Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - aaphotog

#226
Seems as though dropbox compressed the video
here's a still taken from the video
If anyone knows of a website where I can upload the video(for free) with the best quality, let me know

#227
Recorded a very short video, I notice that it's underexposed a lot(on purpose) but I didn't bring the shadwos up any.
The lines ALSO show in the bright areas of the video as well.
I used the latest raw2dng(for mac)
I also used the ML from June 1st(I believe)
Any idea as to why these black bars are across the entire image???

https://www.dropbox.com/s/o9zasksokmkgubj/M01-2200.mov
#228
Is this for Mac?
Also, if it converts from the .RAW files to pro res video, what does it do about the whacky white balance??? Given that the files will no longer be raw, changing the white balance on a pro res file will not be of the best quality, correct?
#229
Quote from: a1ex on June 02, 2013, 06:31:29 PM
Half-shutter
Thank you!
I thought I tried that already. If not, foolish of me. Lol
#230
When playing back recorded raw video in the file browser, is there anyone to stop/cancel playback???
Sometimes I'd like to see what clip it is, before deleting, it takes a bit of time waiting for 1,000+ frames to play back.
#231
......
#232
Having an issue, anyone else had this happen?
I go from .RAW file to raw2dng(even 0.9)
DNG's into photoshop ACR
Export out of ACR to 16 bit .TIF files
Open image sequence in 'quicktime 7 pro'
now heres where the problem occurs. When I export out of QT7 as ProRes 422 or lower quality, it's perfectly fine.
But when I try and export as 4444, the video seems to be blank. All of the other exports have a thumbnail, my 4444 exports have a black thumbnail and when opening in VLC, it won't open.
I've converted to 4444 many nightly builds and raw2dng's ago, a couple of times. Now, Im not sure whats going on.
#233
Raw Video / Re: 1920x1080 RAW - real resolution?
May 29, 2013, 03:06:44 AM
What is this 1:1 crop thing?

is it still a 16x9 picture?
Does it give the same FOV as the normal 1920x1080 Raw recording?
#234
Quote from: squig on May 24, 2013, 06:26:53 PM
Got the 17 May build going.

So why wasn't it working?
#235
16GB Sandisk 600x
Have had no issues. Since the first time I put it in my 5d3 I'm able to get a steady recording of 1080p with ZERO dropped frames. Buffer doesn't blink more than one star.
#236
Quote from: ted ramasola on May 24, 2013, 06:08:44 AM
The devs have already noted this since the very first builds of ML raw, and that was recommended to testers of the nightly builds.
I think once every feature is stable , that this will be mentioned in setup.
I should suggest that if performance take so much hit when raw stills is enabled, that ML team should might as well automatically disable raw stills once raw video is engaged.

I do not like the idea of automatically setting this. I  am working with a 5D3 and I've tried setting my image quality to sRaw. Normally(with raw being selected) my buffer doesn't go beyond 1* and I can record until I manually stop recording(1080p raw). When I selected sraw though, I only got one second of recording before it automatically stopped on me.
#237
I do not like the idea of automatically setting this. I  am working with a 5D3 and I've tried setting my image quality to sRaw. Normally(with raw being selected) my buffer doesn't go beyond 1* and I can record until I manually stop recording(1080p raw). When I selected sraw though, I only got one second of recording before it automatically stopped on me.
#238
Ok, I have the Sandisk 600x 16gb CF. haven't had any issues recording. I can record until I hit stop without any dropped frames. I tried putting my image setting to SRaw and got a dropped frame in the first second of recording. I guess it has the opposite effect on me.
#239
Quote from: 1% on May 23, 2013, 06:22:31 PM
Just look at shoot_malloc size to see if its doing anything. Sraw gives more memory on 600D, Ljpeg works on EOSM. Haven't found any way to get more memory on 6D.. only less.

This would not affect write speed.
I thought the buffer gave an indication of how well your card was keeping up with the raw recording???

When you say sraw gives more recording, do you mean it allows more frames per space, or it allows the same amount of frames(and quality) but with less strain on the card?
#240
Quote from: haysuess on May 23, 2013, 05:23:44 PM
This was posted in the "Raw video on 5DMK2" thread, but I thought it was well worth mentioning in case it hasn't been seen by all.

If you have RAW selected as your photo type and record, say you get 100 frames at any given resolution and fps.

If you then change your photo settings to disable RAW and shoot only Small JPG, you'll get MANY more frames of RAW video.

It seems like there was 2-3 more *'s worth of buffer when I did this.

Benchmarks are the same, so it appears it just opens up some more buffer room.

In my tests, I went from 150-170 frames to 290 just like that! :)

I have a Sandisk 16GB 600x card and leave my photo setting with RAW only. When I record raw video, my buffer doesn't go beyond 1 star. Mind you, this is with only a 600x, so I don't think disabling raw images would make it any better.
#241
I believe I read somewhere of an issue as such(don't quote me), and the fix was to "reset to factory settings"
Try resetting to factory settings, reinstalling 1.1.3 then resetting factory settings again, then try installing ML
#242
Raw Video Postprocessing / RAW files in ACR
May 22, 2013, 08:44:00 PM
What is everyones 'sharpening' settings in Adobe Camera Raw?
Amount
Radius
Detail
Masking
#243
Quote from: mcnova20 on May 22, 2013, 06:26:49 PM
seems so!
i got a lexar CF 16GB 800x
and raw rec on MKIII doesnt work like a thought... so i need a better card like the komputerbay 1000x 64gb
btw. if i want to use the cam without Magic Lantern and i put the SD Card with Magic lantern off the cam... The Camera asks: "update file cannot be found. please check the memory card and reload the camera battery"
What can i do to use the cam without Magic Lantern?
turn cam on with card in. Once ML boots, do a format of the card(in camera). That way you'll be able to boot with or without card(but no ML)
#244
so the 600x has a sustained speed of 90mb/s, while the 800x are MUCH slower?
#245
Quote from: 5DanielMIII on May 21, 2013, 07:42:59 PM
That is what I did, and script "warning" was gone!! ;)

That is also what I did.

Also, I just purchased a 16GB Sandisk CF card. It says up to 90mb/s 600x udma7
I did a benchmark and it only gets about 80mb/s. but when recording 1080p video(about 82-84mb/s), it works perfect!
I've recorded up to 3500 mb and the buffer never went past 1*

I wanted to buy the 64gb komputerbay for only 30 dollars more, but I'm impatient and don't like waiting on things that I can't personally go into a store and purchase. So, for those with 75 bucks, feel free to pick one of these cards up! Speed is of no issue!
#246
on all of the latest compiled nightly builds I'm getting a "scripts dir missing" message upon loading.
Do I NEED the script folder on the card? Where can I find the folder so that I may add it to my card?
Also, if I were to just download the 5d3 alpha 1.1.3, would I be able to just use the scripts folder from that, without issue?
#247
I was going to buy a couple of the 64gb cards. People seem to say they are fast enough. BUT, there are others who claim that the cards are DYING. I did a  google search for konputerbay(not the specific cf cards) and they also sell ram. MANY people have complaints of the ram just dying out. Anyone been using these cards longer than a month?
#248
Following. As stated since the first release... MUCH APPRECIATED!
Didn't realize you were already 4 updates in hahaha

EDIT: How do I follow a topic(preferably with an email), that I didn't create?
#249
I read that a member here had the 64gb cards that he sent back after a couple of days because they died on him.

Has anyone on the boards had a 64gb card that could NOT record 1920x1080 without drop frames for 4gigs?
Also, has anyone here had the 64gb cards longer than a month without them dying?

I've read a few reviews on these cards from ppl who have had them for a long time without issue, but I'm sure that they weren't shooting raw video. I'd like to know if these can stand the test of time while shooting this 1080p raw
#250
Quote from: mageye on May 19, 2013, 02:18:59 AM
Today I finally got my KomputerBay Professional 32GB 1000x CF UDMA7 so I tested it ...  ;D

http://www.youtube.com/watch?feature=player_detailpage&v=Pf9iib286Vs
How long are you able to record for in 1080?