Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Walter Schulz

Pages: 1 ... 268 269 [270] 271
Which version do you have downloaded and installed? This one, maybe:
This is indeed a "clean" alpha-2 version where HDR functions are not included.

Maybe it is a Nightly Build you are looking for.

Ciao, Walter

Feature Requests / Re: Focus bracketing, again :-\
« on: March 04, 2013, 11:08:24 AM »
Well, if you ever had the "pleasure" to run 2:1 magnify macro shots where focus stacking is essential and your only equipment is a non-motorized macro rail and no ML inside the camera ...
I can show you, if you like or better: *Force* you to do that, because you won't like it! <eg>

Seeing ML doing the job still gives me a deep, deep grin. This is an essential time saver and does wonders to your peace of mind. Especially if you ever had to redo some 30+ shots manually because you messed up a single one.

Don't kill this feature or I will kill myself! Well, kidding. But it will cost me some money for a commercial solution and there are transport issues involved.

Ciao, Walter

No offence to the thread starter but I think a translation would be helpfull:

===nanomed wrote ===
Behalte sie [drauf], Du koenntest sie irgendwann einmal brauchen. Sie schaden nicht und sie sind relativ klein.

Ciao, Walter

Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: March 02, 2013, 10:24:21 AM »
Don't know if it's obsolete or not: Tried to use focus bracketing with pre-alpha. Doesn't work for me, giving me focus error message.
Side effect: Wasn't able to use focus in liveview thereafter.
- Started camera with ML disabled (Set button pressed): Doesn't work either
- Started camera with card without pre-alpha ML installed: Nope, won't run
- Deleted all camera settings + Fn: Works fine.

Well, outdoor macro season is near and sometimes a camera with vari-angle screen will come handy. ;-)
On the other side: 7D will do the job too and a little yoga acrobatic is supposed to be healthy ...
Thank you all for all your efforts!

Ciao, Walter

General Help Q&A / Re: CF Card no longer works
« on: February 25, 2013, 07:21:34 PM »
Wipe the card using a cardreader, format it there (FAT32) and try to write to it. Success?

Ciao, Walter

Feature Requests / Re: bypass Write Protect SD for EOS550D
« on: February 25, 2013, 01:57:43 PM »
Good one!
This is a flash with internal 300V (or more):

(Source: Wikimedia)
and the thing on the top of the camera is a flash device, too.

"Flash memory" works at a much lower voltage level (18 V or less).

And, please: Don't mess up the pins on your own. Stay away, just don't. Not because you are running for Darwin Award but the pins are not very forgiving if treated the wrong way.

Ciao, Walter

Feature Requests / Re: bypass Write Protect SD for EOS550D
« on: February 24, 2013, 06:17:00 PM »
Is this the exact SD-Reader for the EOS550D, the SD-Socket-PP-19607.pdf?

I'm sure it is not! But if you show the data sheet to a solderer he will be able to determine where the pins are.

but i can't see what exact must be closed.

Just show the data-sheets to the solderer and tell him to connect WP to CD.

I'm asking because i first want to try from outside to bend the signal-wire to some position (open/closed)

Just don't. This is where hazard lies within.

yes i need somebody with equipment and high-voltage experience.

High-voltage? 5 Volts is not high voltage.

Ask for help in a german speaking forum related to electronics like

Ciao, Walter

Feature Requests / Re: bypass Write Protect SD for EOS550D
« on: February 24, 2013, 04:53:10 PM »
Not tested: You may have success shortening WP and CD pins.
If you are not familiar soldering such items: Ask someone who does. It's not recommended to try this without proper equipment.
You have to disassemble the cam.

Ciao, Walter

PS: Wondering why it may cause hazard to change code to use CD pin instead of WP pin as input. But I'm not a programer.

Feature Requests / Re: [WONTFIX] HTP: Raw off, Jpeg on
« on: February 22, 2013, 07:03:31 PM »
I think you have to reevaluate this.
I did a test in M with/without HTP and run the datt through dcraw, rawhistogramm.

Ciao, Walter

Archived porting threads / Re: Magic Lantern for 7D alpha 2
« on: February 17, 2013, 07:03:10 PM »
Almost as if the battery overheated or something even though that's impossible with no sensors. Strange.

Well, there are some components inside a battery pack. Overheating a LiON cell is not such a good idea therefore it makes perfectly sense to avoid this condition by adding a circuit breaker.
Disclaimer: I didn't disassemble it and didn't check the PCB inside. But I have a link:

Ciao, Walter

Archived porting threads / Re: Magic Lantern for 7D alpha 2
« on: February 16, 2013, 01:19:29 PM »
See first post in this thread.
This alpha version has to be activated each time you turn on the camera. This is installation step 4 as described.
Therefore: Yes, you have to copy it on each card if you intend to use this alpha version with both.

Ciao, Walter

The L does, too.


Êither your cardreader doesn't like your SanDisk card or (more likely) you have purchased a faked card -> product piracy or you have an USB 2.0 device.  USB 2.0 will be the bottleneck limiting transfer speed to about 40 MByte/s.
I have a Hama USB 3.0 cardreader not able to run at full speed with my SanDisk Extreme Pro. Kingston USB 3.0 is up to the task and > 85 MByte/s is not bad at all.
You haven't mentioned camera type, card type and cardreader type used. Please more details next time ...

Ciao, Walter

General Help Q&A / Re: T4i (650D) ML Support?
« on: February 07, 2013, 08:00:22 PM »

General Chat / Re: Canon 5D2 running on 5 volts
« on: February 07, 2013, 07:28:10 PM »
Thanks for the info but this is not the info we're looking for. Is a current limit (in Ampere/Milliampere/A/mA) given for the 7.2 volts output?

Ciao, Walter

Flares are common when shooting the sun (liberately or not) and other very bright light sources working as spot. See
As explained in the article the effect is sometimes added to CGI and other flare-free scenes to create a documentary look.

Even if the sun is outside the frame you may get some contrast reducing effects. If sunlight hits the front lens some will find a way to the sensor. A lens hood may not be able to block it out all the time. Just google around for
- veiling glare
- veiling flare
- ghosting
- lens flare
if you want to learn more about the subject.

In still photography it may be a solution takeing two shots when dealing with flare. One with a gobo (just some opaque stuff put between light source and front lens. Gobo = go between), one without and combine them in post. and have a flare/ghosting section in their lens reviews.

[Rant]It is a pity there is no standard test procedure covering flare/ghosting performance of a lens.[/Rant]

Ciao, Walter

General Chat / Re: Canon 5D2 running on 5 volts
« on: February 07, 2013, 09:46:55 AM »
Can't you just plug in a Y-adapter and connect both your devices to 7 Volt?  Don't know if you plate is able to run both devices at once (maximum output power exceeded or not?).

Ciao, Walter

I have to agree, this is lens flare caused by internal reflection. The reflections are centrically symmetric. Draw a line between flare "source" and flare. The line will go through the center of the frame. The distance from center to flare and flare source is the same.

Some protection/UV filters are prone to flare and nocturnal photography (extreme contrast and all black background) is really demanding in this respect. If you have such a beast for protection: You better go without at dark.
If it is the lens itself: Sorry, this one won't do the job. Old lenses (for example) are not designed for digital age sensors. CMOS and CCD chips are more reflective than analog film emulsions ... by far. Lenses designed for digital photography therefore have to use better coatings. Tokina will have to learn this lesson, too ... some day, I hope.

There is an UV filter review I would recommend for those looking for non-beastly ones:

Ciao, Walter

PS: If you're shooting stills with identical settings used for your video (ISO, aperture, exposure) under the same conditions you will have the same flares showing up.

Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: January 31, 2013, 06:15:18 PM »
Power switch set to "OFF", removed card, closed card slot cover, power switch set to "ON":
Displayed "Keine Speicherkarte" = "no card in camera" -> No problem to report from here.

Ciao, Walter

Archived porting threads / Re: Canon 650D [Status: Hello, world!]
« on: January 30, 2013, 10:04:19 PM »
Is "Trap Focus" not working in this pre-alpha?

Ciao, Walter

General Help Q&A / Re: 600d audio trigger for photography?
« on: January 29, 2013, 10:46:14 AM »
ML menu bar: Shoot -> Audio Remoteshot

Ciao, Walter

Archived porting threads / Re: Magic Lantern for 7D alpha 2
« on: January 23, 2013, 07:19:04 PM »
This sound very strange, myself and all the people I know that tried many times to downgrade the 7d from 2.x to 1.x were unable to do so, there was a test that we did whitin a photography forum and all owners got the same result.

He is not the only one. Try using older EOSUtility versions like 2.10.x.

Ciao, Walter

General Help Q&A / Re: Constantly having to install
« on: January 23, 2013, 09:12:05 AM »
Is this a known issue?

Yes, because it is intended to work this way ...
Alpha ...

Ciao, Walter

Archived porting threads / Re: Magic Lantern for 7D alpha 2
« on: January 23, 2013, 09:08:59 AM »
The only limit I'm aware of: Canon doesn't support downgrading firmware v2.x back to v1.x.

Ciao, Walter

Pages: 1 ... 268 269 [270] 271