Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Frank209

#1
Share Your Videos / MUSIC VIDEO: Akwasi - Pauline
February 14, 2014, 06:36:03 PM
Dutch rapper Akwasi's new videoclip.

Anyway:

Shot on 5dmk3 Magic Lantern RAW.   oh, and did some arkanoid in between shots.
Zeiss ZE lens-set.

editted by someone else. I just shoot.

#2
thanks!



note to self; stop being a noob.
#3
i can't get the vimeo link to embed.. How do i do this?
#4
Using Magic Lantern Raw on a 5d3.
photo / video
All shot with zeiss primes.

Additional photography from stock footage.

Edit done by the great Eelko Ferwerda, who is allso in charge of grading and stuff. I just shot the images.

#5
General Help Q&A / Re: Battery Question
December 24, 2013, 11:12:46 AM
Quote from: Pelican on December 22, 2013, 12:12:36 AM
You can't run the firmware update with a third party battery which not fools the camera...

Really? i've been using numerous different brands for the EL-P6 battery and i've never experienced any trouble what so ever.
Allthough the Canon's tend to keep their charge a bit better. I can update with any battery.
#6
General Help Q&A / Re: Ok... so this is not clear!
December 24, 2013, 11:08:24 AM
Quote from: ilguercio on December 24, 2013, 03:40:23 AM
Especially if you can't bother reading the manual, i'd say.
;)

;D

Mine works like a charm. But i can read.
#7
General Help Q&A / Re: normal raw shooting temperature
December 20, 2013, 12:03:04 AM
aaaw shoot. And i just wanted to bake lunch on that thing....
#8
Hardware and Accessories / Re: Dual Monitor
December 19, 2013, 01:17:49 PM
there are monitors with HDMI out / SDI out. Works like a dream. I use 5.6 inch TV logic VFM-056 WP  monitor and use an extra 17 inch monitor for clients/ director.

The tvlogic monitor is good, but quite expensive (about 1100 euro's, but it's american so it will probably be 1000 dollars)
The good thing is that it can get HDMI in and cross SDI out, that i use the most since all professional 17 inch monitors to my knowledge use SDI in. (i use an BT-LH1760 from panasonic for those occasions. Works great. Keeps the director/client on some distance of the cameraman/dop.)

For a second setup I have an Marshall V-LCD50-HDMI. Very nice. Not so expensive (500 euro's) and all the bells and whistles. Only HDMI in, so only a single monitor.
#9
General Help Q&A / Re: normal raw shooting temperature
December 19, 2013, 11:31:34 AM
This is what canon has to say about this.

http://www.canon.co.uk/Support/Consumer_Products/products/cameras/Digital_SLR/EOS_5D_Mark_III.aspx?faqtcmuri=tcm:14-731490&page=1&type=faq

Haven't found out the temperature when the overheating icon will appear, never saw that thing in the first place to be honest.

Just tested the camera in the morning.

Startup with magic lantern, no recording, no raw:
Global draw on, zebra's on, histogram on RGB.
5d3 was on a rig, so no heat from my hands/body
shot with external monitor.
Room temperature was 20 °C
All temperatures came from magic lantern. i don't have an infrared meter.

Startup:    19 °C   (a1ex, difference of 1 °C with room temperature)
after 20 seconds  24 °C
1 minute:  29 °C
2 minutes: 33 °C
4 minutes: 36 °C
8 minutes: 47 °C
And it kept there for 30 minutes, quit test after that.

let it cool down a bit and went recording continuous

Recording H264 codec:
startup    36 °C
1 minute  43 °C
2 minutes 47 °C
4 minutes 49 °C
8 minutes 49 °C
quite stable

Raw 1080X1920 (single take)
startup: 34 °C
right after i put on raw in the menu: 42°C
10 seconds 44 °C
20 seconds 47 °C
30 seconds 47 °C
40 seconds 47 °C
1 minute: 47 °C
2 minutes: 48 °C
3 minutes: 55 °C (orange)
4 minutes: 55 °C
5 minutes: 58 °C
6 minutes: 58 °C
6.30 min : 60 °C (red)
7 minutes: 62 °C
8 minutes 60 °C
9 minutes 59 °C
10 minutes: 59 °C
It kept stable from 6.30 minutes, 60/59 constant.

checked if there was a difference in heat with higlights or darks but no difference.  (this included zebra striping galore)

Raw without monitor:

startup: 33 °C
right after i put on raw in the menu: 33°C
10 seconds 40 °C
20 seconds 40 °C
30 seconds 40 °C
40 seconds 40 °C
1 minute: 43 °C
2 minutes: 45 °C
3 minutes: 48 °C
3.30 min : 54 °C   (orange, went straight up from 48 to 54)
4 minutes: 54 °C
5 minutes: 56 °C
6 minutes: 56 °C
7 minutes: 59 °C
8 minutes 62 °C  (red)
9 minutes 69 °C
10 minutes 70 °C
kept stable 70 °C after that.

After this i did another test with the monitor again, but that gave quite similar results as the earlier test.

tried putting in the monitor after various minutes shooting without, cooled down a bit (5 °C)
tried all tests again with alot of different shots (starting, stopping) but didn't really affect the heat.

it seems that the monitor "cools" it for about 8/10 °C

#10
General Help Q&A / Re: normal raw shooting temperature
December 18, 2013, 10:41:36 PM
shooting indoors at 22 till 25 celcius (that was a private pool)
outdoors at 8 celcius,   Both about the same.  Camera between 60/70 degrees celcius.

Still curious about other camera's temperature.
Just wondering because it's bright red all the time. :)

#11
General Help Q&A / normal raw shooting temperature
December 18, 2013, 02:29:46 PM
I've been getting about 70 degrees celcius (158 F) with 1920*1080 on a 5d3

how about you?
#12
Raw Video / Re: raw2dng does not convert long takes
December 15, 2013, 01:36:00 PM
OH NEVER MIND!  ;D

Found out that this is the problem!

https://vimeo.com/68473652
#13
Raw Video / raw2dng does not convert long takes
December 15, 2013, 12:57:48 PM
Hi all!

Yesterday i've been out shooting with a new production company.
The director was stressing out over the day and kept doing extremely long takes, even after telling multiple times that I didn't want to stress out the camera.

He didn't listen, and kept telling the actors that they should "keep going!!".
So i've been converting a lot now and Raw files that are rather lengthy in take (1.5 to 3 minutes) are not converted by raw2DNG.
I'm not a fan of long takes, but sometimes it needs to be done, or you have a director that doesn't listen to the dop  ;D

Anyhow, am i doing anything wrong or does raw2dng not support a certain length?

Raw2dng version: 0.13     (MAC)
ML version:  21 august     

Shot on a 5D3 
Resolution 1920/1080

Anyhow, any help on getting the shots is greatly appreciated.
And the stuff that comes out if it works, gotta love it!
http://www.adaptermedia.nl/?p=366
#14
never realized that.. will try this weekend...
#15
Quote from: legreve on July 18, 2013, 01:18:41 PM
I thought the 5D3 build was buggy with HDMi out running?

Don't have an answer to your question, but can I ask you one... are you getting continous recording even with monitor attached?

yes. no problem at all.
#16
I have something that doesn't bother me that much, but i thought you guys would want to know;

As soon as i turn on "Raw recording" in the ML menu my "zebra" overlay becomes much smaller on my HDMI out..
I'm not really clear I guess so here is the photo:

It's a 5dmk3 running with the nightly build from 2013-07-12

this is regular (internal display)     : http://www.adaptermedia.nl/?attachment_id=334
this is with HDMI (external)           : http://www.adaptermedia.nl/?attachment_id=333 

Am i doing something wrong?
Oh and thank you guys for doing an amazing job! you guys are awesome.

#17
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!



This just means that we all love you A1ex!