Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - GullRaDriel

#1
5DIII: To be precise there are some mode with realtime preview. Most anamorphic modes are giving a real time preview, even if distorted.
#2
You're welcome :-)
#3
Working fine on my 5D3.
I can see a difference between OFF/160/192/240, but no difference between SD50 & SD104 modes.
Looks like at best that Lexar card can only hit up to 72MB, but now nearly constantly.
At least I'm now able to record using 3k5 centered live view with sound continously :-)

Quote(Don't format SD card when the overlock is on)
I have no problem doing so on my setup, overclocked @240 MHz (yes, I re enabled it in my copy of Danne's source)
#4
Never had that problem before.
You may try to lower the video settings and or the audio output quality, try, and if it does not work use the way described by theBilalFakhouri a few posts ago
#5
Danne: I did not make any change but following the guides led me to some errors. May be my fault/ bad arm version / etc

Okay, as stated I'm going to seek help on discord. See you in a few days !
#6
Hi Danne,
I'm willing to contribute but I'm unable to make a build from source.
Can you give me some pointers on how to build https://bitbucket.org/Dannephoto/magic-lantern_dannephoto_git/src on Linux Debian or Windows 10 (msys2 or cygwin) ?
Or do you have a pinned forum post explaining exactly this ?
#7
160 MHz is the only one that's working nearly flawlessly on 5D3.

For last version: I tried a few presets and the feeling is good ! I'll try to save a bit of christmas on video. That's a first for me :-)
#8
Long time without posting.
Thanks for the work @Danne, I'm going to test your latest build tomorrow :-)
You're awesome. Thanks for your contributions !
#9
Share Your Videos / Re: Shanghai timelapse/hiperlapse
October 26, 2020, 11:15:50 AM
Thanks for the details. A lot of work indeed !
#10
Share Your Videos / Re: Shanghai timelapse/hiperlapse
October 25, 2020, 10:18:45 AM
Nice !

What was your shooting settings / lens / camera model ?
#11
I think he is talking about the vertical black stripes
#12
Share Your Videos / Re: Sardegna (UHD and 5K with 5D3)
October 07, 2020, 09:27:46 PM
Wow. Thanks for the informations, I wasn't aware of the automation between anamorphic and MLVapp, and I was thinking a real anamorphic lens was needed to record. Big news, I have moar tests to do ^^
#13
Share Your Videos / Re: Sardegna (UHD and 5K with 5D3)
October 07, 2020, 07:01:11 PM
Hello, first: nice video and thanks for sharing your settings with it !

Now the questions ^^ :
-have you tried Danne's latest since the august 15 build ?
-When you shot on anamorphic, what kind of lens have you used ?
-Were you using sd overclock ?

One more time I thanks you for sharing your experience with us.
#14
Looks good to me. @Quentin I think it's more a question of settings and shooting conditions than Danne's ML version.
#15
Latest tests on latest build:

I got some strange crashes when I tried to record without having x5 on (using 3k 1/1)

But on the other tests with presets 3K x5, it was working and I had a working colored x5 preview while recording.

Very good effort !

I may do some more tests with whatever you come with, but not until friday (busy IRL).

Good job and thanks for the time you're giving us.
#16
Hello Danne.

Thanks for the build. I'm on firmware 1.13 and with your latest build I have a flashing liveview, alternating from parts of what is in sight with strange colors to full colored pixel view (like a TV without a channel).

Whatever the mode set it's not working and generating corrupted messages and asserts logs if I try to record.

I've tried numerous settings (spanning on/off, various résolutions/bitdepth), no one working.

@70mm what firm are you using ? 1.13 ? Have you wiped the SD before putting the new build ?
#17
Reverse Engineering / Re: LiveView Investigation
September 07, 2020, 06:57:59 PM
How can I test this on the 5DIII ?

I have firmware 1.13 and I can compile ML myself, at least for 5DIII. Is there a repo somewhere where I can download a file, or did you just go with atgd gui ?

Well, all said: is there something implemented already ?
#18
I'll also try a normal and long record with audio, at the highest possible continuous setting for my set up.
Pretty sure that if the processors are busy doing audio and video encoding the write speed will lessen. That, and or the various bus's that can be more used and thus limiting bandwidth somewhere.
#19
Yeah, I agree that fps overriding is somewhat helping, not doing that much encoding.

First I used MLVapp and 60fps setting and generated a 32GB avi.

Then I used Handbrake and vimeo/youtube 4k setting and got a 171 MB video X-D

Anyway, the video itself (please note that ATM youtube is still processing the highres version):

#20
Everything is working so far for me.
I'm currently trying a timelapse with fps override @2.5 and raw 12bits video.
I've attached a photo for the stats, continuous.
And for the video itself, it is still recording atm.

Speed is a total of 179 MB/s
#21
I'm on the August 15 built from Danne's repo (see the commits for the little changes between 14 and15 build)
Never experienced such a thing as a sticky x10.
Crop rec can force it to x5.
What settings were you using ?
#22
Are you using Sticky DOF and 10x crop aid maybe ?
#23
It is sure very interesting, if you search for someone I'm willing to test your next MKIII build  ^^
#24
Can't wait to test it ^^ Very good hunting job !
#25
Yes, photo mode.
Trying your module now.
Edit: reverted to previous. This one is unstable, gives me err02 and full card errors