Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - xanta

Pages: 1 [2]
26
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 29, 2013, 05:03:38 AM »
https://www.dropbox.com/s/my5dhhadihgdd4x/Comp%20%280-00-07-29%29.jpg

27
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 29, 2013, 04:56:02 AM »
i transferred the raw to dng sequence and imported to after effects
but in each frame there is a strange area of redish grain, and its in the certain position of the picture and doesn't move with the stuff inside the picture

how do i upload my picture?

28
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 29, 2013, 03:51:56 AM »
reporting again~~~~

i tried the RAW feature under 1280*720, skipped one frame every 300 frames,and the speed is around 35MB/s, sandisk U-1,45MB/s,im not sure weather the card speed is enough, a U-1 should be 45MB/s shouldn't it?

29
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 28, 2013, 11:35:54 AM »
the Histogram shows up above video mode or LiveView

just like what i said about the EV bar before

30
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 28, 2013, 05:50:26 AM »
Quote from: red5446 on May 28, 2013, 04:34:37 AM
i just confirmed this.
it works ok wiressly!
nice :D

Congrats~

31
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 28, 2013, 04:06:33 AM »
Quote from: red5446 on May 27, 2013, 08:57:26 PM
i have this one :http://www.amazon.com/gp/product/B0050E7OSM/ref=oh_details_o00_s00_i02?ie=UTF8&psc=1

i want to try that but i can´t find the option in this prealpha.
what camera did you use? i have a 650d

same 650D. :)
i found the [REC key] under the MOVIE section, and set it to [halfshutter],and it worked, with a wired shutter trigger or just the shutter on the camera.

BUT i noticed that the instructions below says [Start recording by press shutter halfway. Wired remote]

@nanomad    does that mean a wired remote works with this feature but a wireless one doesn't?

i guess there must be some difference of the operating principles between the wired and wireless remote/shutter trigger



32
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 27, 2013, 03:31:06 PM »
Quote from: red5446 on May 27, 2013, 02:37:39 AM
can i activate Movie REC key in this prealpha?
i was trying to find it but it seems it lacks this feature. want to try if it´s possible to trigger video with a 603 younguo.

i tried to google it and figured out it is a wireless trigger,im not sure whether a wireless trigger works but if that still needs to be pluged in the jack on the side of the camera, it would work cuz i tried my wire trigger?cable trigger?(dunno what to call it for my poor vocabulary.....) just now.it worked and started recording video when i half push the shutter,

33
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 27, 2013, 03:04:45 PM »
Quote from: red5446 on May 27, 2013, 02:37:39 AM
can i activate Movie REC key in this prealpha?
i was trying to find it but it seems it lacks this feature. want to try if it´s possible to trigger video with a 603 younguo.

im not sure what a 603 younguo is but when i tried out this afternoon, it seemed the  REC key halfshutter  worked just fine
is that what you need?

34
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 27, 2013, 03:00:07 PM »
what should i do if i want to do things as nanomad?what do i need to be skilled in?C or any other programming language?

i major Electronic and Information Engineering and i learned something of C progranmming, is that enough?


35
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 26, 2013, 05:46:49 PM »
 ;D ;D
YOU GUYS ARE THE BEST！

36
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 26, 2013, 05:17:50 PM »
one little thing which im not sure whether it matters or not

at Video mode ,pushing the Trashcan button do get me to the ML menu but the EV bar(?dunno what to call it...)remains at the bottom of the display, i mean just the area which shows the EV overlay on the ML menu

not good at expressing myself clear in English, hope you guys can undestand me......

not a big deal is it?

37
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 26, 2013, 05:06:58 PM »
I waited for almost 6hrs while downloading the 650D-safe-dumper.fir and now it's ready !
did it as the #1471? said
no extra heat no crush yet~~
thx for the help from the above Replies to the topic
i am quite a newbie here and haven't figured out how to use ML but im trying to learn!
ahahaha!

38
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 26, 2013, 11:37:46 AM »
Quote from: xanta on May 26, 2013, 11:31:40 AM
Could anyone send me the 650D-safe-dumper.fir?
Cuz i do not know why my downloading process always stuck at 22% (47.5KB/211KB) and i've tried several networks
sorry i didn't post my email address. By attachment PLZ!

wangshenhao@hotmail.com

i'm a sophomore from China and i'm interested in the Magic Lantern working on 650D cuz i dont have spare money to buy aother upper class camera~~~~LOL
THX

39
Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: May 26, 2013, 11:31:40 AM »
Could anyone send me the 650D-safe-dumper.fir?
Cuz i do not know why my downloading process always stuck at 22% (47.5KB/211KB) and i've tried several networks

Pages: 1 [2]