Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - aedipuss

#51
speaking of on topic. has anyone heard from nikfreak lately?  or the other dev that was going to fork the project?
#52
arrg 2.3 vs. nightly...   is there even a 2.3 anymore?  anyway the 60d/7d seem to have been the end of the audio features, not even the mighty 5d3 has them.  i really like that they are usable in my 60d and use it's headphone monitoring with an external rode mic all the time when shooting video.
#53
sethBB - from the user ML manual "Magic Lantern has no audio controls for Canon 600D/T3i and newer cameras. You can disable AGC from Canon menus though."
#54
save them as a sort of preset?  all settings on my 70d stay the same after power off and on including global draw, and clear overlays. if they were set off they start off on power on.   not sure what arrows is?
#55
take the card and battery out.  reformat the card in a reader attached to your computer to clean everything off.   replace battery and start without a card.  camera should come on say no card then start after a minute.  turn it off insert card and turn on. go to canon menu and reformat card with a check in low level.  if camera turns on ok without a card but still doesn't work with that card, it's time to buy a new card as that one's bad.
#56
pbenco - did you install the ml firmware?  you need to put the camera in manual mode and select update firmware in the camera menu with the ml files on the card.  follow the instructions.
#57
have you tried different batteries?  i've had some weird problems crop up with dying aftermarket batts.
#58
@Danne - the output dng files from mlv_dump don't work in windows versions adobe or vegas either.  changing "model" with exiftool to 6D doesn't help.

@nitfreak - LOL yes they say patience is a virtue, but it doesn't help get things tested.  :-)
#59
i used exiftool to change the output of raw2cdng.1.7.4 dngs "model" to Canon EOS 60D and the dng files still can't be opened by adobe or vegas.  is there something else other than model that needs to be changed by the exiftool?

#60
thx!
#61
is there a way to batch all of a folder's dng at once with exiftool?
#62
i've got lightroom also.  yes it imports 70d dng but if you export dng they still don't work in photoshop or vegas, even if you use the cdr2dng plugin.
#63
Danne - raw2cdng.1.7.4 doesn't work for 70d mlv files.  it produces dng images that can't be imported into adobe or vegas.  i haven't found any current utility for windows that does.  the closest i've come for windows is the latest jenkins build of cr2hdr-20bit will convert 70d dual iso cr2 to usable dng.

#64
for windows people looking for a dual-iso cr2 to dng workflow that produces 70d dngs that photoshop can use, try this.

barracudaGUI - http://www.magiclantern.fm/forum/index.php?topic=9102.0

and the latest jenkins build of cr2hdr-20bit - https://builds.magiclantern.fm/jenkins/view/Other%20tasks/job/cr2hdr-20bit/

follow the barracudaGUI install instructions and your resulting DNGs will be usable.


now if i can just work out a way to set the dual iso manual exposures properly to get good HDR pics  :-)  so far i mostly overexpose everything....
#65
@pontius - i'd try again.  format the card in the camera choosing the delete ML option.  then copy the ML files on the card and update the firmware and reboot.  you shouldn't need to turn any modules on but you do need to turn on exposure override or turn off auto exposure for it to work.
#66
@deafeyejedi is there a version of cr2hdr-r for windows?  all i located is the osx version.  i have the cr2hdr lightroom plugin but it does nothing for HDR video.
#67
anyone have a windows workflow to get HDR video processed?  i take the 1280x432 mlv and open it with mlrawviewer_143 and export mov.  which should then go into  hdr_workflow_051, but it won't open the mov mlrawviewer has created. 

vegas will open the mltawviewer mov and reports it as prores444 and i have that codec installed.

hdr workflow does open a HDR video if it's recorded by the 70d camera in mov.
#68
@nikfreak -  thank you!!! exp override was off.  and thank you for getting ML going on this cam, i bought it just a couple weeks ago when i saw you were working on it.
#69
@dmilligan - thank you!!!  it was set to auto.  HDR video menu setting now turns bright green and is working in h264 mov.  the windows tool only works with mov.


#70
here's what the ml screen shows - anything pop out that needs to change to record HDR?
#71
the tool (hdr-workflow-051) to merge HDR video in windows expects an h264 mov file and can't open MLV or RAW. 

i tried shooting 1280/60 raw and mlv HDR and get the same results as shooting h264, the HDR menu option turns green but it's shaded and it list the options as 0/0,4ev  and the resulting video has no flicker in mlrawviewer.

how do i get raw/mlv to shoot 1280/720?  i set it to 1280 16/9 and get 1280/432.
#72
HDR video records in h264 fine in other ML cameras like the 60D i own.  still not working in 70D at all.  reloaded the beta-1 from page 1 and still not working in 1080p30 and 720p60.
#73
LOL that would be it.  thought it was implemented for normal video like for other ml versions.  oh well...  the change log only said -bring back hdr video- didn't know it was only for raw video.
#74
@nikfreak - tried hdr video.  all frames the same.  for some reason the hdr ml settings say iso 0/0,4ev instead of iso 100/1600,4.0ev like on my 60d.  tried at both 1920x1080 all-i and 1280x720 all-i.

the hdr option in the menu turns green when it is selected but it's a dull green not like other items that are on.
#75
@ ley - sorry but if you look on the ml audio menu the only thing implemented at this time is mlv sound for recording audio with raw mlv video.