Messages

Hi arrinkiiii...sure I saw this. 1% said it was somewhat working so I tried the Jan 2 build. No wav file captured. Really appreciate the effort to try and get sound !!!

Please tell me if there is anything that shouldn't be on this card.

ok....loaded tragiclantern-v2.3.NEXT.2014Jan02.7D203....still no seperate wav file. Same thing as above with the mlv2dng. The histogram does not work in lv and the lv screen becomes messy with readouts on top of each other when recording. Is there something really wrong with what I'm doing with the setup?

Also with dec 31st TL....this appears in mlv2dng

Loaded the dec 31 TL 7d203...tried the mlv sound on seperate wave....i get no seperate wave file. also with gd on and histogram selected the histogram does not show in lv.

You have a nightly builds system here: http://builds.magiclantern.fm/

But if you want to keep staying away from the main ML development, you are on your own.

Hey a1ex...I don't see the 7D in your platforms.

I think from the menu you can do a screen shot 10s but it does a speed drop when you do. There is a buffer graph in MLV rec too.

Thanks 1%  !!

[Crazy question here]

Crazy question here. Is there any way that while I'm recording in raw I could take a screen shot of the Liveview info ??

Global draw on Crop is not a good idea then? You shooting at 2048x872? How fast is your CF card?

Just gathering some info for a friend with a 7D and an itch to shoot his next project in raw.

I just retested in 5x crop. I can do, as you say 2048 x 872 at 2:35:1 in 5x with global draw ON. The card reads 73.6 mb/s on continuous. The benchmark pic for the card you will see on this page (84) under jman.
The card is a sandisk extreme pro 160 mb/s 1067x. Cheers.

Actually, and I'm sorry if I'm alone here, I like the system where RAW is viewed when the camera is used for RAW and standard images (photos and H264 video) when it's not. What I've been doing is use one card (Lexar x1000) for raw video and an older card (Sandisk Extreme 60MB/s) for other stuff. I understand this might financially be a problem for some people but for me it means focus on what I'm doing. All it requires is a boot and card swap, easier even than going into the menus from an idiot proofing point of view.

And jman, nice benchmarks. I've not concentrated on benchmarking my camera, did it once ages ago and didn't pay much attention. I suspect any trace of the benchmarks are long gone, it was several versions ago and I've reformatted my card and reinstalled several times since then. Does it help, or is it for information only? I haven't been unhappy with performance at all. I switch global draw off, use a 128MB startup file, and only use frame override when I'm playing with crop mode. I was using MLV for a while but I like Rawanizer for getting the files to my HDD so I've switched back to old fashioned RAW as Rawanizer doesn't recognise MLV. I also have more options for the odd occasion my files are a bit finicky, I have a couple of MLVs that aren't read by mlv2dng and it's the only option on PC that I know about.

Hey jayzed....I'm very happy with the Sept 12 build. No problems at all. I can shoot all 1x raw with global draw ON continuous at full res. With crop I can go 2048 at 2:35 continuous. So not bad. I'm not quite sure what these recent builds offer, but I'm from the if it's not broken don't fix it school. Cheers.

Benchmark with SanDisk Extreme Pro 160 mb/s 1067 cf card.

@ hdclip

Thank you very much for the raw2cdng link. I tried coloring my raw footage using speedgrade with the 5diii look preset, works perfectly fine.

Has the sound recording issue in RAW been fixed?

I have had no problems using an H4N and syncing to the camera beep in post. ML beep is fine to sync to.

I have using this build WITHOUT any problems at all. Not really going to try nightly until something major comes along.

01/09/2013
► britom's build with 1% version of raw_rec and mlv_rec with great features. (Thanks 1%!)
Don't forget to enable ime_base and ime_rot modules so you can write text in the "Tag: Text" Field
https://www.dropbox.com/s/b88gx62p1uyy46f/ML_britom_1%25_01_Sep_2013_.zip

Sorry I meant WITHOUT global draw on.

I'm using the 29/09/2013 build. When I record I do so with global draw off. The crop box remains on for a few seconds and then disappears for about 20 seconds. Is there any way to have this crop box on all the time with global draw?? Cheers for your help !

I'm using the 29/09/2013 build. When I record I do so with global draw off. The crop box remains on for a few seconds and then disappears for about 20 seconds. Is there any way to have this crop box on all the time with global draw?? Cheers for your help !

Only converter that has worked for me thus far in Resolve 9 is rawmagic.

I'm using resolve 10 now, though I haven't tested to see if any of the other converters work with it since the update.

As far as I can tell, all the bizarre fringing phenomena have seemingly disappeared, though the vertical line pattern is still apparent.

Grab rawmagic and convert the files again, see if that works. Im on a mac BTW, not sure if raw magic is PC compatible.

Just sorta figured it out. Resolve 9 does not allow avi's as imports and dng's do not convert in the change format option in Resolve. So I brought the dng into AE and saved it as an uncompressed TIFF SEQ.
Using a PC. Works fine. Now able to play with the clip in resolve....Cheers.

Just a question for any of you Resolve 9 users out there. I used MLV2dng to convert my video. When I brought the dng file into Resolve it was all purple and really distorted not readable at all. What's with that ? 

U need to update with the last versions from 1%. After this turn on you camera and update the firmware for you get the the fps override option to work.

In the ML menu, movie, just put the disere fps and use the exact fps option also. Using 5x you can get 2k, igher resolutions and without skipping frame, no moire or other undesired things =))

For now it's the only method that we have to have some functions work on the 7D, like fps override.

Thank you...will give it a go. Cheers !

Not sure if I'm reading this right. When you record raw (mlv) at 5x (zoom) the frame rate is 30fps.
In order to change it to 23.976 do you have to go into the Canon menu and change the firmware ?
I'm using the Sept 30th update which is autoboot. I just copied the files from the newest update that provides the fps change.
What is the reason (benefits) to record at 5x and what is the proper way to get fps to work. Cheers !!!!

In: Raw Video menu>Sound>sync beep

Thank You !

for now you have to use an external recorder and sync using the beep.

Hey Ted.....is there a beep function in the ML menu ?? Cheers.

You only need autoexec bin, fir and the modules.

THANKS again !!!

Is this the latest build with everything on it ??  https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5B7D%5DPopStop.zip
Can this be dragged onto the card to replace files or do I need to clear the card and start new?

Shortcuts (ie ISO/Volumes)
Display Filters
Force LV works
Audio Controls *(just missing screen on)
reslock/edmac 05 (so no pink frames, I've yet to see any)
Dialog Timers hack (77-81MB/s) also the "dead" 10x seems to help without fps override

That's all off the top of my head...

'
Thank you.