Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Vegandelight

#1
Quote from: mageye on April 13, 2017, 05:44:39 PM
Yes.

On Samyang 35mm (manual)

I get: 'Ensure a lens is attached. Press START STOP button to activate movie shooting.'

I think it's just a lens communication thing

Thats a normal error, but when you press START STOP the screen goes black and you can hear the mirror locking up like it should. But no image.
#2
I havent tried the latest build but i tried running a manual lens on the camera today, the screen doesnt turn on when in video mode. Works in photo mode.

HAs anyone experienced that?
#3
Quote from: hjfilmspeed on April 12, 2017, 05:55:28 PM
In camera? Or post processing?
For post I used the RAWFlow app and just replaced the MLV_DUMP with the newest version and it processed the 14Bit Lossless just as expected. Drag n Drop.
RAWFlow - http://www.magiclantern.fm/forum/index.php?topic=13338.0
MLV_DUMP Update - https://builds.magiclantern.fm/experiments.html

Nice, Premiere or DaVinci Resolve? The old DNG-files opeened right up in Premiere but these compressed ones does not.
#4
What kind of work flow are you guys using for the 1920x960 3x3 binning 14bit raw mode?
#5
Thanks for the response. Finally got a set of DNG's, wish they worked directly in Premiere.

Keep up the good work.
#6

1920x960 50fps 3x3 pixel binning gives me static on all footage. Am i doing something wrong here?
#7
This might be a stupid question but should MLVFS work with the compressed 14bit files? im just getting pinkish static when trying to view them.

Tried the script on my camera and everything seems fine, i missed the April 4th update, tried all of the other builds ;)
#8
General Chat / Re: Gopro scripts
August 04, 2013, 10:16:50 AM
This is really a big deal considering GoPro revealed it can do 4K 24fps and 720p240. But that generates too much heat for the current design of the camera, but a heatsink or similar could easily fuck that issue.

Has any additional information about changing video modes been found?
I would love to see this topic being discussed even tho it's for magic lantern.

GoPro Hero 3 Black Magic Lantern Edition. Come an!
#9
Quote from: DjJuvan on May 20, 2013, 08:36:52 PM
Maybe a stupid question, which could be answered already somewhere but I didn't notice.... Why can't I record more than 1920x1288? Even if I can't on 24fps, I could lower framerate and make timelapses at bigger resolution?

Thank you ^^

Use either 5x or 10x zoom mode, then you can choose higher resolutions. But that mode crops the sensor output.
#10
I got pulled the last build. Doesnt compile anymore. Crap.


Edit: Redid it all, now its working again. May19th.

The Hack3D mode gave me the ability to shoot 1920x1280. But the cards seems to be so inconsistent, or do you change buffer size every time the shooting start? A1ex?

It goes from like not being able to shoot 1920x1080 for more than 1 second, to shooting 4gb worth of 1920x1280.
#11
I wonder if the person submitting 64gb komputerbay had it in lv-mode or just playback.

cause LV Photo maxes out at around 98mb/s
playback mode 121mb/s

A1ex what mode are we suppose to try in? so people are clear on that.
#13
There is some kind of inconsistency with these cards. Alot of people buy these cards but keeps getting different results.

Post your size,highest resolutions and benchmarks test.

I got a 32GB card.

I got do 1920x1152 24fps without a sweat.

#14
Quote from: Steven on May 18, 2013, 08:15:55 PM
Is 25p recording actually enabled?

It would be interesting to be able to start raw recording to the cf card and h.264 proxy recording to the SD card simultaneously with the dedicated canon start video recording button.

Just set FPS Override to 25 fps afaik.
#15
Finally got it running. Why doesnt make install copy raw_rev.o? maybe thats not even needed?
#16
Quote from: a1ex on May 17, 2013, 11:07:23 PM
I would rename it to 550D.sym, 6D.sym and so on. It will help when we'll use the same zip for more cameras.

Can it be named whatever we want in the modules dir, does it matter?
#17
Did i miss like the normal compilation guide for ML?

Am I suppose to get that MAGIC.SYM when compiling raw_rec module? I see it in the versions I download, but I haven't seen any when I'm doing it.
#18
Quote from: KMA_WWC on May 16, 2013, 04:20:23 AM
I feel like you were siting next to me and seeing what I saw :) I have/had same issues like you did. I got my Komputerbay card and the speed vary between 60-72mb/s. I haven't tried the new build yet, but that's what I'm going to do. Hopefully its as good as other people say or at least better.


My personal observation about this whole thing:

I think right now not just everyday, but almost every hour or so there are new improvements in the firmware. I like the fact that most of the bugs can be fixed or worked around. I personally think installation and whole post workflow isn't as hard as some people describe it. It only took me 10min to downgrade from 1.2.1 to 1.1.3 and then install everything needed. Yes, post workflow is time consuming, but overall i think within a certain time that would be worked out too. I really like where everything goes and hope to contribute and help.

Also, I just tested the SanDisk extreme pro 32gb CF card and I was actually able to shoot at 1080p (1920-1080 exact) with that card until it reached 4gb. I had only 9 skipped frames (to be honest not 100% if it skipped any frames at all). Test shows the write speed around 74-88mb/s. Its much faster than my brand new komputerbay 128gb 1000x even though on paper komputerbay supposed to be better. All those test were done with an old build and I'm pretty sure after I install new build it would be much better.

QUESTION: Where do I send/attach the list of bugs I encountered also log infos?

I think it might be the bigger Komputerbay cards that has problems with speed. I got the 32gb and havent had any dropped frames on 1920x1080. And im running the May13 build.  I havent been able to do bigger than 4gb files tho.
#19
Quote from: Nspa32 on May 15, 2013, 11:51:51 PM
Can someone please let me know if we can get this working on the 600D would it also work on the 550D? I mean, why wouldn't it? Aren't the internals identical?

It's been said it probably wont work. Read a few pages back.
#20
I find it really hard to know what im actually shooting at 5x and 10x. The frame isnt correct i guess cause im not getting what i think i am ;)
#21
Quote from: tonybeccar on May 15, 2013, 09:47:53 PM
Has anyone tried with the Toshiba 1066x Excercia Pro compact flash cards?? They're supposed to be 30 MB/s faster! They say they're prepared to record 4k video...

I don't think you'll be able to break 100mb/s with that card either, it's hardware related limit at the moment
#22
Quote from: Director on May 14, 2013, 09:37:58 PM
Mr. Alex

Can you make tutorial video.

How install RAW update in camera

because, I did't see link for download update

also I don't understand for commen txt.

Thanks

http://www.magiclantern.fm/forum/index.php?topic=5405.0
#23

Edit: N/M

Spoke to soon as always :)

SD: Sandisk Extreme 95Mb/s 16gb.
CF: Komputerbay 1000x 32gb

Now i need to figure out how to record  :o
#24
I get a few warnings when compiling last nights nightly. Is that common, i havent compiled ML before.
If i get a bin at around 433k, it should be OK right?
#25
Modules Development / Re: 14bit RAW DNG silent pics!
April 29, 2013, 08:44:05 PM
Quote from: Rush on April 29, 2013, 08:38:01 PM
CF (5D2, 5D3, 7D) - up to 150 mb/s
SD UHS-I (6D, 650D, 700D) - up to 90 mb/s
SD Class 10 (550D, 600D, 60D) - up to 22 mb/s

Required badwitch 2.4 mb * 25 = 60 mb/s, so it seems that new cameras will handle this speeds... but 1% mention fragmenting which affects speed, so I'm unsure about UHS-I

The 5d3 SD slot maxes out on 133x afaik. Don't forget that people. That's why i bought the CF instead.