1
Duplicate Questions / Re: 7D - Help files not found
« on: February 14, 2022, 05:26:43 AM »
@Walter - Perhaps it's time to lock the thread.
News:
Etiquette, expectations, entitlement...
@autoexec_bin | #magiclantern | Discord | Reddit | Server issues
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Raw Video Postprocessing / Re: MLV App 1.11 - All in one MLV Video Post Processing App [Windows, Mac and Linux]
« on: April 15, 2020, 06:48:04 AM »
@Luthor @Tupp
Let's remember that all the development work and distribution packaging is being done by people who aren't getting paid for it and doing it in their spare time. So how about we stop the pissing contest.
@Luthor If you feel that strongly that MLVAPP should be distributed via a packaging tool then: perhaps put your hand up and volunteer to take ownership of packaging and distributing the app for the developers unpaid in your spare time.
If not, then I think your suggestions have been heard load and clear. However at the end of the day it is up to the developers to decide on their distribution process.
Let's remember that all the development work and distribution packaging is being done by people who aren't getting paid for it and doing it in their spare time. So how about we stop the pissing contest.
@Luthor If you feel that strongly that MLVAPP should be distributed via a packaging tool then: perhaps put your hand up and volunteer to take ownership of packaging and distributing the app for the developers unpaid in your spare time.
If not, then I think your suggestions have been heard load and clear. However at the end of the day it is up to the developers to decide on their distribution process.
3
Raw Video Postprocessing / Re: MLV App 1.10 - All in one MLV Video Post Processing App [Windows, Mac and Linux]
« on: December 27, 2019, 01:17:51 AM »
I've been using a DLINK NAS for many years now. Capacity is 4 TBs in raid 5 configuration. it's always on and set up to spin down the drives when not in use and to perform a health check of each drive monthly. The individual drives are hot swappable in the event of failure and will automatically rebuild the data on the replacement HD. And, because you can never have too many backups, all my important data/images etc are backed up to external USB HDDs.
Effectively back-up solutions are so cheap nowadays that there really isn't any excuse to lose your data anymore.
Effectively back-up solutions are so cheap nowadays that there really isn't any excuse to lose your data anymore.
4
User Introduction / Re: This noob says hi and has a noob-question...
« on: September 06, 2019, 07:28:26 AM »
Welcome aboard.
To answer your question. Yes (assuming that one can downgrade 1100D firmware).
Note that ML will not load if the camera has an unsupported firmware version.
To answer your question. Yes (assuming that one can downgrade 1100D firmware).
Note that ML will not load if the camera has an unsupported firmware version.
5
Raw Video Postprocessing / Re: MLV App 1.8 - All in one MLV Video Post Processing App [Windows, Mac and Linux]
« on: July 30, 2019, 10:11:39 AM »Quote
2) Is there any way to get rid of black window during render procedure? And maybe minimize main program window? They interfere with other programs.
Assuming that you are on the current Windows 10, Try running it in its own desktop. All associated processes should be self contained within that desktop instance and not interfere your main desktop processes.
Window key / Tab Key to create an additional desktop.
Switch to and run the app in the new desktop. I would expect that when running a time consuming processes like a batch export or importing a lot of files: that those process will run fine in the background if you switch back to your main desktop to do other activities.
6
Raw Video Postprocessing / Re: MLV App 1.8 - All in one MLV Video Post Processing App [Windows, Mac and Linux]
« on: July 29, 2019, 03:56:06 AM »
@Ilia3101
Yes, it works fine.
Quote
Could you put MLV App on a different virtual desktop in windows?
Yes, it works fine.
7
crop_rec and derived builds / Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« on: June 25, 2019, 12:32:57 PM »
@Igor_Braun - Getting video unavailable error message.
8
General Development / Re: Portable ROM dumper
« on: January 14, 2019, 10:23:06 AM »
@Alex / @Dfort,
Can I please have a reminder on the testing process and I will test it on my 7D-1. and will advise the results.
Can I please have a reminder on the testing process and I will test it on my 7D-1. and will advise the results.
9
crop_rec and derived builds / Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« on: September 02, 2018, 09:10:34 AM »Quote
If anyone missed it 5D2 10 bit 3K raw video is a reality !
Another Pipe Dream comes true
So cool Reddeercity, persistence and perseverance really paid off.
10
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: June 26, 2018, 01:08:51 PM »
@Bouncyball @kanakori
I have a 7D mk1 and can't do dual_ISO video but I have experienced the same effect with stills when I had Dual_ISO and ETTR enabled and,
"Link to Dual_ISO" was enabled in ETTR
Occasional ETTR would override my alternate ISO and make both ISOs the same. None of the processing programs available would see the images as Dual_ISO and I would be able to see the horizontal lines in the image.
Hope this sheds some light onto what may be happening.
Quote
It's because of the clip is not detected as dualiso
I have a 7D mk1 and can't do dual_ISO video but I have experienced the same effect with stills when I had Dual_ISO and ETTR enabled and,
"Link to Dual_ISO" was enabled in ETTR
Occasional ETTR would override my alternate ISO and make both ISOs the same. None of the processing programs available would see the images as Dual_ISO and I would be able to see the horizontal lines in the image.
Hope this sheds some light onto what may be happening.
11
crop_rec and derived builds / Re: crop_rec on steroids: 3K, 4K, 1080p48, full-resolution LiveView
« on: February 26, 2018, 08:43:31 AM »
MLV_Rec records sounds, MVL_Lite does not.
12
Raw Video / Re: [Survey] EOS Utility: Liveview capture in video mode with MLV/RAW enabled?
« on: October 15, 2017, 05:29:42 AM »
Test results for - 7D
Test:
- Load any MLV or REC record module. Don't activate MLV/RAW in movie tab.
- Run EOS Utility and connect cam to PC via USB.
- Activate Liveview option in EOS Utility.
-> EOS Utility will show Liveview as expected. Yes to Liveview - photo mode and movie mode
- Disconnect USB and activate MLV/REC option in movie tab.
- Run EOS Utility
- Connect cam to PC via USB and try to establish Liveview.
-> Liveview button will not work as expected. -> Fail to Liveview - movie mode
-> Liveview is working -> Pass to Liveview - photo mode
Test:
- Load any MLV or REC record module. Don't activate MLV/RAW in movie tab.
- Run EOS Utility and connect cam to PC via USB.
- Activate Liveview option in EOS Utility.
-> EOS Utility will show Liveview as expected. Yes to Liveview - photo mode and movie mode
- Disconnect USB and activate MLV/REC option in movie tab.
- Run EOS Utility
- Connect cam to PC via USB and try to establish Liveview.
-> Liveview button will not work as expected. -> Fail to Liveview - movie mode
-> Liveview is working -> Pass to Liveview - photo mode
13
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: September 15, 2017, 02:59:44 PM »Quote
You mean a Windows version?
Yes, NP i'm patient.
14
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: September 15, 2017, 12:49:33 AM »
Just had a look at v0.7 cross platform. The download zip file is for MAC only. IS an x86 build on its way?
15
Raw Video Postprocessing / Re: MLVFS - a FUSE based, "on the fly" MLV to CDNG converter
« on: August 29, 2017, 10:22:03 AM »
Just unzip the application to a location of your choice and run the app directly.
Everything that it needs is self contained within its folder.
Everything that it needs is self contained within its folder.
16
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: August 22, 2017, 04:10:38 AM »
I tested an MLV clip with sound last night. w10 64bit version.
Video exported fine, however there is no sound and/or no separate audio file created.
When reviewing the app preferences Export Audio is ticked but greyed out.
Video exported fine, however there is no sound and/or no separate audio file created.
When reviewing the app preferences Export Audio is ticked but greyed out.
17
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: August 21, 2017, 03:42:22 PM »
@bouncyball
This is the first time that I have ever downloaded and tried the app so I wasn't doing any serious testing. I really just wanted to confirm that the versions that you provided the links for were working.
The actual file only had a few hundred frames captured when testing the 10/12bit raw recording on my 7D as I didn't have access to anything larger on the night.
Playing around with it tonight and it seems to be handling spanned files >4gb without any problems.
This is the first time that I have ever downloaded and tried the app so I wasn't doing any serious testing. I really just wanted to confirm that the versions that you provided the links for were working.
The actual file only had a few hundred frames captured when testing the 10/12bit raw recording on my 7D as I didn't have access to anything larger on the night.
Playing around with it tonight and it seems to be handling spanned files >4gb without any problems.
18
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: August 20, 2017, 03:45:08 AM »
@bounceyball
Both versions working fine with a small sample file. I don't have anything larger than 4gb anyway so I wouldn't have picked up reddeercity's error.
One option that would be really useful would be a button to reset the sliders back to their default settings.
A couple of questions if I may:
Cheers
Both versions working fine with a small sample file. I don't have anything larger than 4gb anyway so I wouldn't have picked up reddeercity's error.
One option that would be really useful would be a button to reset the sliders back to their default settings.
A couple of questions if I may:
- Edit settings are not captured at the clip level - is this intentional?
- We can choose which codec to export in and whether to include sound or not. What is the default export frame rate and can this be turned into a user definable parameter?
Cheers
19
Raw Video Postprocessing / Re: Making a New MLV Processing App! [Windows, Mac and Linux]
« on: August 18, 2017, 01:29:52 PM »
Hi
Just some feedback
I tried both the 32 and 64 bit versions of the app today on a W10 Professional Notebook.
Unfortunately I get the following error on both versions:
"This application fails to start because it could not find or load the Qt platform plugin "windows" in "". Reinstalling the application may fix this problem."
After acknowledging the error message I get the following (which is probably normal due to the original error):
Runtime Error!
[Path]/MLVP App.exe
The application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
Cheers
Just some feedback
I tried both the 32 and 64 bit versions of the app today on a W10 Professional Notebook.
Unfortunately I get the following error on both versions:
"This application fails to start because it could not find or load the Qt platform plugin "windows" in "". Reinstalling the application may fix this problem."
After acknowledging the error message I get the following (which is probably normal due to the original error):
Runtime Error!
[Path]/MLVP App.exe
The application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
Cheers
20
crop_rec and derived builds / Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« on: June 19, 2017, 02:06:48 PM »
+1 here with a 7D. Can't code but can test.
I'm sure that there are plenty of lurkers waiting for something exciting to happen that they can assist with.
I'm sure that there are plenty of lurkers waiting for something exciting to happen that they can assist with.
21
General Chat / Re: Any cinematographers?
« on: April 18, 2017, 02:20:34 PM »
Or, you could just ask the questions....
22
General Help Q&A / Re: Need CLEAR concise and simple WORK FLOW to make MLV files WITH SOUND into Movie
« on: February 12, 2017, 09:49:05 AM »
Or you can use MLVP.
23
Forum and Website / Re: Nightly builds page redesign (static HTML)
« on: February 01, 2017, 12:38:33 PM »
No Still can't download them.
24
General Help Q&A / Re: Picture review after shoot
« on: January 21, 2017, 02:27:37 AM »
@hugues0509
Your Screenshots are not visible.
Your Screenshots are not visible.
25
Raw Video Postprocessing / Re: MLVProducer
« on: January 19, 2017, 09:22:54 AM »
@tufresh
MLV Producer is a Windows based product. If you want it on a MAC, emulation is the only way.
MLV Producer is a Windows based product. If you want it on a MAC, emulation is the only way.