Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - bzhwindtalker

Pages: 1 [2]
The prores444 preset i found somewhere on the web. It doesn't play in my vlc, but my sony vegas nle opens the file fine.

The DNxHD does not output regular h264, at least not for me. I get a valid DNxHD that open up fine in sony vegas and also plays fine with vlc.
I have no froking idea of what I did but now prores is working... just as I wanted it to! the only thing tat changed is the resolution, I was previousely shoting on a T2i at 1024px, those would not play when converted to prores, now it seems to be working with 50D files at almost 1600px, I don't see how this could have caused the issue.

 Anyways thanks for the soft man, it really eases the workflow for me!

Does it get simpler than this?

Camera > .RAW > RAWanizer> Prores 444 > premiere > H264> vimeo

I did not test this for data loss over 16bit tiff but that's something I will do!

I was more looking at a simpler workflow that could be used on simple projects, ouputing to a 10-12bit video file that could directly be imported into premiere and retain much of the info for simple CC, as I don't own resolve nor know how to use it :/

So far I have only been able to oupout H264 or prores 444 files that premiere won't open?? the later seem to be a good file for what I want to do but maybe my premiere setup is not good, I have been able to read the files with quicktime fine...

The RAW video format decompiles to individual 14bit DNG files. What would be useful would be an app that could decompile the RAW2DNG and recompile to ProRes 444 or DNxHD

Try this!

General Development / Re: 50d - What's missing and what needs fixing?
« on: June 14, 2013, 03:47:10 PM »
Beep is missing too (crashes saying asif not initialized)

+1 for beep on movie start/stop for audio sync, would be great!

Yeah I agree with you, importing individual image sequences is a pain!But Rigth now I can't get anything else than H264 working for proxy video, and that's basicaly what we try to avoid shooting raw!

So leaving the video out field blank will cause the video proxy generation to fail so I will just have tiff sequences in individual folders? Nice, I will try that, thanks. BTW I changed the raw2dng to the latest one and I'm still getting pink tones from my 50D files, but raw2dng does it too :/

Hey, I did quite a lot of testing,
It seems that I can only outpout working h264, prores444 does not play either in premiere or vlc/media player, and DNxHD seem to outpout regular H264? However I noticed that checking the box "use ffmbc" makes thing work better for vidéo generation.
The H264 is nice as a proxy but it's not the best for editing... would it be possible to use RAWanizer to outpout folders containing TIFFs to be used as images sequences? I guess it's possible as it already does it for video proxy generation.

Tragic Lantern / Re: Raw video on 50d and 40d
« on: June 13, 2013, 06:45:45 PM »
Hey guys, one more report on cards and 50D recording.
I got a 1000x Komputerbay to replace the x600 one that did not write more than 24mo/sec.
Now it's all good, can shoot at full crop, 70mo/sec :) However I still have the pink picture when I zoom X5, I don't know if it is normal?

I made some tests with Rawnizer and a 50D, exporting to prores 444.
It worked nice enought but I had a lot of magenta...
Some people reported that the raw format changed in the latest builds, making it incompatible with older Raw2Dng builds.
Any input?

Tragic Lantern / Re: Raw video on 50d and 40d
« on: June 11, 2013, 09:14:09 PM »
Hey Guys I did some tests today with the 8 of June build, I am getting magenta pictures out, I am using rawnizer 5.3
Is there a setting to set somewhere to lock black point or is this issue caused by a old build of raw2dng?

Do not buy the komputerbay 600x, mine peaked at 24mb/sec no matter how I formated it! Useless for raw. I'm sending it back for a 1000x...

Tragic Lantern / Re: Raw video on 50d and 40d
« on: June 10, 2013, 07:04:29 PM »
Hey guys just a report from the field, I cant' get more than 24,5mb on my Komputarbay 600x 32gb, formated in camera.
Anything I could do to improve this? Global draw is off.

Thanks for this soft, it really eases the workflow! It took me some time to figure how to get the proxi video thing working, but I succeded in the end.
However I noticed that despite the -W option being enabled in the dcraw panel, the video output has violent expo shifts.

Also, changing the parameters in the build custom dcraw panel (like brigthness or WB) does not apply changes to the picture, and ticking or not the auto preview does not change this.

Tragic Lantern / Re: Raw video on 50d and 40d
« on: June 08, 2013, 11:40:54 AM »
Hey guys, I switched my t2I for a 50D (coming in the mail). Do the 50D have a sync beep option in raw video? Having this feature could be very usefull to sync the footage with an external recorder. I know the 50D does not have a speaker but maybe the AF confirm or timer beeps could be used for this?

If it's already done, did someone test it in a project?

Raw Video / Re: 550D raw video recording port official thread
« on: June 02, 2013, 02:25:15 PM »
Hey guys, here's my test, recorded at 1024*382 (max stable for me) Seems to be a lot of dropped (0KB) frames, it's not a bad tripod issue^^
EDIT : cant' find how to embeed vimeo, so I reuploaded to YT.
Raw2Dng > Ligthroom > Premiere
Browsing througth the footage took ages with my laptop!

Raw Video / Re: 550D raw video recording port official thread
« on: May 28, 2013, 08:22:26 PM »
Hello guys, I'm new here, I just dowloaded and installed the custom raw firmware, my card is pretty shitty I can't even get continuous 940p, but I noticed I get repetabily +20% frames when I choose 720p60 from the canon menu VS 1080p24.
Can someone confirm this behaviour?
Thanks for the nice work guys!

Pages: 1 [2]