Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Walter Schulz

#6751
Sorry, but I'm unable to understand what is actually going on. http://www.magiclantern.fm/forum/index.php?topic=9827.0 is *not* about installing ML!

Please clarify:
Which Canon firmware version is installed?
Which Canon firmware do you want to be installed?

#6752
Camera-specific Development / Re: Canon 7D
February 19, 2015, 10:20:23 PM
Not a dev, sorry!
#6753
Camera-specific Development / Re: Canon 7D
February 19, 2015, 10:17:10 PM
Yes, that's it. This one surely flew under my radar.
Thanks!
#6754
Camera-specific Development / Re: Canon 7D
February 19, 2015, 09:37:32 PM
I would love to do but 7D doesn't support ExFAT.
#6755
Camera-specific Development / Re: Canon 7D
February 19, 2015, 08:41:12 PM
Quote from: dlrpgmsvc on February 19, 2015, 08:39:45 PM
How did you manage to load ml on a 128gb card with 7d?

Why should there be a problem? This is not "stable" and nightly works just fine with bigger cards.

Quote from: dlrpgmsvc on February 19, 2015, 08:39:45 PMHowever kb cards are known to be slow and or defective in sone parts. A full scan of the card with verificatoon tools is recommended

The card is just fine. Tested with h2testw.

EDIT:
To all with a card 64 GByte (or bigger) and fast enough to write at least 30 MByte/s. Please select resolution and frame rate to adjust data rate above 25 MByte/s (or higher the better). If your MLV recording stops and message "Failed to open file. Card full?" is shown check file set size. Is it just 39.9 Gbyte?
And if recording doesn't stop before card is full: Please report back, too!
#6756
Not sure if this one is reproduceable out there.

magiclantern-Nightly.2015Jan29.7D203
MLV_REC.mo is the only module loaded.
MLV 1920x960 and FPS override set to 24. (Actual 24.028)

Tried 2 runs and recording stopped after 9:17 both times.

Recorded <filename>.MLV - <filename>.M08 (10 files each set) with 39.9 MByte.

First set size:    42,888,790,016 Bytes
Second set size 42,862,936,064 Bytes

Stopped with message "Failed to open file. Card full?"
Will not shut down. Had to remove battery and modules won't load because of shutdown problem.
Card: Komputerbay 1066x 128 GByte

EDIT: Checked RAW_REC.mo and had no problem to fill the card.


Somebody out there having similiar issues? What is going on here?
#6757
[ ] You have tested what I wrote.
You can assign any directory (=path name) to any drive letter not yet occupied.
#6758
General Help Q&A / Re: 550D download
February 19, 2015, 05:15:28 AM
Format card using a cardreader, download Canon's firmware 1.0.9 http://pel.hu/eoscard and reinstall firmware 1.0.9. Then start ML installation from scratch.

Text for 550D nightly page:
"Installation

You cannot use this package for first install. Download the old v2.3, install it, then replace the files with the ones from the nightly build. "
#6759
General Help Q&A / Re: 550D download
February 18, 2015, 09:50:44 PM
Format card using a cardreader, download Canon's firmware 1.0.9 http://pel.hu/eoscard and reinstall firmware 1.0.9. Then start ML installation from scratch.
#6760
Camera-specific Development / Re: Canon 700D / T5i
February 18, 2015, 09:17:01 PM
Quote from: neveripe on February 18, 2015, 09:12:55 PMIf not, could somebody advise where can one find version for 100D?

There is none at time of writing. See http://www.magiclantern.fm/forum/index.php?topic=5529.0
#6761
General Chat / Re: New Camera
February 17, 2015, 06:52:49 PM
His priority is dynamic range.
HDR and dual-ISO video are not (yet?) available for 7D.
#6763
General Help Q&A / Re: Canon 5d MK2 Pink Images?
February 17, 2015, 05:28:48 PM
RAWmagic is not supported here. Background info why: http://www.magiclantern.fm/forum/index.php?topic=13335
You may contact RareVision for their support or switch to other converters.

#6764
General Help Q&A / Re: 64GB Card and Yosemite
February 17, 2015, 05:12:58 AM
Please tell cam type, firmware version and ML version.
#6765
Share Your Videos / Re: Backyard wildlife with t3i / 600D
February 16, 2015, 11:44:16 PM
Sorry, but your recommendation for a 90 MByte/s card doesn't make much sense using a 600D.
600D's SD-card interface is limited to about 21 MByte/s.
#6768
Raw Video / Re: Raw video Version 1 vs MLV Version
February 15, 2015, 11:40:38 PM
It would be fine if you would be able to provide some samples backing your statement. MLV is pretty much RAW + meta data + (optional) sound.
#6769
Archived porting threads / Re: Canon 6D
February 15, 2015, 11:33:30 PM
Read first post thoroughly.
#6770
General Help Q&A / Re: 7D Focus Box Movement Issues
February 15, 2015, 07:25:43 PM
About "Ghost Image": Half-press shutter and Set. You should be able to move focus box.
Please confirm.
EDIT: Not that easy. But playing with shutter release and Set is able to free focus box. Have to find out what sequence is working.
EDITEDIT: Problems with Ghost image, focus box and 650D, too.

Community help required: Please enable Ghost Image and try to move focus box. Turn off and turn on. Exit LV and go into LV again. Please report results.
#6771
General Help Q&A / Re: 7D Stills Question-Nightly
February 15, 2015, 07:13:21 PM
And a possible bug will not be handled. Not that great ...
Those things tend to bite back ...
#6772
General Help Q&A / Re: 7D Focus Box Movement Issues
February 15, 2015, 07:10:57 PM
Nightly builds ML\settings directory is empty. That's the problem.
- Copy newest nightly contents over existing files -> Settings directory is not overwritten and CFG files are able to cause troubles.
- Delete ML directory (and Autoexec.bin) and copy latest nightly build files to card -> You start clean but - as intended - you will loose all your settings.
#6773
General Help Q&A / Re: 7D Focus Box Movement Issues
February 15, 2015, 06:22:58 PM
Delete contents of ML\Settings and retry.
#6774
General Help Q&A / Re: 7D Stills Question-Nightly
February 15, 2015, 06:10:32 PM
At time of writing there are 184 different nightly builds for 7D. You may want to tell which one you are using.
#6775
General Help Q&A / Re: 7D Focus Box Movement Issues
February 15, 2015, 05:38:52 PM
Try resetting cam to factory defaults (including C.Fn settings) and retry. If problem is still there: Zip your ML\Settings directory, upload it and link it here. Which ML version are you using?