Messages

26

Reverse Engineering / Re: CMOS/ADTG/Digic register investigation on ISO

« on: January 16, 2014, 12:47:53 PM »

It's bound to provide a little leeway, but if you're using ISOs above 100, you should (probably) only be doing so because you're already at the limits of exposure.

I guess everybody knows that if you have a pretty static scene and a tripod, iso 100 is the way to go.
At least, they should

27

Reverse Engineering / Re: CMOS/ADTG/Digic register investigation on ISO

« on: January 16, 2014, 12:23:26 PM »

Half a stop at 12800? That's goooooood.

28

General Chat / Re: "Psst... prepare for a little "sensor upgrade" :)"

« on: January 15, 2014, 12:12:25 PM »

 

29

Reverse Engineering / Re: Toshiba TX19A discussions on nikonhacker.com

« on: January 14, 2014, 01:19:22 PM »

Anybody gave a look at their forum?

30

Reverse Engineering / Re: CMOS/ADTG/Digic register investigation on ISO

« on: January 14, 2014, 11:12:20 AM »

Damn, i haven't had a compiling environment since i bought this new laptop.
I'll try to get it running tomorrow and meanwhile i can try to understand what is exactly involved.
I need to learn all this stuff, so far what seems to be the trick?

31

Reverse Engineering / Re: CMOS/ADTG/Digic register investigation on ISO

« on: January 14, 2014, 10:29:01 AM »

I got my 6D and digic poke, if you need some data i can try and provide you some figures.
Just let me know the procedure.

32

General Help Q&A / Re: What is the maximum sensor temperature for the Canon 5D Mark3 etc.

« on: January 11, 2014, 06:15:16 AM »

Of course Canon will shut it off for you if it's too hot.

33

Tragic Lantern / Re: Records of "bricked" 6Ds?

« on: January 10, 2014, 01:37:46 PM »

Don't test it on the field straight away.
Give yourself some time to know what you are doing first.

34

Modules Development / Re: DotTune AFMA (dot_tune.mo)

« on: January 10, 2014, 01:04:43 PM »

I would like to use the dottune ML module on a 550D... I realise 550D doesn't have AFMA adjustment, I just want the AFMA value at a series of focal lengths and distances to pump into my Sigma 18-35mm lens using the Sigma USB lens dock. Anyone know if it's possible to get dottune to run on 550D?

It does nothing on cameras that don't have AF adjustments.

35

Tragic Lantern / Re: Records of "bricked" 6Ds?

« on: January 09, 2014, 03:36:12 AM »

Mine has been sitting quite alone lately, i've taken just a bunch of test pics and no real photos.
Does that count as bricking?

36

General Chat / Camera dividers for my backpack/trolley

« on: January 08, 2014, 04:30:41 AM »

Hi all, i got a very good backpack that acts as a trolley bag as well and i would like to put my photo equipment in there without having to buy another backpack.
Do you know if there is a way to insert some kind of dividers into the main compartment so that my equipment is protected and sorted out?
Alternatively, is there a good way of doing something like this myself?

37

Modules Development / Re: Magic Lantern (RAW) Video format v2.0 (mlv_rec.mo)

« on: January 08, 2014, 02:40:32 AM »

A bunch... like 3-5 MB/s and won't let you record certain sizes. Wonder if it had an effect on pink frames because I saw way less.

Even with full audio controls beep turns off the input... sucks I don't think the IC can record and play at the same time. I blocked beeps while recording.

So with today's commits (pre-buffering):

1728x1152 is continuous with audio if using fill method 3. 4 won't do it for some reason.

This is for 7D right?

38

Hardware and Accessories / Re: I need help to choose which audio tools

« on: January 08, 2014, 02:28:49 AM »

You can adjust the volume for input and output from the H1 so you're in control.
It is a pretty basic tool but in terms of performance it is quite a good deal.
Just make sure you handle it with care.

39

Hardware and Accessories / Re: I need help to choose which audio tools

« on: January 08, 2014, 01:51:40 AM »

Yes, the H1 has got line out so you can listen to what you are recording, if that does not feed the camera.
The problem with the H1 is its crappy build quality.
It's all plastic and the casing itself and the battery door make a lot of noise so not the best for an audio device.
Also, it's quite fragile and does not give you any feeling of sturdiness.
The H2n would be a good option too.

40

Tragic Lantern / Re: 6D - Install guide and raw shooting.

« on: January 08, 2014, 12:37:47 AM »

I also followed the same but not working for me. Anything I am missing?

Well, i guess you are missing some steps.
That guide is the one everybody followed so it definitely works.

41

Modules Development / Re: Magic Lantern (RAW) Video format v2.0 (mlv_rec.mo)

« on: January 07, 2014, 08:39:16 AM »

Yep the sound is working..

0x40001000 was what g3gg0 changed it to, I changed it back because of above problems, wondering
what the flags are about. maybe there is a better setting because there was a definite effect on speed

How much?

42

Modules Development / Re: Magic Lantern (RAW) Video format v2.0 (mlv_rec.mo)

« on: January 07, 2014, 03:14:54 AM »

Is the latest TL build working with sound?
Improved in that aspect ratio you mean?

43

Main Builds / Re: Nightly Builds - try the very latest stuff here

« on: January 06, 2014, 10:26:14 PM »

Thanks to the contributors

44

Duplicate Questions / Re: Double Exposure?

« on: January 01, 2014, 11:02:03 AM »

So, again, why can't you do it in photoshop?

45

Duplicate Questions / Re: Double Exposure?

« on: January 01, 2014, 07:11:48 AM »

And HOW would you do it?

46

Feature Requests / Re: 2048x1080 h.264

« on: December 30, 2013, 01:52:05 PM »

I thought the same when i realized i couldn't fly.

47

Feature Requests / Re: 2048x1080 h.264

« on: December 30, 2013, 01:13:12 PM »

Look harder.
Short answer:NO.

48

General Development / Re: Wanted: temperatures from your cams

« on: December 28, 2013, 03:03:55 AM »

I am curious, what do you need to know the actual temperature for?

49

General Help Q&A / Re: Why this white line in every frame? Help, please!

« on: December 28, 2013, 02:39:32 AM »

Scratches or dust do not show up. That is just a bright pixel.

50

Archived porting threads / Re: Magic Lantern for 6D | Dev kit released

« on: December 25, 2013, 01:12:49 AM »

Good job, thank you so much