Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tjaja

Pages: 1 2 [3] 4
51
Hardware and Accessories / Re: Komputerbay 256GB 1200x Looking good =)
« on: February 20, 2014, 01:55:57 PM »
1080p30 continious should be ok with this one.

52
Reverse Engineering / Re: CMOS/ADTG/Digic register investigation on ISO
« on: February 19, 2014, 04:57:19 PM »
@ IliasG what is that program showing all those metadata entries?

53
Reverse Engineering / Re: CMOS/ADTG/Digic register investigation on ISO
« on: February 19, 2014, 04:21:12 PM »
Digital Photo Professional is showing a difrence in the highlights when I put values between 0 and 900 in exiftool.

-edit: it changes the color of the highlight somehow

Hmm the lower values desaturate indeed. No headroom to change colors afterwards.


54
Because my question hasn't been asked before, I'm guessing why this is marked duplicate.

Is it in duplicate because it is something ml don't touch? (log is something different off course:

http://www.magiclantern.fm/forum/index.php?topic=4545.0

Or are you guys already onto something here:

http://www.magiclantern.fm/forum/index.php?topic=10038.msg96847#msg96847


55
Hello folks,

1: can the picturestyle be modified incamera?

If so:

Request:

1 editing the gamma curve in camera like a equalizer.
2 a sort of ettr but specific to gamma points:
If the gamma point doesn't receive enough info it moves away by increasing of decreasing value etc

Thanks by advance

56
Raw Video (MLV) press Q >Scroll to: Status when recording None/Icon/Debug set it to Debug

57
What does the second card read out when u have debug on?
Mine for example has B:/dcimblabla/mlv14-000 idle

Like this

58
Have you tried Buffer Method 4 and CF only on 0 with spanning ON? That gives me between 90 and 100 (Graph shows 45mb average but thats not correct)

59
Share Your Videos / Re: Travel in Dubai and Oman: 5dmkIII raw
« on: February 15, 2014, 05:12:37 PM »
Beautiful images! Colors are not overdone but still very vibrant.

60
Will check it immediately for spanning:

EDIT:

Still not correct display: 1920 by 1280 24p shoots 1000 frames but display says:
Total rate 48 MB /s
m15blabla.mlv: 82 MB/s
m15blabla.m00: idle
CF only buffer OFF/ Buffer fill method 4/ card spanning ON/

Maybe a glitch of my camera, waiting for other reporters.

EDIT 2:
Found a glitch regarding SD/CF in mlv:
after I record a mlv the changed file size does not appear in the CANON format menu, but it does with RAW and h264 and photoshooting. I can acces the files though with the file manager module or mlv_play.

Example: i shot a MLV with no card spanning of 1GB to the CF card.

I go to the menu of canon(SET UP1->format card) and in the CF card only 160KB is used.(which is incorrect because the files exists on the card)

EDIT 3

Ok, the correct file size appears when shutting the camera off and on again. The glitch is only on mlv.

61
Share Your Videos / Re: Oh my deer - 5D Mark III Raw Clip
« on: February 11, 2014, 11:06:09 PM »
Amazing!

62
Nothing broken I guess: even though it says card idling its not.
On display while recording: Totalrate 45MB/s
A:/ 70MB - 90MB
B:/ idle

on 1080p30 with frame skipping enabled it is saving to the sd card. Test mlv of 14.8GB:
12 GB to CF
2.8 GB to SD


On build 11-2-2014 configuration: Memory hack ON/ Extra Hack OFF/buffer fill method 4/ CF-only buffers 0 /card spanning ON

formatted exFAT
LEXAR 1000X 32GB CF and Sandisk Extreme 45MB/s 32GB

63
too easy to miss....there is liveview after Q after all. Thanks
Edit - it even jumps to liveview auto..

64
General Help Q&A / Re: 650d Nightly unistall problem
« on: February 11, 2014, 06:25:21 PM »
Sorry, next time double will double check my info.

65
Hello guys,

since raw is possible its quite quiet around picture styles. Since I always have time to do "pre-grading" (shooting a cr2 on set, making a custom picture style and upload it in the camera. After that dial contrast or saturation to my like) I wondered if the following is possible:

With a custom button ( i suggest the dof preview button because it is not used in movie mode) as a hold button to trigger the RYB model which can be adjusted with the joystick on the 5d3 or something else.

Usefull or not? Can it be achieved?

66
General Development / Re: Easy Coding tasks
« on: February 10, 2014, 04:26:34 PM »
Ok minimal C skills, check. So if I tutorial and dummy book myself the basics I can help with the (superuberduper) easy stuff?
No need for linux knowledge? That would be great

67
If someone is experiencing the same thing I would also like to know. Clearly the card is not corrupted and I tried all the settings.

68
Thanks Rolfe!

69
Share Your Videos / First videoclip shot on 5d3 with ml and 550d with ml
« on: February 09, 2014, 06:06:45 PM »
Hello everyone,

A friend and I are both actors who were sick of waiting for a audition.
So we started a company to produce ourselves.
First project was a  video for a song.
I wrote a story to it, and asked the cast.
The friend of My, did the production Side and I did the directing.
Inspired by Russian film noir, a lil bit of expressionism I tried to work with As Much silhouette As possible. First shooting day we used a 550d of mine and because raw was not possible in normal resolution I made a custom picture style because i knew we didnt have grading head room.

The second shooting day i rented a 5d3 and ended up loving it so Much i bought one before the third and last shooting day. The cameraman warned me constantly that the iso was too high but i rather had the iso cranked up than spending a lot of money just to fill up the scene to get the same results minus noise.

The positive Side about being a Actor for 7 years is that you can ask the Actor you want and you can direct someone with less words.
The whole project costed 600 euro's: food on set, fuel costs for the actors and the one day renting the camera.


70
No luck from nightly 20-12-2013 till now.

71
Im trying to push it to the second card use: 1080P 30fps
with frame skipping allowed it doesnt use the second card, with skipping off it stops.

Here is another weird thing: When I use SD as preferred card from the card settings
recording to the sd goes perfectly but CF is idling. with 20mb/s
It is as if card spanning isnt allowed or something.

72
On the 5D3, will test older nightlies thanks. Just broke yesterday, but I havent dowloaded a nightly for two weeks so there is a starting point.

73
General Help Q&A / Re: 650d Nightly unistall problem
« on: February 09, 2014, 12:52:35 AM »
Quote
then crazy screen graphics and locks up.

Hopefully you removed your battery immediately or else its probably burnt.

74
General Help Q&A / Re: 650d Nightly unistall problem
« on: February 09, 2014, 12:50:54 AM »
Easy, remove all the files from the sd card. Don't update the firmware to uninstall it. That's is like changing your hair color to remove your hair.

75
Hello folks,

when using the MLV_rec module the card spanning option doesn't work anymore(did so a month ago)
From 1080p30 and up it's quite useful.

Tried the following:
Format the two cards to exfat
Format the two cards to fat32
Turn off CF only buffer, and cf only 1 etc
Tried the 4 buffer methods and off
-Varied record func+card/folder sel. from the Canon menu

When benchmarking CF+SD write from the debug Magiclantern menu both cards are working.
When putting mlv_rec on test mode it doesnt work( gives a avarage from the 2 cards, and with sd being idle it lower than cf only)

Anyone got a clue?

Pages: 1 2 [3] 4