible to boot the camera. In the SD card there are text files called ASERT, one for each boot attempt. In them the following appears:
ML ASSERT:0at mlv_lite.c:1935 (compress_task), task compress_tasklv:1 mode:3
Magic Lantern version : crop_rec_4k.2017Apr03.5D3113
Mercurial changeset   : 7b0cb9532629 (crop_rec_4k) tip
Built on 2017-04-03 14:54:32 UTC by jenkins@nightly.
Free Memory  : 173K + 3807K

If I change SD card for another with 2017Feb11th 5D3113 (crop_rec proxy) all works again.

Hope it helps!!

Hi AWPStar,

Still don't work for me H264 444 or 422 but anyway... Now I've find another problem.
When I import a group of MLVs (I tried with 10, 2, 20, 40...) and click on select task (Q) I can see all the files imported and I'm enable to copy and paste settings. But when I hit Render Queue MLVP crashes.
It says:
Name: MLVProducer.exe
Version: 1.0.0.2722
Time stamp: 58848898
Modul name: ntdll.dll
Modul Version: 6.1.7601.17514
Modul Time stamp: 4ce7ba58
Exception code: 00063c5b
S.O: 6.1.7601.2.1.0.256.48
Id: 3082
Info1: 4f04
Info2: 4f046842f0075f3ba41d3310a6c1a0ec
Info3: a669
Info4: a669910d5e42f99ddce6731568360e6f

So I can't do any batch render, just one by one.

Any recomendation?

Thank you very much.

Pau.

@a1ex
Thanks for your answer!

It's probably just the extra overhead.

Can I do something to avoid this and get 14bit+H264 continuous?... Changing to a small aspect ratio?

Everytime I turn on camera, I need to change prefered card to SD in Canon menu. A bit anoying...

Solved: set preferred card from ML menu to SD. As you said if I have a CF card in camera raw is saved to CF.
Thanks!!!

Tested: https://bitbucket.org/Dannephoto/magic-lantern/downloads/magiclantern-Nightly.2017Feb11.5D3113_proxy.zip
For me 14bit recording + H264 only about 30s. (CF Lexar 64Gb 1066x + SD-HC Transcend 16 Gb class10). Maybe due to a SD card not fast enought?
10 and 12 bit + H264 continuous.

Everytime I turn on camera, I need to change prefered card to SD in Canon menu. A bit anoying...

@dmilligan
Ok, I understand that the problem is before any "data rate". So the sensor is not able to read so fast. 

Sorry for start this...

Anyway, the actual 10-12-14 bit, crop mode, and now simultaneus H264 recording is amazing!!!!! Thank you for all of this!!!!

Hello,
I'm really excited for the continuos developement of Magic Lantern, and especially the last 10-12 bit and crop mode features. I'm really grateful for this.
For me (and sure for more people) 1080p is all I need (mostly web destination works), but allways hopping for a 50fps solution for slowmo. Now, thanks to all developers we have two options to get 50fps: squeezed one and the newer 3x3 binning. Both have his pros and cons.

I guess if getting 8bit recording, datarate can go down enought to get 1080p50 raw. I know you loose the benefits of 10-12-14 bit for post, but to have 50p without sqeezing and pixel binning will be a 3rd option...(?)

Maybe I'm totally wrong and datarate is not the only problem. In this case feel free to delete this post if you want.

Thank you very much.

I have a problem with MLVP 2722 Intel.
When I render a 10 bit mlv file in H264 422 or H264 444 I can see a *tmp file in the output directory (with the final size listed), but when it finish, the file dissapears and only remain on disk the audio file. In DNxHD it works ok, and in H264 420 is ok too (tmp file shows 0Kb untill render finish, and then it shows real size).

May be a bug? I don't know...

Thank you.

MagicLantern crop3x2015jan135D3113
Windows 7 pro.

Hi AWPStar,

any advice for my problems?

Thanks.

MLVP 2722 intel.

More testing same result.

H264 422 and DNxHD1080 work ok, but H264 444 or RGB don't work. Only audio file remains in disk.

Thanks RenatoPhoto!!!

But I don't see any tmp file remaining in disk. Now deleted all folder containing MLVP and copied again. Now works but still doing tests. I will post about it.

Thanks.

Now, after reboot, I can't open MLVP!!!!

Hi AWPStar,

I have a problem with MLVP 2722 Intel.
When I render a 10 bit mlv file in H264 422 or H264 444 I can see a *tmp file in the output directory (with the final size listed), but when it finish, the file dissapears and only remain on disk the audio file. In DNxHD it works ok, and in H264 420 is ok too (tmp file shows 0Kb untill render finish, and then it shows real size).

May be a bug? I don't know...

Thank you.

MagicLantern crop3x2015jan135D3113
Windows 7 pro.

Hi, thanks for this quick 10-12 bit version!!!!

I'm using 2699 intel version with exposure fix applied in 10-12bit crop rec 2016dec24-5d113.

When I open 10bit mlv in MLVP I get a 127 black level and I can see the image in computer screen ok. Then I transform to cinemaDNG. When I open cDNG in ACR I get a very very dark image with magenta highlights!. I'm doing something wrong or is it a bug?

Thanks!!!

@anDyIII
Yes, same for me (5DmkIII, 1.1.3). Magenta highlight clipping in MLRawViewer (allways) and now in cDNG's from raw2cdng 1.7.5. Not in raw2cdng 1.6.5

@AWPStar

Now with v2224 I can open mlv's. No more "out of memory" error!!!!!!

@pc_bel
Any logs?)
Probably this bag will be eliminated in new version.

Can you cut this new mlv with mlv_dump and sent to me. Or full file if you can.

@AWPStar

I've sended PM with link to mlv file.

Thanks.

@pc_bel
Any logs?)

You have log in reply #588

Sure!!! I can send you mlv... Just give me some time

Thanks!!!!

Hi AWPStar,

Again message error: Out of memory.

And I can't open any mlv from a 5D mk3. Tried in MLVP 2164 INTEL and MLVP 2183 INTEL.

In MLVP 1944: Run-time error '6': Overflow

Can I do something more?

Thank you very much.

Today I tried with a "old" (just 1 month old) mlv and it works, but with actual mlv's don't. I'm using same nightly build...
I don't understand...
Any tip, please?

Thanks.

I deleted all in data\idx but same error...

It works ok last week but now... This is second time with same problem. I installed mlvfs before the error. May be is this the problem?

Thanks.

Here it is:

MLVProducer alpha: build 1984


settings:
Verstion:0
First:7
greencorr:1
debayer:9
cslut:AdobeRGB
cspath:C:\Users\pau\Desktop\MLV&RAW\MLVP_2183\data\cs\AdobeRGB.cslut
author:noname
cr:noname
codec:1
awb:0
uff:0
upd:C:\Users\pau\Desktop\MLV&RAW\MLVP_2183\output
ld:C:\Users\pau\Desktop\MLV&RAW\MLVP_2183\data\luts
eld:
cache:1073741824
mem:2147352576
memavb:2029305856
prevewmode:0
scalemode:0
threads:4
lq:0
dsm:1
system timer:41560,03
Threads: 4
command line:

cmdparsing...
cmd:'""'
files:2



cmdparsing...
cmd:'"E:\01_PROJECTS\TT\Ritmica\TrofeoCarnaval\RAW\M31-1836x\M31-1836.MLV"'
files:2

E:\01_PROJECTS\TT\Ritmica\TrofeoCarnaval\RAW\M31-1836x\M31-1836.MLV
E:\01_PROJECTS\TT\Ritmica\TrofeoCarnaval\RAW\M31-1836x\M31-1836.MLV
opening...
E:\01_PROJECTS\TT\Ritmica\TrofeoCarnaval\RAW\M31-1836x\M31-1836.MLV
extension:.mlv
parsing...
file count:1
filelen:693932640
MLVI
MLVI: fc=191
---MLV: E:\01_PROJECTS\TT\Ritmica\TrofeoCarnaval\RAW\M31-1836x\M31-1836.MLV
Width: 1920
Height: 1080
Black level: 2048
White level: 15000
Crop: (0,0)-(1932,1290)
FC1=0
RTCI:
p=248
bc=44
fn=0
fc=1
fl=693932640
RTCI_2
FC2=0
err in 'ParseMLV'
Step 27
tp:RTCI
6 Overflow
err in 'OpenMLV'
Step 9
filename: E:\01_PROJECTS\TT\Ritmica\TrofeoCarnaval\RAW\M31-1836x\M31-1836.MLV
init buffer
init cache frame:1920x1080 fc=0  c=1073741824
err in 'ParseFile'
Step 3

Hi AWPStar,

Again message error: Out of memory.

And I can't open any mlv from a 5D mk3. Tried in MLVP 2164 INTEL and MLVP 2183 INTEL.

In MLVP 1944: Run-time error '6': Overflow

Can I do something more?

Thank you very much.