Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - 350D

#1
Better way to stream live video from any supported Canon camera via OBS or any other software with Syphon support is to use this project - https://github.com/v002/v002-Camera-Live
#2
Some ideas about how to use this LED: blink on clipping (for self mode shooting mode or something like that) or blink if flash card buffering warning is happening.
#3
Hardware and Accessories / Re: Powerbank
February 27, 2018, 03:50:35 AM
I have old version of this power bank with single power cord and I've made few adapters for my cameras:





#4
You can create another layout with clean UI in ML and after than you should crop your captured image to remove black borders.
#5
Feature Requests / Re: IR Listening
July 03, 2017, 08:05:25 AM
Will be awesome to have an option to remap two standard Canon IR signals (S and 2S) to custom functions, like magic zoom, start/stop video and focus (I known about standard functionality, but without photo capture before start recording it will be better)
#6
As i known - SteadyXP uses audio channel to sync the movement data with video. Another idea - you can use custom app on your smartphone (gyroscopes, accelerometers) to record this data and then sync it in post somehow (sound, or trigger).
#7
Sorry for offtopic, but, is there any theoretical options to create a tool to convert LUT files to Canon Picture Style files?
#8
General Chat / Reverse LUT effect
September 05, 2016, 05:26:27 AM
Hello! I'm trying to create Instagram filters LUTs in DaVinci. How i'm trying to do that: I have a color calibrating chart (XRite) and i shoot two images: normal one with proper white balance and filtered one (screenshot from the Instagram where the filter already applied on my first image). Next - i can create my custom LUT in DaVinci using second image and Color Matching function for my color calibrating chart in DaVinci. But problem is — this LUT is about to convert filtered colors back to normal, so, how i can create "reversed" LUT based on this one? Or maybe i can create proper LUT directly in DaVinci, how?

If you have any other ideas about how to create LUT for my case, let me known!
Thank you!

Original image:

Filtered:

LUT (filtered to normal colors): https://dl.dropboxusercontent.com/u/6744412/filter.cube
#9
Correct me if i've missed something, but, any GUI or app available here for these scripts already?
#10
General Chat / Re: Sony A7S hack
October 13, 2015, 04:28:06 PM
Right now he looking for Java/Android developer to share source code with. Anyone can help?
#11
General Chat / Re: Sony A7S hack
October 12, 2015, 03:59:12 PM
Looks interesting so far. This guy still posting he's decompiling experience on twitter.
#12
General Help Q&A / Black bar on external monitor
September 05, 2015, 11:14:37 PM
Guys, any suggestions about how to remove this black bar on top of the video frame?



My 6D connected to external monitor via HDMI and i've tried all layout modes (16x9, 16x10, 3x2 etc) and to disable everything info except bottom and top lines.
Everything looks good on camera screen, only on external one i have this bar.
#13
Feature Requests / Re: Global Draw performance
September 05, 2015, 07:54:21 AM
I'm on 6D right now.
So, any thoughts about this idea?
#14
Guys, any suggestions about how to remove this black bar on top of the video frame?



My 6D connected to external monitor via HDMI and i've tried all layout modes (16x9, 16x10, 3x2 etc) and to disable everything info except bottom and top lines.
Everything looks good on camera screen, only on external one i have this bar.
#15
Any ideas guys?
#16
Still experiencing this issue with 1.1.6 build  :-\
#17
Camera-specific Development / Re: Canon EOS M3
June 11, 2015, 01:49:48 AM
Unfortunately the screen is off. Here is a screenshot of Blackmagic capture screen with M3 connected.
#18
Camera-specific Development / Re: Canon EOS M3
June 10, 2015, 04:18:11 PM
Guys, if you didn't known about that - very nice improvement in EOSM3: clean HDMI out! If you put your camera to manual focus to hide a focus box and switch layout mode with info button to clear the screen - you can get clean image without borders and gray frames. My setup includes hdmi2hdmi box, so, let me check it without this box today one more time just to be sure. I'm not sure about resolution too.
#19
Feature Requests / Re: Global Draw performance
June 05, 2015, 07:30:34 AM
I known the answer for question about clean HDMI on camera other than 5DM3 ;) My question is more about idea.
#20
Feature Requests / Global Draw performance
June 04, 2015, 10:40:33 PM
Developers, i have a question/idea for you.
What the maximum fps for global draw available? If you guys can scan full hd picture from sensor for RAW recording - how fast you can output this data on the screen? Is this possible? (theoretically, maybe with some limitations like less fps, less color depth etc.) or maybe you can use part of this data just to fill the missing parts of the image outside of the gray frame in live view to cover full image? Just curious about to get clean picture on hdmi out.

Right now i'm using ML to hide everything on the screen (focus frame, all info, etc) and then cropping black parts of the frame in my capture software and rescaling it to full hd.
#21
That was 1 or 3 fps settings, what you can recommend for 6D?
#22
@Licaon_Kter here is no workflow, movie recorded directly in camera using FPS override function.
@Levas no DNG available, this is a mov file from camera
#23
Check this video first:



on the second half of the video (night time) you can check for hot/bright pixel overlay.
What is that and how to get rid of that?
I'm using latest build for 6D and FPS override setup with low light value.
I've checked this one year old topic already with no luck...
#24
Camera-specific Development / Re: Canon EOS M
May 07, 2015, 03:32:21 AM
@DeafEyeJedi Check and update your "Custom function 7 " in Canon settings menu
#25
Camera-specific Development / Re: Canon EOS M3
May 06, 2015, 04:48:43 PM
Hello! I've updated my EOS M to EOS M3 a week ago. How i can help with development?